can a wifi with an airport extreme network be extended with two Airport express wireless?

Similar Questions

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• Change of modem can improve the speed of Airport Express Extender?

  My router is a Airport Extreme 6th Gen.

  When Wi - Fi and close this Airport Extreme base station, I get average speeds of:

  117 Mbps down and > 11 Mbps upward

  At the opposite end of the House, I use a wireless extension: Airport Express 1 St gen - model A1264 (MB32 1LL/A)

  Here, the download speed goes up to 14mbps . 

  Download speed rest > 11 Mbps

  My ISP will not have my current cable modem: 6580 Motorola (jumpered to disable router) to provide speeds greater than 100/10 (though even I can actually slightly higher than average, I have indicate above).

  If I replaced the modem with my ISP (Time Warner Cable) provisions for 200/20Mbps (speeds I pay in fact) - and * if * I got then that 100 Mbps speed increase (wireless) when close to my Airport Extreme base station (and I think I'll) - should I then expect to see a significant speed increase at the opposite end of the House , where I rely on the Airport Express wireless extension?

  In other words, is expected to double the speed of my modem now gives me wireless (when you're on my Apple Extreme base station) also be reflected in an increase in speed at the end of the House where I must rely on the Express Extender 1 generation and where I am now only download speeds see 14Mbps?

  BTW:

  1. I can not move my extreme or my Express.  They both must stay exactly where they are. Neither can they cannot be permanently interconnected via ethernet cable.

  2. I don't think the speed reduction I describe is a bandwidth issue because I am the only one on the network and do not have multiple downloads on several devices at the same time.

  Before I ring $$$ on a modem that won't improve my speed, you will appreciate any guidance I where I need more.

  Change of modem can improve the speed of AirPort Express Extender?

  Just a little, at best. The Express pourrait spend 25-30 Mbps. No guarantee, with strangeness wireless... it is maybe the same or worse based on my experiences.

  If you need more speed at the end of the House... the AirPort Express must be located to half way between the AirPort Extreme and the end of the House. Ideally, he would have line-of-sight with AirPort Extreme.

  Yet, you say that you can not move the Express or the extreme and can't get the Ethernet cable. Have you considered or tried Powerline Ethernet adapters?

• How can I work with two icloud ID on the same pc?

  How can I work with two icloud ID on the same pc?

  Define "work".

  What exactly do you want to accomplish?

  You can use the iCloud Panel to connect to iCloud account and use a browser to go to icloud.com and sign in with another account.

• How to extend the Airport Express Wireless Network at guesthouse?

  Currently have an Airport Express (fairly new, updated). Centrally located in my house.

  I have a guest house which has a garage and a front door door aside.

  Guest House is about 56 feet from the main house.

  I can get the wifi outside, (4 bars) up to 3 feet of the guesthouse before he gets spotty or the connection is lost.

  If I go into the Guest House, I see the other neighbors networks, but not my own. (Signals strong, 4 bars).

  My question is: How can I extend the range of my network wireless in my guest house? If I need another Terminal Airport Express?

  Where would he put regarding my 1st Express?

  I would appreciate comments, thank you.

  As a first step, it may be good idea to test the different locations of the existing base station. Temporarily connect an Ethernet for inbound Internet cable. Try moving the base station to various locations. Avoid stray objects/structures (Wi - Fi and Bluetooth: potential sources of interference wireless - Apple Support).

  If necessary, an extension of the network (Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...) are possible. The best way to do it would be through an Ethernet connection to the extended base station (placed in the main, if possible). Alternatively, you can test whether a link of powerline network adapter could be used instead of an Ethernet cable to the extended base station.

• Can I use with two-step verification account recovery?

  I was reading about how you can use regain access to your account with two-factor authentication.

  Regain access to your Apple ID with two factor authentication - Apple Support account recovery

  Given that two-factor authentication is not yet available for my account, I was looking for to put in place the two-step verification.

  Any type of account recovery is available for users of two-step verification?

  Or this option is available only for users of two-factor authentication?

