CAN dashboard reports are from the user connections filterd

Similar Questions

• How can I remove comments from the users and groups

  I have my in my users and groups in the system preferences a user snd invited another user

  How can I remove them

  Go to Preferences system-> users and groups, and then press the lock to allow you to change the settings. Then choose 'user comments' in the sidebar and uncheck "Allow clients to connect to this computer". This will not make this option disappear, but after that you will not be able to use the Guest user.

  «Respect for the other user, simply choose it in the sidebar and press on the '-' button.» Make sure that no one uses this user.

• Using Windows XP with an access switched. How can I stop the network Dialer to invite the user connect even if I checked never dial a connection in Control Panel, then apply, then OK?

  Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?

  Hi Richard,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Network connections and remote access troubleshooting

  Hope the helps of information.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How can I move all my files from the user from one user to another on my pc?

  original title: moving files

  How can I move all my files from the user from one user to another on my pc?

  Log an administrator account. Open your folder 'user '. Select all the files, copy them, and paste them into the other folder 'user '.

• How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  [Profanity removed... MOD]

  Hello

  I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.

• SERVERERROR trigger fires from the user of the SYSTEM

  We use the Oracle 10 g on Linux platform. The following trigger is created for the mistakes of trace:
  

  CREATE OR REPLACE TRIGGER test.error_log
     AFTER SERVERERROR ON test.SCHEMA
  DECLARE
     v_errnum    NUMBER;
     v_counter   NUMBER := 1;
     v_errmsg    VARCHAR2(1000); -- stack counter
     v_errnumparam  NUMBER;
     v_errparam  VARCHAR2(1000);
  BEGIN
     LOOP
        -- get the error number off the stack
        v_errnum := server_error (v_counter);
  
        -- get the error number off the stack
        v_errmsg := server_error_msg (v_counter);
        -- if the error number is zero then exit.
        v_errnumparam := server_error_num_params(v_counter);
        v_errparam := server_error_param(v_counter, v_errnumparam);
  
        EXIT WHEN v_errnum = 0;
        -- commit is required because we are in an
        -- autonomous transaction
        INSERT INTO error_audit(SID, ORA_NUMBER, DESCRIPTION, STATUS, CREATED_BY_USER, CREATED_ON_DATE, MODIFIED_BY_USER, MODIFIED_ON_DATE)
             VALUES (sys_context('USERENV','SID'),v_errnum, TRANSLATE(v_errmsg||';'||v_errnumparam||';'||v_errparam, 'x'||CHR(10)||CHR(13), 'x'), 'Y', USER, SYSDATE, USER, SYSDATE);
  
        -- increment the counter and try again
        v_counter := v_counter + 1;
     END LOOP;
  END;

  The problem is that when to connect us from an outline of the TEST, the following select statement error logs in the audit table. However, the following statement executed from the user of the SYSTEM does not record the error. Can any body guide me to fix this error?
  

  ALTER SESSION SET CURRENT_SCHEMA = test;
  select * from error_audi
                *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  Why is it? Trigger when the current user is TESTING and not someone else. ALTER SYSTEM SET CURRENT_SCHEMA does not change the current user.

  SY.

• I can't download apps from the App Store.

  Hello, I can not download apps from the App Store.

  So here's the problem: I use an iphone 6s and I tried to download an app, but there was a notification in the App Store that said that my icloud storage is full, so I deleted ALL the data backup, and he says that there is 4.8 GB free on 5, so I tried to download the application again , but the application remains in the WAITING mode and I can not update an app that I wanted, I tried these methods, but they troubleshooting didn't work:

  1 to pause and continue the download process.

  2. hold home and the market/sleep button for 10-15 seconds and let go.

  3 retarting my phone.

  4. compensation for storage.

  5. signature of my icloud account, then restart my phone, to connect it to my account again.

  6. long pressing the application of waiting to make an "X" appears in the upper left corner.

