Can an administrator view user login history?

Similar Questions

• I was able to do DBUM can recon trust without user login mapping

  Hi all
  
  
  Is it possible to do dbum approved reocon without mapping field User Login? , Because it's going to create automatically using the handler to process mail.
  
  I am able to recon when I map userlogin otherwise not. But my need is userlogin shud create automatically. How can I achieve this
  
  
  Any suggestions?
  
  
  Kind regards
  
  user7609

  This approach will work very well with first recon time (new user) and you do not need to do anything extra.
  But, the problem occurs in the case of update (next time the same user recon). As the userlogin is mapped with the source to the target and you changed using the process post event handler. Thus, the same record, it will consider also editable and it will again try to update the connection of the current user. Yes, you can call your handler on update as well. While it will update again to the previous. It will be worst approach. beacause, it will treat the same record always.

  Again, I suggest. Better go for the transformation. which will serve your purpose. In this case you need not map the connection of the user to the source of confidence. transformation class will generate the user login during the prior insertion.

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• Game to "Save history" for 30 days, can only view last 7 days - how can I view the longer history of 7 days?

  "Save history" set to 30 days but can only view last 7 days of history - how can I view the longer history of 7 days?

  According to your troubleshooting info, you have 2 set preferences to update the:
  Browser.history_expire_days
  7

  Browser.history_expire_days. Mirror
  7

  In the address bar, type Subject: config and press ENTER. The subject: config "This might void your warranty!" warning page may appear. Click on that I'll be careful, I promise! to continue on the subject: config page.
  Search for the preference browser.history_expire_days. Right-click on it and select reset. Do the same for other preferences.

• Can't access administrator account, "user profile Service service has no logon.

  I can not access my user account who is the administrator account. An another user account on the computer (standard account) is still available, however. (Which doesn't have a password). I use Windows 7 Home Premium (64 bit?).

  I get the following error message after entering my password:

  "The service user profile Service has no logon.

  User profile cannot be loaded. »

  (Note: the word "service" is repeated in the error message.)

  I have not deleted all the files manually, or altered by the profile and have not installed all the software until the problem occurred, but I'm running anti-virus software (as always).

  I tried to turn the computer power and repeated logon several times in the last 12 hours, but with the same result.

  My profile is damaged? Is it possible to access my user account without implementing the user profile?

  I used this Microsoft Support page using the method 1 http://support.microsoft.com/kb/947215/en-us

  It worked perfectly, & took only 10 minutes to complete. You must have an administrator account substitute, you can go to access these folders.

  Good luck!

• When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  Hi Barry,.

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  What browser you use on the computer?

  If you are using Internet explorer, I suggest you to follow these steps to turn on the AutoComplete feature and check if it helps:

  (a) open Internet Explorer.

  (b) click on the Tools button and then click on Internet Options.

  (c) click on the content tab.

  (d) under AutoComplete , click settings.

  (e) check the address bar, Forms, usernames and passwords on formsand ask me before saving passwords check boxes.

  (f) click OKand then click OK again.

  Let us know if this can help, and if you need further assistance.

• Change the command prompt based on the user login

  Hello
  
  I work in 11.1.1.5(11g) OBIEE. In my environment, OBIEE is integrated with OAM and user gets if authenticate in the OID Database.I a requirement where in cases that we have two users(user1,user2) and guest (prompt1, 2 guest)
  
  Example:
  If 1 1 user login prompt should get the display and 2 2 so quick connection of the user should get a good view.
  
  Can anyone help on this?
  
  Thank you
  Padmini

  With the help of the Administration-> catalog manage set permissions at the prompt and add the page. Based on the permissions that they might see respective guests

  If brand aid

• How can I block the users access to microsoft office?

  How can I block the users access to microsoft office?

  You must set "" permission to run on each of the Microsoft Office programs (word.exe, excel.exe, powerpnt.exe, etc.) such that the group 'Administrators' and the SYSTEM is allowed to run.  To do this, you do a right click on the .exe file, select 'Properties', then click on the 'Security' tab and change security as you wish.