  Want to add more security to my account, I would like firstly to determine what are the dining options.

  From my understanding, there is not a recovery option to account for users of two-step verification.

  If someone could confirm please would be great.

  "Recovery"?  What are exactly are you afraid to lose and need to recover?  Your password?  No, two-step verification can help.  The approach is quite different from two-factor authentication:

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• What is the right way to extend a network with two stations 80211ac wireless fixed extreme apple via ethernet?

  I my house wired with ethernet and have logged as many devices via cat5e as possible. My problem is when I try to connect together the two apple airport extreme base stations and use the second to extend my network I lose the internet connection.  I am able to extend without problems via radio, but since I plugged in the House tried to take advantage of the fastest method by cable.

  Here's my network setup in a nut shell.

  In the basement, I have my router from Verizon Fios (gateway 80211n) currently configured to provide all the space an Ip address via dhcp (disabled wireless)

  Gigabit ethernet port 8 wired via gigabit switch through the cable between the bridge Fios and port 1 of the switch.

  two iMacs wired directly the fios gateway ports 2 and 3

  Base station extreme elementary apple (call it down at the moment) connected to the Fios bridge

  Extreme basestation secondary apple related to extreme primary apple base station

  Cable to switch TV

  Nintendo Wii connected to the switch U

  Apple TV connected to the switch

  Drive Blu - ray connected to the switch

  My mainly the Airport extreme is configured as follows

  connect via DHCP

  Address of the router is set to the Fios router

  FOR DNS, I used back free servers like Google, and level 3

  Wireless is set to create a wireless network

  Security is set to WPA2 Personal

  Turned on 5 GHz and 2.4 and 5 ghz are set to automatic

  Router mode is set to bridge mode off

  Second or first floor Airport extreme config

  Connect using dhcp

  Address of the router is also the Fios router

  Servers DNS is empty

  Wireless settings

  Network is set to extend a wireless network

  the wireless network name reflects my network

  wpa2 personal wireless security game

  Network

  Router mode is grayed out and pondered or bridge mode

  Second or first floor Airport extreme config...

  .. . Network is set to extend a wireless network

  Given that all routers are interconnected by Ethernet, you don't want to configure AirPort Extreme to "Extend a wireless network." This option should be used only if the connection between the wireless base stations. Instead, the two base stations must be configured to "create a wireless network.  This is because that, with them all connected by Ethernet, you have the basis for a network of mobile type.

  With this type of network, each router will broadcast their own Wi - Fi network, but because they will all use the same network name (SSID) and use the same type of wireless security and the password, all the wireless clients will see them as network «one»

• CAN frame API with two bus

  Hello

  I use a PXI-8461 to control 2 CAN bus lines.

  When I run the bus monitor to the MAX, both work correctly (frames are coming).

  But I lost a day now to try to make the two lines operate in my application.

  I call ncConfigCANNet.vi and ncOpen first with CAN0, then with CAN1.  ncOpen with CAN0 gives me an objHandle, but when I ncOpen cann with CAN1 after that, I get objHandle = 0 but no error!

  (I do not use error entries)

  So in my application CAN0 is running, CAN1 finally returns an error when I try to read using the objHandle (s is 0).

  I even tried to use the example of NEITHER "Multiples CAN Frame API maps unique DAQmx map Input.vi" with the same effect.

  Is there a known issue with this subject?

  I use

  NI-CAN 2.7.2f2

  LV 8.5.1

  PXI8461 with CAN0 and CAN1 working with the MAX busmonitor

  100g Ritter Sport chocolate / hour

  Sorry, my fault.

  I was able to solve the problem. My length of read - and write-queue was too big. I was using 100 for each queue. This works for a CAN interface, but not for 2. And, Yes, there is an error message... I lost this error somewhere in the error handling.

  Something beautiful that I used for the first time here is the network debug function for the executable files. Really cool and useful.

  Detective Conan!

• I can't synchronize with Hotmail, Outlook Express.

  original title: outlook express

  I have trouble sending and syncronize account on Hotmail. He says I need vairafiy (exuse my spelling) my user name and password. Help please!

