Camera card writing problem
I have a camera that uses SD cards - I have 4 GB, 16 GB & 32 GB cards. I have photographed and then plug the card into the computer to copy them. So I want to remove them. Sometimes, I can, but usually I can't - card SD appears protected write, for (in general), I can't copy anything on the card either.
No, the write protection switch is "unlocked." Remove the card and put it in the camera, and I can then delete the pix.
USB memory sticks never give this problem; only SD cards.
It would be maybe my Bit Defender antivirus?
WHY do sometimes; and how can I mount it?
Hello
I was unable to write or erase on SD cards, but have been able to read OK. In my case, I reduced to a faulty card reader. As you experience the same problem with several cards on the same drive, your drive peut also be at fault.
I would like to try the card in another computer/drive to see if they work reliably there.
Stick USB card readers are cheap if you decide to replace it.
Tags: Windows
Similar Questions
-
Hi, I use lightroom 5 and have been for several years. Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter. I see other people have had similar problems, but I am not able to follow these solutions and would very much help here. I have an IMac.
If you had probably two problems
Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.
-
How can I download photos from my camera card in the small front port?
How can I download photos from my camera card once I put it in the small harbour in front of the computer?
Hi Islarich,
Thanks for posting the question on the Microsoft Community Forums.
According to the description, it seems you are trying to download images from the camera.
It would be great if you could answer this question in order to help you further.
You connect your digital camera to your computer using, USB cable or a memory card?
To download the pictures from my camera to the computer, refer to the following Microsoft article:
How can I get pictures from my camera to my computer? http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-get-pictures-from-my-camera-to-my-computer
Troubleshoot camera connection: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-camera-connection-problems
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
USB and camera card readers do not appear in Microsoft Explorer
When I open Windows Explorer, my USB drives and camera card readers make their appearance is no longer. They always showed up there in the past. Can someone tell me please how to make them reappear?
I tried to plug something on them, but readers still are not displayed.
Any help is appreciated!
Hi joym126,
1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager
a. Click Start, type devmgmt.msc and press to enter.
b. research of universal bus controllers
2. run the patch from the link below: Tips for solving problems of USB devices:http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
6 Lightroom does not open when the camera card is inserted
Hello. Tonight I just installed LR 6.0.1. I have LR 5.7.1. I disabled autostart with import of camera for LR 5 card and turned on in LR 6 - but LR 5 continues to open instead. I also have LR 6 chosen in settings of Windows Autorun for camera cards - but he continues to insist on the opening of the LR5 to import the contents of the card. What should I do to convince LR6 to open rather than LR5?
Gets a bit confused with autoplay Windows when the two versions of the LR installed.
There is a thread here that shows you how to modify the Windows registry to resolve the problem, if you are ready to go this route.
Windows 7 AutoPlay does not work with Lightroom 6; Lance LR5 instead
-
How can you generate a map of camera report.
I still have a blank page
Thank you
Camera card report lists down all the clichés present in the scenes in the order of shooting.
If you get a blank page:
(1) make sure that you have added the camera shots in the script that you created the calendar. You can insert a camera turned in the script by clicking on 'Camera Shot... "under the menu 'Production '. In this step, you must correctly enter field "camera".
(2) make sure that you enter camera good number in the report dialog. This value must be the same 'camera' field entered in step above.Let us know if you find again no problem in creating camera card.
/ kamal
-
This program automatically rises when the camera card inserted
at the same time, I had this program. It would allow a certain number of things. Now I don't have and I don't remember the name of the program. It would come as soon as the camera card has been inserted.
The program was Windows File Explorer. Please note that this issue is really to do with Firefox, so it is not the right forum to ask this question, although I'm happy to help you. To find this program, search file Explorer in the start menu.
Have a great day!Jon
-
Is it possible to invoke the pure qml camera card?
I saw how in c ++, but prefer to keep in qml. Seems not work although
For reference, see
https://developer.BlackBerry.com/Cascades/documentation/device_platform/invocation/camera.html
Invocation { id: cameraInvocation query: InvokeQuery { invokeTargetId: "sys.camera.card" invokeActionId: "bb.action.CAPTURE" } }
I try to trigger it with
cameraInvocation.trigger("bb.action.CAPTURE");
In the console, I get:
Warning: 16:42:14.882 InvocationPrivate::setQuery: you are not allowed to change InvokeQuery object Warning: 16:42:16.941 InvocationPrivate::onQueryResolved: query failed, no armed signal sent.
It looks like the good feature of ae request
-
I have a hp laptop with Windows 8.