  If you do not have a 'Security' tab, then it is because you have XP Home Edition, or if you have XP Pro with active Simple file sharing.  For XP Home, you must boot mode safe (repeatedly tap F8 at startup key) and login as an administrator to access this tab.  For XP Pro, follow the instructions in the following article:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  HTH,
  JW

• Preparation of desktop + default user login

  Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get a new office and default user privileges 'B '. No files or other inerference profile to the default user 'B' will appear. To fix this, I restart or shutdown. Then start up, usually, I welcome and one for the default user login screen. After login, I have all the stuff for the user 'B '. It happens randomly without error message to the previous closure or the new connection. Any ideas?

  Hi BobThurmond,

  Method 1: First of all, you should try to check and safe mode if the problem persists.
   
  Follow this link provided below to start your computer in safe mode.
   
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2: If the problem does not happen, I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  In addition, You can also use Event Viewer to search for information on the problem.

  Here is an article on how to do it:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can see for more information on the issue at the time where it occurred.

  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

  Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

  Thank you

  el_abuelo

  Hello El_Abuelo,

  I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

  If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

  Thank you for making the point about your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Corrupted user login

  Corrupted user login

  Hello everyone

  I've been looking and after a few tutorials on this problem, but no work, so wrong here let my questions.

  My computer has 2 users, 1 with admin Preobrajensky and another with no Preobrajensky, last week when I start the pc, it shows both users, but the admin account has no name or image, if I choose what it it shows the name and password empty, if I write downs he said tha the user, or the password is wrong , so basically im stuck with an account with no Preobrajensky.

  I discovered that my admin account is corrupted.

  So I follow some tutorials on how to solve this problem.

  The way I found is to activate the real built in Administrator account and then access this account the regedit and difficulty the other account.

  The problem is, as im stuck with an account with no Preobrajensky and start in safe mode doesn't give me access to this account with no Preobrajensky, I used a dvd a kick with her windows, open a command line and type net user administrator / Active: Yes, it shows a sucessful message but when I restart the pc and I start in safe mode I don't see another account to connect , these 2 accounts, so I chose the one with no picture and I have type administrator it displays a message saying that the account is not activated.

  So im stuck at this point, because I really can not format this pc now and a restore point I would probably lose a few files I need, any ideas why I can't activate the built in admin account? Or I do something wrong?

  So I have tried a few things and came up with a solution to do this, basically connecting the command net user administrator/active: Yes and a recovery that DVD did not work, I still didn't see built in admin account, then I looked at the login screen and I saw the small button in the lower left corner of the screen, and this button starts the utilman.exe.

  So I thought I could use the same procedure to replace the files from the command line with dvd to replace the by the cmd.exe utilman.exe.
  I tried in the login screen, it is a command line, here I did net user administrator/active: Yes and then I selected the user corrupted, the administrator typed and the boom! IM in.
  Made a few changes and account working again :)
  Note that, in the line net user administrator/active: Yes the underlined word, is written for the Portuguese version of windows, so if you have an English version change administrator or in any other way if your system's main language is different.

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• PHP User Login DW &amp; quot; User authentication &amp; quot;

  Hello!
  
  I use CEP user behavior of authentication server for a dial-up connection to 6 pages. I use a PHP page and I set up MySQL database and are working properly. I even put in place of access levels if only certain users can see some pages.
  
  However, what I can't understand is how to direct users to a specific page. The behavior of user login allows you to choose a successful login page. I want the user to be directed to a page designated for that user. (there are only four users - using user group connection names - 1 login and pw by group)
  
  How can I do? Y at - it a variable type, I can use for the $MM_redirectLoginSuccess = "choir.php"; command?
  
  1 million thanks!

  Hello-

  The best thing I found is to send all users to a single page.
  example: www.example.com/secure/index.php. Once they are directed towards the
  page - you can then generate the content on this page that
  It is the user.

  Using the Dreamweaver server behaviors (for example, Log In user, restrict access
  to Page) - on the page (secure/index.php) - put this piece of code after the
  the code generated by Dreamweaver (restrict access to the Page):

  <>
  session_start();
  $authorized = array ();
  $authorized [] = "Admin";
  $authorized [] = "user";

  {if (! in_array($_SESSION['MM_Username'],$Authorized))}
  Header ('Location: http://www.example.com/login.php');
  "exit";
  }
  ?>

  That validates that the user is "Admin" or "User", and if they are
  No - it redirects to the login page. Then, to generate the content
  in view of the user, you can either hardcode it directly into the
  /Secure/index.php page, as follows:

  <>
  If ($_SESSION ['MM_Username'] == 'Admin') {$var = 1 ;}
  ElseIf ($_SESSION ['MM_Username'] == 'User') {$var = 2 ;}
  {Switch ($var)}
  case 1:
  ?>

  All content "Admin" goes here

  <>
  break;
  case 2:
  ?>

  All 'User' content goes here

  <>
  break;
  }
  ?>

  All the information here will be visible to users

  The other option you have is to use the same configuration except instead of typing
  in all the code of the content (for example,

  ...

