Camera to computer upload problem

Similar Questions

• Webcam in car open failure. Please resart camera or computer

  Hallo ich hab since 2 weeks problem mit meiner out nur noch sharp message open drive Webcam Webcam fail. Please resart camera or computer

  Eure thankyou hilfe das die geht wieder Cam weil ich sie as skyp thankyou

  HAB schon so viel bei google read leider hat nichts helped neue treiber von webcam und waren auch ohne erfolg bios

  Hello, I was 2 weeks no problems with my webcam only this announcement Cam open disk fail. Please resart camera or computer

  that need your help for the cam will come back because I need to skyp

  have read so much about google, unfortunately, has nothing to help the new webcam drivers and bios were also without success

  Please help me

  Webcam in car open failure. Please resart camera or computer

• Code for a Chicony 2.0 webcam, declaring: "Webcam driver open fail. Please restart camera or computer. »

  I have a M-6752 catwalk model who had a webcam chicony 2.0 integrated. Recently I started to receive an error message stating, "driver Webcam open fail. Please restart camera or computer. "I tried to uninstall, change and repair the pilot, as well as uninstall the program and replace offline without success. Are there any suggestions as to why this device has stopped working and how do I fix the problem? When I bought my laptop it had windows vista Home premium installed on it. At this point I don't know what to do other that perhaps do a restart of the system and see if it helps maybe or perform a factory reboot and operate as I had when I first bought it. Any suggestions on this subject?

  Hello
  As you said, he has worked in the past, I think a system restore can be of help to you.
  Please see this link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  However, if it's really the real physical hardware that went wrong, then you need to talk with the gateway. If it were an external camera, I would say that to visit the manufacturer's website, but as it was built into the computer, I'd say your best bet is with bridge.

• Microsoft never call houses and tell them that their computer has problems?

  Original title: scams?

  Microsoft never call houses and tell them that their computer has problems?  Some guy called who I could barely understand and wanted to guide me through some things.  They said they got my # registration of Microsoft.

  Fake phone calls to technical support

  Such unsolicited telephone calls are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft does ever not requested for telephone calls of support or security.

  (such persons may use names other than Microsoft as well)

• Impossible to restart webcam error: Webcam Driver open fail. Please restart camera or computer.

  Webcam driver open failed. Please restart camera or computer.

  When I try to activate my webcam my on my laptop a window comes up saying "Webcam Driver open fail." Please restart camera or computer. "I restarted my computer. I don't know how to restart my camra. Help, please. Thank you

  Hi Joe627,

  ·        Is the webcam built into the computer, or you are trying to connect it via USB?

  ·        What is the number and model of the webcam?

  ·        You have installed the drivers for the webcam?

  Uninstall the web cam program and features and reinstall it back you can reinstall from the CD provided by the manufacturer or the manufacturer's Web site. Steps to uninstall the program and features:

  a. click on start
  b. Select Control Panel
  c. choose the program and features
  d. Select the Webcam program and uninstall.

  Link, you can see:Uninstall or change a program: http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

  I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

  Hello, Dorian,

  If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

  If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• problem with uploading photos from the built-in digital camera to computer

  I plug ZTE 102 mobile camera integrated in the computer to download photoes on computer Assistant (my Photoes) don't complete not the task because it dosent reconise the camera in his list of choices

  Hello

  1. what error message do you receive when you try to connect the phone to your computer? 2. this working fine before?
  3 have you tried to connect to a different USB port?
  4. another USB device works on your computer?

  To connect the phone to the computer, you need a PC suite installed on the computer.  If the phone manufacturers have supplied PC suite CD, then install the software on the computer.

  Perform a clean boot and check if it helps the wizard to finish the task.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure you place the computer in normal mode when you are finished troubleshooting

• My sony camera fails to upload my pictures on my windows 8. How can I get my computer to stool

  I can't download my pictures from my camera digital cybershot from sony to my new windows phone 8. Can you help me understand this? My computer does not recognize my camera, I don't think.

  Hey there ptunya!

  For us to check the specifications of your computer, please provide the name of the exact model of your laptop.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

  bit.LY/LapMagWin

• Transferring images from the camera to computer

  A couple of months, my computer has a virus which attacks the operating system.  I took the computer to a store of trusted computing for repair.  To eliminate the virus, technicians used a program called Combofix.

  Before the virus, all I had to do was connect my camera to a USB port on the front of the computer.  I would like to hear a Ding-Dong and pop up would be a menu asking what I would do with the photos - several options.

  After that the virus has been removed with Combofix, I tried to plug in the USB port of my camera and I hear the Ding-Dong, but the menu does not appear.

  I tried to disconnect my scanner of it's USB port and plug the camera on this port, but I get the same results... a Ding-Dong, but no context menu.

  I also have a hard drive external Buffalo for backup of photos and documents, and if I plug it into a USB port, the computer does not recognize that it is plugged.

  I tried plugging my camera into my daughter's computer and there is no problem - I get the Ding-Dong sounds and the menu appears.  I resorted to uploading my photos to my daughter's computer and have their email to me.  But that's getting old... for us two.

