Tecra S10 - Does battery stops if it is full load?

Similar Questions

• Tecra S10 does not hibernate on XP Pro

  Hello

  Tecra S10-10th with factory v Bios 1.60 (localozed in Polish). All new opened its doors today.

  Everything works except that the machine hangs during the return form XP hibernation mode.
  Recovery DVDs contains XP Operarting system preinstalled Service Pack 3.

  Tecra freezes after completing the progress bar white together for recovery XP (progress bar) at the bottom of the black XP start screen.

  No additional apps installed - PC brand new, created from plant Toshiba Recovery DVD with XP PRO SP3.

  Please help me.

  Hello

  I put t know if it will be useful or not, but one of my friends had a Tecra S10 and Windows XP froze from time to time

  He has updated the Authentec fingerprint software and this was the solution!

  The necessary software update can be downloaded from the page of European driver for Toshiba!

  Find out!

• Stop premature when battery reaches (about 45%) of full load up to 100% on G6

  I charge the laptop and stretches of maximum battery does not charge 100% no question there!

  I use the laptop and while the battery indicator shows about 45% the laptop turns off.

  Try to start and stops down immediately.

  I started without battery that allows me to use the laptop as a normal function.

  I then attached to the battery and rebooted and retried to see if this solves the problem of closing.

  No will.

  Is there a setting that might involve the change?

  Furthermore, what could be the problem? Battery or laptop itself

  Laptop is 6 months old.

  Great! Now, you can contact HP and arrange for a replacement battery for you will be sent. You will need to provide the ID of default Service HP engineer when you make contact.
  
  The ID of the error code and failure are what we were looking for. What explains the problem you had.

  Kind regards

  ERICO

• My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  * Original title: charging the battery

  My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  How can I get the computer to start the battery again?

  The battery is probably faulty. You can say as follows:

  1. Shut down Windows.
  2. Remove the battery.
  3. Wait an hour.
  4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
  5. Insert the battery.
  6. Wait an hour.
  7. The power supply is hot? If so, the battery is recharged.
  8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.

• Tecra S10-I can't boot from the battery alone

  Hello

  I replaced my laptop battery and once I installed the battery pack with a compatible battery Toshiba-no, that my laptop won't start not from the battery alone (Tecra S10-114) after starting was performed by the power adapter (without fixing the battery), I installed it and the OS (WIN7 Professional) recognize and recharge the battery regularly.

  I can unplug the AC and the laptop works fine until there is enough battery power. Battery plug is almost the same as the original (5100mAh - 1BRS PA3588U 10.8V) - 10.8V 5200mAh replacement battery Toshiba PA3588U-1BRS PA3356U, etc..

  Can you help me understand why he has just this problem starting and the rest works well?
  You have a solution?

  Thank you
  Luca

  > I replaced my laptop battery and once I installed the pack of battery with a compatible battery Toshiba not my laptop does not start from the battery alone

  Maybe you should use a Toshiba original battery.
  Get in touch with Toshiba ASP in your country that could send you an original and right part that is compatible with the laptop.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Hibernate does not work on my Tecra S10-101

  Hibernate does not work on my new Tecra S10-101. I searched the internet but
  has not found a good solution. Cuisne someone provide help to solve this problem?

  Kind regards

  Bert

  Please explain the problem more.

  What do you mean by "does not?

  You can enter at least hibernation?
  Pick up from the hibernation failure?
  Hibernation is missing in power options?
  Are you running XP or Vista?
  What Service Pack you have installed?
  Did you install your own version of Windows or is - what a correct installation of Windows from Toshiba?

• Tecra S10-128-Vista 32 - eSata does not work?

  Hello everyone,

  I have 2 external hard drives USB\eSATA, an AKASA 3.5 and a VANTEC 2.5, they work fine in USB mode, but in eSATA, I get no response from the TECRA S10-128.
  The wealthy drive 3.5 does not need external power, the 2.5 power, when I connect the cable, is not a led flash.

  The OS is 32-bit previously connected original Vista.

  All ideas, King regards,
  FERRETE

  Now, I realized that the Tecra S10-128 is sold only to the Portugal! Here you can see what losing bean you'v: p.

  http://PT.computers.Toshiba-Europe.com/innovation/product/Tecra-S10-128/1060596/toshibaShop/false/
  .

  .

  Hello

  > They work fine in USB mode, but in eSATA, I get no response from the TECRA S10-128
  I was a little confused m
  As far as I know that the laptop supports the eSATA/USB combo port it s on the left and it conforms to the USB 2.0 standard.

  A (HDD) connected eSATA device cannot be recognized unless it s connected to the eSATA port, while the phone is in standby or standby.
  In this case, disconnect the eSATA device and reconnect it while the Tecra is turned on.
  Usually, it takes about 10 seconds until the eSATA device would be recognized by the laptop. Don t try to disconnect and reconnect the drive before this period has elapsed.

