Can HP Solution Center - I change to work with HP Photosmart 6525 instead of C310 mind

Similar Questions

• B110 series printer: HP Solution Center suddenly does not work

  The HP Solution Center has suddenly stopped working.  The notice says that he cannot work because the device is not over...  It was not a problem in the past (and I'm on Windows 10 months) and I don't have no problem with printing a document, but can not scan - from the solution center or the printer to the PC.  I have uninstalled and installed the drivers twice and also removed a recent update of security Microsoft as advised in a single site, but nothing helped.  The printer is a B110 series and I am on Windows 10.

  Welcome to the Forums of HP @HV2, I'd be happy to help you get your Solution Center works again. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When address us the issue, I would you kindly mark the appropriate post as accept as Solution so that others have the same or similar problem can find what worked for you.

  Even if you have already uninstalled and reinstalled the software, I suggest you to perform an uninstall, but with a different approach. Please use the following steps to perform a complete uninstall:

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_WW_140_408 - 5.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the Util folder
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP , run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec / unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

  * Note: there is a space between the c and the /.

  If you do not at this stage, use this link to perform another way. Restart Windows install

  1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
  2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
  3. Restart the computer
  4. Download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  If you cannot complete any of these steps, please stop and after back to let me know where got stuck you. Skip a step and continue to the next step won't do what it takes. If you get stuck, I'll help you through it.

  I look forward to hearing back from you with the results of your efforts. Thank you.

• How to change or work with a .sket in Illustrator?

  How to change or work with a .sket in Illustrator? Can't select the object exported from the sketch. Thank you.

  Answer: You cannot directly use the .sket file.  You can send a JPG of the working version to everyone through stock supported options.

  Pseudo response (fast): If you want to work with vector paths in the project of the sketch (.sket) you will need a subscription Adobe CC ~.

  1. go in the specific figure that you want to send (click it like to change it in the application);

  2. send (Share) to Illustrator CC from the mobile application.  (to the same CC account you're connected to your iPad with);

  3. in Illustrator CC, choose from the options OBJECT toolbar > LINE & SKETCH ART > EXPAND to PATHS

  NOTE: This does not apply to the work of the brush.  It converts your work simple and features traces, change your work to something that does not resemble the project of .sket.  Fortunately, it does not save the file .sket of origin.

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• Sony CCD-TRV608 camcorder. can not find drivers for it to work with Windows 7.

  I have a Sony CCD-TRV608 camcorder and can not find drivers for it to work with Windows 7.  I've been on the Sony website and they do not have something there that I can find... most of the options you can choose to say there is nothing available after you select them.   Problem #2 - I do not know what kind of cable I need to connect the camcorder to the computer.  Any ideas?  Thank you very much!

  Hello JacquieXU,

  You will need a USB cable to connect the camcorder to the computer. You can directly connect the USB cable which you would have received with the camcorder and would appear as a plug-and-play device. If you have the software Camcorder installed on the computer, it will directly load the default drivers when you connect the camcorder.

  If the USB generic drivers are unable to load when you connect the camera, check if the camcorder is compatible with Windows 7.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• I can't get any external microphone to work with my windows 7 in my computer HP

  I can't get any external microphone to work with windows 7 on my HP computer. I tried a USB and microphones jack 8 mm. what else can I try?

  Update your Windows and run this tool:

  http://support.Microsoft.com/mats/AudioRecording/

  If the problem persists, contact HP support.

• How can I get my scanjet 4400c to work with windows 7

  How can I get my scanjet 4400c to work with windows 7?

  Site HP says that it is not in the United Kingdom!

  Hello

  Sorry to say no luck, no more support from HP and Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&UID=C9870A&pf=0

  Kind regards.

• I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  There is no download available for version 3 I know - version 9 is the most ancient available offered by Adobe.  Serial numbers are valid only for the version that they were purchased for.

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• where can I download Solution Center hp for hp psc1110 with win7 32-bit driver

  HP all in one single PSC1110

  Windows 7 32 bit

  Hewlett Packardpsc 1100 failed

  Hello

  No work around using an another model nt software will be applicable for her...

  In order, the HP Solution Center will detect your device, the device must be configured by a installing the HP software, which does not exist for your model.

• Solution Center suddenly does not work

  I have an OMNI 220 all in one and a printer D110a Touchsmart.  I've used several times solutions Center to scan documents.  Suddenly when I try to open the Solution Center it tells me that my device installation is not complete.  I have reloaded the printer driver and restart the computer.  He still thinks that the device is not complete.  The printer print without problem thanks to our wireless network.   It seems that the problem must be Solution Center.  How to troubleshoot and fix this?

  If your operating system is Windows 7 or Windows 8, the possible quicker fix is to use the system restore. Choose a restore point dated before that the problem arose.

  If Windows 8 operating system and then creating a custom refresh image is the best way, especially if you store your external data to your PC.

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• HP deskjet 2130 all in a ser: can hp office jet 2130 in one work with windows 10

  can this printer also works with windows 10 or not

  Khan-1234

  Hello;
  
  Let me welcome you on the HP forums!
  
  To answer your question - YES - but you must use the HP software and drivers, not one provided by Microsoft.

  Here are the drivers and software for this printer page: http://support.hp.com/us-en/drivers/selfservice/HP-DeskJet-2130-All-in-One-Printer-series/7174550/model/7174551

  You must download and install full feature software and drivers for the printer.

  Then unplug the printer and install the software.

  Do reconnect the printer until the installation program invited to do so.

  Once the installation is complete, restart.

  You should then be able to use your printer in Win10.

  Good luck

• How can I configure the keys easy to work with iTunes on Satellite P300-150?

  I have a Satellite P300-150. The easy (the illuminated keys above the keyboard) keys work fine when iTunes is in the foreground, but I want them to work when I minimized iTunes or switch to another window. I found the "TOSHIBA button Support" utility help within TOSHIBA, but it only allows me to set it up as the "Enlightenment" and "CD/DVD" [drive] (the two left most) easy keys make...

  Any ideas please?

  Thank you.

  I doubt that this is possible
  I m using the WinAmp instead of Windows Media Player and the CD/DVD button works with Winamp. I want to say I can run Winamp by pressing this button, but I can't use the game, break, buttons forward in WinAmp.
  I think that it is not possible also with ITunes I've never tested, but it seems that it s not configurable.

  See you soon

• I can't get my new scanner to work with Equium A60

  I can't get my new scanner (canoscan lide 70) to work with my a60. Is it because the usb ports are all hubs?

  Hello

  > it because the USB ports are all hubs
  Sorry, but this suggestion to me confused.

  I m also owner of a scanner and it s a simplest thing to connect and install it!

  I put t see any problems using the scanner.
  All devices should be delivered with the own installation CD and I guess that your scanner also comes with additional supports.
  This CD contains the description of the installation and the necessary drivers.