  7. making sure that there are no other applications which are being downloaded.

  No registration get downloaded on your iCloud account. They are downloaded to your iPhone.

  If you saw a message saying that you are out of free storage space, it's on your device, not in iCloud.

  Settings > general > storage & use iCloud > press on managing storage in the storage section above.

• The user connection speed

  Hello

  I have AROUND 1252 connected to WISN, active 802.11n in the network,

  Broadcast SSID HR and ADMIN 2
  HR without authentication and unsecured... ADMIN with active WEP,

  When the user connect to HR SSID, it must be connected to a speed 72Mbps,
  but the problem is when the user connects to ADMIN SSID, the user must be connected to 54Mbps always,

  can someone tell me the reason for the same thing.

  Hi Kiran,

  802.11 N speeds has certain criteria... they are...

  The WIFI network should be...

  1 > auth with no security and encryption + all MCS rates enabled + WMM enabled.

  2 > 2 WPA - AES encryption + all rates active MCS + WMM active.

  Since your second WLAN uses WEP, speeds N shouldn't!

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• I can't download apps from the store

  I can't download apps from the store and when I try it display microsoft service unavailable and my connection does not work correctly

  Hello

  We recommend that you try the following troubleshooting steps:

  Method 1: Try to disable the proxy connection (if you are using a connection through proxy)

  Follow these steps to disable the proxy:

  a. click on the gear icon in the upper right of Internet Explorer and then click on Internet Options.
  b. click on the connections tab, then click LAN settings.
  c. uncheck use a proxy server for your LAN , and then click OK.

  Method 2: Run the troubleshooter of App

  Refer to this link: solving the problems of the App.

  Method 3: Reset Store Cache

  has. press the Windows logo key + R to the start screen.
  b. type wsreset.exe in the immediate window and press enter.

  Method 4: Temporarily disable the antivirus program

  Important: Antivirus software can help protect your computer against viruses and other security threats.
  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, refer to this link: https://support.microsoft.com/en-us/help/13765/windows-store-why-cant-find-install-app.

  Let us know how it goes.

  Kind regards

• Hi, I can't download photos from the camera, error 1201, any idea what is - this?

  Hi, I can't download photos from the camera, error 1201, any idea what is - this?

  A common problem on a MAC, less frequent on Windows based on my reading of the reports here in this forum

  You don't have WRITE permission in the folder where Lightroom is trying to copy the photos to (this file is put in the import dialog box in the Destination panel), so change your permissions.

  For future reference, the 201 is not the error code and no use for us here, it's the number of photos that are affected by this error. In the future, just give the complete error message.

• You can use functions defined by the user in orardf: statement?

  Hello, reading Chapter 5: refined for RDF data access control
  I found this example:
  
  OPTIONAL
  {
  ? control pred: hasContractValue? Val.
  ? control pred: hasManager * ' sys_context ("his $ appctx ', 'app_user_uri') ' ^^ orardf: instruction *.
  }
  
  See the orardf type: statement, I got the question if you can use functions defined by the user in the place where he has used the sys_context?
  
  Thank you.
  
  PD: The translation was made from Spanish to English by using Google Translator

  Hello Alberto,.

  Only the sys_context function is supported. The user-defined functions are not supported.

  Thank you
  Matt

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Can we open document from the hyperlink QML?

  Can we open document from the hyperlink qml?

  Label

  {

  "text:"Click here!

  "

  }

  I know that this problem has been resolved, but won't this is the solution.

  People, please stop using onTouch event on controls to manage the events of tap.

  To manage the tap, you must use gestureHandlers instead of onTouch

  gestureHandlers: [
                  TapHandler {
                      onTapped: {
                          // THIS CONTROL IS TAPPED AND NOT SIMPLY "TOUCHED". DO SOMETHING HERE
                      }
                  }
              ]
  

  If you treat your event on signal Notecard, you will eventually provide a poor user experience!