  In your case, I would check the BIOS settings.
  The second page of the BIOS provides eSATA settings. Check it out.

  I also recommend the installation of the OS switching device Configuration.
  This can be done as well in the BIOS

• X201s battery recharge does not stop automatically

  Assalamualaikum and Hello,

  I noticed that there is a battery for battery maintenance support which will be automatically starts the charge when the battery reaches the minimum and maximum stops when we were determined. But I tested a few times before with this application and discovered that my battery does not charge to 90% that I put, instead it keeps charge up to 100%... (I hope that the battery is not overloading)...

  So, I wonder if this application actually works or not (or maybe I need to update some drivers maybe)... Coz I thought I could leave the laptop charging and automatically stops once it has full- or achieve the maximum parameters at the same time, I could do another job... Someone help me please...

  Hello Hall ~!

  Try to update the BIOS, Power Manager, power management driver and see if it stops at 90% load.

  If it does not load despite the threshold then try to do a reset battery meter and see if that helps.

• Tecra S10-106 does not see the HARD drive 1000GO

  Hello

  I bought a 1000MB HARD disk and build in on a TECRA S10-106.
  The HARD drive was not identified.

  Do you have an answer why?

  Thank you for the help

  Hello

  He recognized the HARD drive in the BIOS?
  If not, then possibly the BIOS can't handle this HARD drive because of the size
  Try a 500 GB or 750 GB 2.5 HDD

• Tecra A3 battery stops the charge after a second or two

  Hello

  I used the computer without the battery for a long time. Now, when I try to use the battery it is completely empty (it shows 0% º capacity).

  It starts to load when it is plugged in, but after a second or two, he stops, so it keeps the ability to 0%.

  The problem of any ideas of what can be?
  Thank you

  Hello

  Are you sure the battery stops charging to 100%?
  How have you checked it? What is the status of the battery LED?

  If you plug the battery of the laptop must be turned off.
  In addition, the charge process takes several hours if the battery is empty.
  I think you should connect the AC to the laptop and several waiting time.

  But if the battery will not charge, either the battery is dead or the portable electronic malfunctions.

• Tecra S10-11 a - frequent faults and long service life

  Toshiba Tecra S10-11 has, PTSB3E-01900GG3
  Purchase date: 14.08.2010.
  Expiration date of the warranty: 12.08.2013

  For 16 months, the computer has more than two months of service!
  It is currently in service (exactly 505 days, 65 days in service. (Terrible!)

  First rehabilitation 17/02/2011 the problem with the sound. Repairs took about 40 days (I don't have a computer for work replacement)
  Second recovery 25/12/2011 the problem with button walk / stop. The computer is still in service (I don't have a replacement of the computer for work)!

  The frequent failures with a very long period of repairs influence a lot on my work. In addition, I have to present and take the computer in Belgrade which is located about 220 km from the city where I work.

  Please consider, Toshiba as a company with a good reputation, the complete replacement of my computer because I am a user in a company and I got high cost caused by failures.

  Unusual sound that you indeed have to wait as long.
  But I think that this does not apply to all Toshiba FSA.

  A friend of mine had some problems with a mobile satellite. Don't know what the problem was, but the whole procedure took 6 days. The technicians were very useful.

  I hope that someone will get in touch with you in order to solve this annoying problem.

• Tecra S11 - 11 H - stop with the fan turns

  Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.
  Pressing the power button / stop a few seconds turns off the machine and shut the fan.

  Support put me to upgrade to the latest version of the prints digital-device driver, but I found the software, no drivers.

  They also told me to upgrade the bios to the latest version.

  Problem is that this update of the bios will not start. He complains about power cord power supply not connected or battery power is low.
  The two isn't true - power cord is plugged in and the battery is fully charged.

  What could I do?

  TIA

  LGKF

  Hi lgkf,.

  Yes, I think the support from Toshiba is just because I found this article on the Toshiba page:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software can help you get rid of this problem, then you must update the software of fingerprint. The pilot is a part of the software, then download the package for fingerprints on the Web from Toshiba site.

  Uninstall the older version, reboot and install the downloaded version.

  Check this box!

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• Re: Tecra S10 and S11 freeze randomly

  We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.

  The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.

  However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.

  Everyone recognizes these "frozen moments". It's very annoying.

  It is not easy to say why this is happening.
  Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.

  Maybe something else responsible for this?
  Maybe are all connected to your business LAN and there is a problem.
  Are connected external devices which can be responsible for this?
  Maybe some internal software of the company is blocking something.

  It is not easy to say what he can be.

  Have you done tests in the past to see what can be the problem?