  In troubleshooting, it seems that there is nothing wrong with the USB ports, or is there something wrong with my camera or an external hard drive.  There must be something in the Windows XP program which is now off and not to recognize an external device, like the camera or external hard drive.

  Tell all about how to solve this problem?

  A couple of months, my computer has a virus which attacks the operating system.  I took the computer to a store of trusted computing for repair.  To eliminate the virus, technicians used a program called Combofix.

  Before the virus, all I had to do was connect my camera to a USB port on the front of the computer.  I would like to hear a Ding-Dong and pop up would be a menu asking what I would do with the photos - several options.

  After that the virus has been removed with Combofix, I tried to plug in the USB port of my camera and I hear the Ding-Dong, but the menu does not appear.

  I tried to disconnect my scanner of it's USB port and plug the camera on this port, but I get the same results... a Ding-Dong, but no context menu.

  I also have a hard drive external Buffalo for backup of photos and documents, and if I plug it into a USB port, the computer does not recognize that it is plugged.

  I tried plugging my camera into my daughter's computer and there is no problem - I get the Ding-Dong sounds and the menu appears.  I resorted to uploading my photos to my daughter's computer and have their email to me.  But that's getting old... for us two.

  In troubleshooting, it seems that there is nothing wrong with the USB ports, or is there something wrong with my camera or an external hard drive.  There must be something in the Windows XP program which is now off and not to recognize an external device, like the camera or external hard drive.

  Tell all about how to solve this problem?

  ===================================
  Maybe the following link offers a few ideas:

  (330135) the AutoRun or AutoPlay feature
  Does not work
  http://support.Microsoft.com/?kbid=330135

  Maybe the Microsoft Autoplay Repair Wizard
  worth to try:

  Download Microsoft
  AutoPlay Repair Wizard:
  http://tinyurl.com/STUs
  or...
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

  Good luck... John Inzer - MS - MVP - digital media experience

• I have lost my Windows XP Professionsla installation disc that came with computer and I see the message asking me to insert disk 3 to reinstall the files. What should I do?

  I lost the Windows Professional disc that came with the computer. I get a pop up requires me to insert the disc 3 of which I don't have the installation disc. Even if I try to do a system restore I need the disk. I can't lose information that is on the computer and do not have an external drive. What should I do?

  There is no disc 3 of Windows XP Professional.  Windows XP (other Media Center if I remember well) was a CD.

  Please copy the message down verbatim - including the title bar - and who post here.

  You can move this pop-up window on the side and also do all the following - in the order given anything of it periodically, you're already doing...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Cannot transfer pictures from camera to computer PTPUSB. The DLL file is damaged?

  I bought a new Canon camera but not geet the computer recognizes the camera to transfer images from the Canon on my computer.  I called Canon and they said that my PTPUSB. DLL file is damaged.  Does anyone know how I 'ONE' corrupt?  The camera works fine on a Mac laptop, so I know that's not a problem with the camera.  Please help, my Disney World photos are taken trapped in my camera.

  Try this first to make sure that the problem is not the result of the activity of malicious programs.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• Toshiba chicony Camera 2.0 receives the error message"webam driver open fail. Please restart camera or computer. »

  How can I solve this problem?

  Hello

  1. have you tried to restart the computer or camera?

  2. have you installed the drivers for the webcam successfully?

  3. What is the number of the model of the computer/webcam?

  Uninstall the web cam program and features and reinstall it back you can reinstall from the CD provided by the manufacturer or the manufacturer's Web site. Steps to uninstall the program and features:

  a. Click Start.

  b. Select Control Panel.

  c. Select programs and features.

  d. Select the Webcam program and uninstall.

  Link, you can see:Uninstall or change a program: http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program

  Hope the information is useful.

• Computer starts: problems

  I recently had a lot of trouble to make my computer with Vista at startup, it would work sometimes, other times re-launch at startup. I thought that this could be a windows problem, so I tried to re - install windows when I finally got to do the start, he did the process from the beginning until he wanted to re-start, he would have still not finished, so I opened my computer, grabbed with the RAM and BOOM, it worked fine, installation was always pointing however. I was given an option every time when I turned it to either go into Configuration or vista. I turned and walked away earlier and he went to the installation, when I came back he expanded windows for installation files, I said to myself, there is no reason to spend with it when my computer is running, so I cancelled it and now it won't start windows or let me install windows.

  Hello
   
  Follow these steps and check if your computer starts very well.
   
  Step 1:
   
  Remove all external devices and check if that helps.
   
  Restart your computer and press f8 and see it it gives revert the installation program.
   
  Step 3:
  If it does not have a configuration of the previous version, you may need to perform a custom installation.
  Reference:
  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My computer has problems detecting the USB cords.

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

  Try to buy a USB hub powered (one that plugs into your computer for its USB connection and which has also the power to the USB ports to plug into the extra wall) and see if that helps.  Some computers provide the power to the USB ports and this can cause problems with the devices.

  "Thane Marshall" wrote in the new message: * e-mail address is removed from the privacy... *

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?