Whenever I turn my laptop on, it flashes with a blue message appearing saying "your PC came across a problem..." »
I tried repeatedly pressing f8 as soon as I start my pc, however nothing appears when I try this.
Is that what I can do to fix this?
Original title: System Restore
Hello
Check with the help of HP, their online documentation and drivers, diagnostics and ask
in their forums on known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
In 'some' case will help this article.
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
online systems), their resources and the drivers and ask in their forums (if any)
on known problems. Don't forget to update BIOS, drivers of low level chipset,
and the other pilots of major on-board and separate devices. Those who alone can
set all or part of these issues.Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8.
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Start Windows (applies to Windows 8). If you cannot start Windows 8 try using a repair
Disc (see methods of doing a below) to access Mode without failure and other troubleshooting
steps.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
second or so time of the BSOD to provide more information as possible
cause: see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html===========================================================
Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you have need of a system repair disc or other methods:
How to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlHow to create a recovery USB in Windows 8
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html
How to start on the "System Recovery Options" in Windows 8
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlBoot to the tip "Startup parameters" in Windows 8
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Why my lightroom does not find my file unless my camera card is in the card reader
I imported the photos from my camera card and created a collection. I then remove my the USB card reader. When I try to edit photos in lightroom, it says "file is not found." It is the folder if I set my camera card in. It seems that my collections are stored on the card in my camera (is this possible?), but I don't know how this could happen or how to fix it. Help?
HI Robert,.
It seems that when you imported the images from the card you added in the catalog instead of making a copy. in the window at the top import, we have the option 'copy as dng', 'copy' , 'move', 'Add '.
choose copy, and then on the right, we will get the destination Panel. in which we can choose the destination in which we have to copy the images from the card.
Thank you
-
Copy photos from a camera card
I would like to copy some of the pictures that is held in the Organizer in format raw CR2, without losing them in an original format in the Organizer, camera card and convert them to JPEG or similar on the camera card such that they can be read by machine to store photo processing. Is this feasible?
Terry
Select your CR2 files in the Organizer, and then click on the file to export As New
Choose Jpeg.
-
iMac 27 2010 graphics card / ram problem
Hello - read through the form and try to isolate the problem. A week ago my end 2010 iMac 27 I7, 12 GB of Crucial Ram, OSX Yosemite went screwy - icons went fuzzy, and the system has just stopped responding. I tried not just pull the plug, but the computer was out of order, so I had to pull the plug. Please keep in mind it was a day hot here in New York and I've come for a quick moment to remove some files and did not close the windows a turn on the AC, so they probably overheated system or so I guess
Anyway, after a few hours and I came back home and turned back on the iMac. Immediately, I noticed some pale red bans on the screen. The system has been restarted slowly and then it stop at halfway however and just go to the gray screen. I did a reboot, re-installed the operating system made the system check, but the failure of operating system to kick when I do a normal restart, and I am only able to operate the computer in Mode safe.
Is there a way I can understand if the RAM is the question, the graphics card, or if it's the OS? A faulty graphics card will prevent the system from starting normally? I have the same question when I open it on safe mode?
I'm trying to see if there is a way to save the iMac and get more use out of it, but at the same time a few years if it's gong to fix an expensive that I can't do on my own, so maybe its not worth what's now 5-6yrld of fixing iMac little matter how the computer cost me back in 2010.
Thanks for your help and sorry if this question has been answered countless times before.
JB
Most likely graphics card problem...
Note:
One way to test is to boot from the HD, (now shift key at startup), run utility disk in Applications > utilities, then highlight your reader, click on repair permissions, test for problem in Mode safe...
PS. secure boot can remain on the gray radian for a long time, let go, he's trying to repair the hard drive & trash/rebuild the cache files
Reboot, try again.
If it does so only in ordinary chest, there could be a problem material such as Video card, (the Quartz is disabled in Safe Mode), or airport, some USB or Firewire devices, or the module in part 3, Check System Preferences > accounts (users and groups in later versions of OS x) > login items window to see if she or something relevant is listed. Or a stray process eating RAM.
-
Satellite L50 - A - 1EH NVIDIA Graphic card driver problem?
Dear users,
The day before yesterday I bought a Toshiba Satellite 15.6 L50-A-1EH model n: PSKK6E - 07Q05CDU
By far I love the device, but I get BSOD notice whenever I start a game (probably because Intel on Nvidia?). I have a NVIDIA GeForce GT M 740 and am running Windows 8.1 64-bit.