  ) - you can remove from your
  MySQL database.

  If you want more details, David and Gary are here, too. ;)

  HTH, take care.

  --
  Shane H
  [email protected]
  http://www.avenuedesigners.com

  =============================================
  GAWDS proud member
  http://www.GAWDS.org/showmember.php?MemberId=1495

  Delivering Web sites accessible to all...
  =============================================

  "bradmphipps" wrote in message
  News:e9mqok$JSE$1@forums. Macromedia.com...
  > Hello!
  >
  > I use DWs user behavior of authentication server for a dial-up connection to 6
  > pages. I use a PHP page and I have the database MySQL, put in place and
  > work
  > properly. I even put access levels if only certain user can see
  > some pages.
  >
  > What I can't understand, however, is to know how to run that some users a
  > specific
  > page. The behavior of user login allows you to choose a successful login page. I have
  > want to
  > the user to be directed to a page designated for that user. (there are only
  > four
  (> users - using user group connection - 1 login and pw by group names)
  >
  > How can I do? Y at - it a variable type, for I can use for the
  > $MM_redirectLoginSuccess = "choir.php"; command?
  >
  > 1 million thanks!
  >

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)

• Pavilion p7-1235: failed to get comp boot - Windows startup, but no HP user login page

  Please read this:

  I was on Google image search and typed in a key phrase to find images.  I decided to change the sentence by moving words.  Highlighted the first two words and I wanted to drag until the end of the sentence.  When I tried, I got a message saying enter now image and image search.  It was weird.  Never seen that before.  I wasn't looking for a real image using a picture, I was just looking for pictures of architecual using key phrases.  So, I hit ESC to clear the highlight and tried typing in the search box, but it wouldn't take any changes.  I closed my browser and moved.  Started a video and the video was stuttering as he played.  Tried again and it's the same thing.  Decided he must be still stuck on the image search so I closed everything, ran a quick system if the scan and then let it stop automatically at the end of the analysis.

  A few minutes later I came back to the computer and started it.  He went to the blue screen of the HP with the hand and the flight of image files. Below it read "Press esc for boot menu."  From there, he went to a black screen and the following messages:

  Check cable connections!

  &

  Error: No boot disk was detected or the drive failed.

  I tried a few different options then found my USB stick recovery I did the day I bought the computer.  That put according to the explanations provided here in the support forums.  This time, on the next startup attempt, he showed the foreclosure "loading files" and then goes to "start windows" - it appeared that everything was fine, but it wasn't. The color Windows icons do their thing and below, he reads from windows... And then nothing.  It just sits there with the Microsoft image on the screen.  Then, this password start windows on the blue HP screen screen... Then it stops on its own and restarts the same exact process: "loading files" > starting windows > blue screen HP > restarts... Repeats.  Sometimes to where it should be, but then it looks like it not connect further.  No of HP user login screen.

  In addition, I was never able to get the HP Recovery Manager window appears.  In fact, no HP can't at all (with the exception of blue screens such as mentioned previously).  In the past, once, when I had an error in startup (for more than one year), F11 brought by the HP Recovery Manager and I could simply restart the computer from a previous restore point... In this case, he never came to the top.  I'm not a tech guy but it feels like the side system HP isn't here.

  Any help would be greatly appreciated... I'm dead in the water at the moment...

  You can try to plug the data cable into a different SATA connector on your motherboard to rule out a problem with the connector itself.

  You can test your hard drive:

  Screening of hardware failures

  If your hard drive is mechanically dead then your data it lost unless you already have saved or pay an expensive data recovery service.

  If only the operating system or a file on the disk is damaged, then you probably can data recovery by plugging the hard drive to another pc as a player sencondary to access the files.

  You can recover your system on a drive hard new with your recovery disk USB by following the instructions here. See the section: boot from USB Recovery Drive

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!