  Try the steps listed in the link below: how to configure Outlook Express to use a Hotmail account: http://support.microsoft.com/kb/220852

  You say to someone who wants to access Hotmail with Outlook Express that they should move to Windows Live Mail? Not an exact solution.

  If you want to access your Hotmail account through Outlook Express, you can use a pop account.  See this:
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

• Can DHCP server with two scopes - I have reservations in doubles in the two staves?

  Hi all

  Not really a guru of DHCP, so be nice :)

  Currently, we run a DHCP service from one of our domain controllers (win 2008R2). The domain controller is the segment of a network (10.10.120.0/24), the computers making DHCP requests are on a separate network (10.10.103.0/22). We use our ip-helper routers setting to say the devices on the network, how to reach the DHCP server. This has worked well for years.  I should also point out it is company policy for PCs/servers have a static IP, so for the PC, we create reservations for each PC. Servers are assigned static mmanually.

  The question is now we have overflowed into a new building and put in a black 1 GB fiber that connects the two buildings. The network in the new building is using a different network (10.10.104.0/24) address. Implementation of a 2nd scope on the DHCP server for this address range went well and once the ip-to support additional parameter has been done on the router the PCs in the new building could fine DHCP to the domain controller in the main building. Everything is good.

  The question is now, we are moving PC between the two buildings, I was wondering if it is ok to keep the existing reserves for the PC in one scope and have a duplicate for her in the new scope assign the new IP address. Of course, the PC cannot be in two places at once and the DHCP console doesn't; "t seem to complain about the same MAC address used in two staves, but I don't really know whether it is advisable or not. Basically, our operations staff become a little miffed at having to remove a single scope of reservations and recreate them in the 2nd scope when the PC to move between buildings.

  So the questions is safe / advisable to do it or not?

  Kind regards

  Craig

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Can't scan with a Deskjet 3050 wireless

  PC system: MB Pro 10.7 running

  Printers: Deskjet 3050 J610 HP inkjet driver 1.3.1

  IP address: 192.168.1.45

  Problem: Deskjet 3050 wireless more prints fine however when I want to scan it just happens to expire with the beachball o ' dead just spinning and spinning.

  I tried "Reset Printing System" remove and reinstall but same situation persists...

  Thanks in advance for any help you may be able to provide.

  OK, let's reset the printing system once more, restart the printer, the Mac and the router.

  If this does not work, there is no likey a software bug.  Let me know how it goes.

• With two routers wrt320n wireless bridge

  Dear reader,

  I want to bridge two routers too extend my network onbuildings on my compound. I I drew of how it should be. 'Bedrade' means 'wired', "Brug" means "bridge" and "draadloos" means "wireless" its all Dutch.

  Thankgs in advance

  

  Regarding accurate features 3rd party firmware that we need to ask in the forums of 3rd party firmware. I think that dd - wrt and tomato two add configuration options to configure a WRT as wireless bridge. You would operate a WRT in the normal way (i.e. you don't need 3rd party firmware on that one) and the other as the bridge that connects to the first.

• WiFi problem with iPad 4 on first generation Airport Express

  Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

  As a test, temporarily change the wireless network name and password on the AirPort Express.

  Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

  Can the iPad4 connect that way?

• Airport Express works with iPod Hifi?

  I have iPod Hifi and I would like to buy Airport Express to make them wireless and play the songs of Mac and iPhone. Would this work? What else do I need? Also the wifi extending functionality would work fine too?

  Thank you for your time.

  The iPod Hi-Fi is not a loan AirPlay device. However, it has a 3.5 mm analog/digital audio input port that can be connected to an AirPort Express Terminal for reading iTunes stream from either the Mac or iPhone.

  Note: Both the Express and the iPod Hi-Fi built in DAC to convert to digital-to-analog audio sources.

  With respect to the extension of Wifi, the wireless router to be extended with the Express should be another Apple product: Express Extreme and Time Capsule.

• I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

  Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

  Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

  Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

  SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

  Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

  Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.