The problem may be caused by the fact that I updated the Nvidia driver for the first time to use my laptop. I have uninstalled the driver through Device Manager and reinstalled the Nvidia driver of [here | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=NL&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7948 selSh 3983 = ortMod & language = 12 & selOS = 47 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = all & page = 1 & ID = 88288 & DISO = 47 & driverLanguage = 42]
But the BSOD came back. Yet once again, I deleted the driver currently installed and tried to install a new on the nVidia site itself. Yet again, my game crashes and I get an error.
The error I get is:
Unhandled Thread Exception systemAny help would be greatly appreciated. I'm not that good at computers please keep this in mind.
Thank you very much!
Hello
I found some people more in the Microsoft forum having the same problem with the error message: System unhandled Thread Exception
It seems that the nVidia driver compatibility problem between the driver and the software running (in your case the game)
Try to remove/uninstall the old driver in Device Manager, and then remove the Nvidia folder on the C: drive. Then, restart the laptop.
Try installing the latest driver nVIdia driver Toshiba UE page.
The same graphics card was built in different Toshiba notebooks like:
Satellite C50
Satellite C55
Satellite L70
Satellite M40T
Satellite P50
Satellite P50T
Satellite S50
Satellite S50T
Satellite S70
Satellite S70TI recommend you to check the GPU driver published for these units
-
Hi all
I have a VI that puts in place a continuous grab for four camera link cameras at 100 Hz (512 x 640). I have the cameras running on an external clock of 100 Hz for synchronization (comes from box NI DAQ, trigger ports on 1430 cards are not connected to anything). The VI sticks all the frames in a queue, and then I (slowly) he writes to disk after that I get what I want.
The problem is, for a minute 4 capture, I get only about 14 000 items in the queue instead of 24 000. Also, each image gets populated with a number of buffer, so I can see it is missing all the other images or something like that, sometimes it will jump 10 in a row, sometimes it will jump rare... any ideas?
Here is a picture of my installation of collection (Scripture on the part of the disk is not displayed, but that pours out of the queue is fine)-
Hello
I see a number of problems with the approach in your VI that I'll try to cover...
Your consumption with queues and images won't work as you wrote because the images are a type of reference data and so put them in the queues is not copy data values, only the references. So if you keep to the same reference to the image in a queue, they are all pointing to the same data of the image (which may be substituted).
A better approach is to have two queues of images, representing the 'free' pads and then one that represents the images 'full' (your queue current consumer). You would then have your acquisition loop pull a 'free' image, fill it with data via a Get buffer call and then queue it for your use. Your consumer could pull this queue, do its thing and then queue the image to the queue 'free' for the producer to use again.
In addition, your code does not currently use the lower level is VI buffer, so you take advantage of the buffering model input-output IMAQ uses internally. The simple Grab acquire VI returns only the most recent image, but if you fall at all it does not use the FIFO. You want to call make buffer with a buffer incremeenting number so that you do not skip the buffers and are allowed to get behind up to the number of buffers in the buffers configured list.
Eric
-
My Pavillion Elite cannot read the memory card from my digital camera from Canon. It doesn't matter if I use the provided by Canon or the SD/MMC slot USB card reader built into the computer. I have no problem loading the pictures of my old Olympus via the old fashioned the USB cable. What gives?
Hello Katusha, here is a link to Amazon that shows some criticism for your card reader. Many users don't give good reviews this card reader. It seems that this card reader costs less than $5,00 USD, it might not be very good at this price there.
Since it is a USB plug, no driver should be necessary that the drivers already installed for the USB ports, which would be included in the chipset driver package.
Wb2001 suggested, the best way to download pictures from a camera would be via a USB cable connected from the camera and connected to a USB port on the computer.
I suggest looking for a compatible USB cable for Canon camera, which would connect to the USB port on your computer. It would be the best and fastest in the long term.
Maybe you are looking for
-
Problem with the playback list in Safari 10.0
I upgraded to Safari 10.0 and can no longer remove items from the playlist. The small x in the upper right corner that appeared does not work. MacBook Air 2013 El Capitan 10.11.6
-
App Store takes awhile to load iOS updated 9.3.2 to level after
I opened the App Store application and the loading circle appears and stays there. It does nothing, it sticks. I have upgraded to iOS 9.3.2 a few days ago and now does not load the App Store. Is there something I can do?
-
My iPad 2 Mini is frozen after put 9.3.1 update
How can I restart my iPad Mini 2 after it completely closed after IOS 9.3.1 update >
-
I tried all the ways suggested to correct this error code and nothing works. Do I really need these updates? What other r there suggestions to solve the problem?
-
Post for sale not listed do not
I'm submitting my request for Playbook called 'Perlin Trip' to the AppWorld. I initially introduced him during the offer of the playbook and I got my first accepted package. Until I posted it, he then refused because it was compiled with an old SDK.