Can I use a camera HDMI input to capture first?

Similar Questions

• BlackBerry Smartphones can not use my camera :(

  How can I use my camera to bb. It displays a message that 'impossible to DΘmarrer the camera. close other applications and try opening the camera again. "How? I don't know what application to close.

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• I can't use the full version of photoshop and first

  I can't use the full version of photoshop and first even if my bank account is in charge for the latter. All I get is an option for a free trial and on my adobe says creative cloud free acount and it does not even say I bought these two even if I ambeing responsible for them. Why this suddenly changed because I buy and now I can't use them.

  You will need to speak to a representative of Adobe by Chat or phone. We cannot discuss issues of license and the serial number on a public forum. Call for the United States opening hours:

  Contact the customer service

  Click on the blue link.

• How can I use my camera and flash drive when I am told is not accessible?

  I tried to use the camera on my lenovo computer and a flash drive. When I Plug one... It tells me no access or is not accessible. When I got to load or transfer I had no right... After having click on everything I could... Then, I have used both... Unfortunately when I went to use it again after some time out, I was denied access. Sheherazade... Can anyone simply strolling through the fix?

  You say after clicking on everything but don't list all things accurate you linked.

  You must specify how you have tried to access these devices and keep them separately so that they are not intertwined or confused.

  The cameras are usually accessible by using import in a program photo editing that you have installed?

  Also the will of card sd removing also make this device listed as a flash drive.

  Flash drive are accessible and listed as a removable drive / mass storage designs,.

  Click the Start button and click computer.

  Flash drives also appear on the Navigation pane in your libraries from win-7 beneath the computer section near the bottom with a drive letter assigned to it.

• Can I use the mini HDMI port to safely load my HX200V?

  I used the mini HDMI port to load my camera HX200V battery,

  but the battery does not very long load, even after being recharged.

  I have hurt the battery?

  Hi RickS8082,

• BlackBerry Z10 camera in use, can't use the camera

  I have 4 programs that use the camera and now nothing works as it says that the device is used with another program.  I've deleted all the programs, but still couldn't use my camera phone.  I have given all the programs I deleted and still no change.  Any thoughts?

  Programs that use the camera are Panorama 360, waze, flashlight and Skype.  I kept offshore for contact problems associated with Skype Skype

  jefferyh wrote:

  I have 4 programs that use the camera and now nothing works as it says that the device is used with another program.  I've deleted all the programs, but still couldn't use my camera phone.  I have given all the programs I deleted and still no change.  Any thoughts?

  Programs that use the camera are Panorama 360, waze, flashlight and Skype.  I kept offshore for contact problems associated with Skype Skype

  What operating system do you use? Have you tried to re - start the phone after removing the above programs?

• Can not use the camera view

  Whenever I go to the view active camera and do turn to look around, AE is just a sound of "ding" and won't let me use the camera tool to move the view.

  I know that this must be because I have something selected, but I tried to deselect everything, to add items, etc.

  You must have a camera and 3D layers. Add a camera and at least one of your layers 3D and you will be able to move.

• Function DAQmxRegisterEveryNSamplesEvent can be used for the counter input channels

  Hi all

  I have a request to count the number of digital pulses. I want to know the time of impulses coming which start from 1 and an increase in later, 4 as 1, 5, 9, 13... The time interval between each pulse is not a fixed value. So I tried to use DAQmxRegisterEveryNSamplesEvent and DAQmxCreateCICountEdgesChan functions. But afterI calls the DAQmxStartTask function, it has always failed.  The advice that I used is the NOR-PCIe-6320. Here's the part of my code.

  DAQmxErrChk (DAQmxCreateTask("",&m_taskhandle));
  DAQmxErrChk (DAQmxCreateCICountEdgesChan (m_taskhandle, "Dev1/ctr0", "", DAQmx_Val_Rising, 0, DAQmx_Val_CountUp "));
  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (m_taskhandle, DAQmx_Val_Acquired_Into_Buffer, 4, 0, EveryNSamplesCallback, this));
  DAQmxErrChk (DAQmxStartTask (m_taskhandle));

  I don't know the reason. Can someone give me help. Thank you.

  Yang

  DAQmxRegisterEveryNSamplesEvent only works with the buffered in memory tasks.  That's what you should do anyway (if you want to use the callback or not):

  1. make your external signal the sample clock (DAQmxCfgSampClkTiming).

  2. use one of the basics of internal time as the source (DAQmxSetCICountEdgesTerm).

  Each sample you read will give the count in ticks of the time base.  Multiply the number by the base of your time period and you now have a timestamp.  Keep in mind the counter roll to 2 ^ 32 therefore account for this in your program.

  The recall is not necessary, but it is useful that you can make sure that you block your main thread until the samples are available.

  Best regards

• HP Envy Phoenix 860-010: How can I use a third monitor HP Envy Phoenix 860-010

  I was happily running two monitors since I got this computer in April 2016, a monitor connected to the HDMI port and the other to the NVIDIA GTX 960 card DVI port.  This card supports four maximum monitors.  It has 1 DVI, 1 HDMI and 3 DisplayPort connections.

  Note on the model 860-010, you can't use both ports HDMI vertical marked HDMI 1 and HDMI 2.  They are not active in this model.  They only work with the smaller models that use the integrated graphics card.  This model has the dedicated graphics card, then only the ports on the card are active.  (That does not match the Support of HP and I confirmed by experience).

  Now, I need to connect a third monitor that has VGA and DVI ports.  My only option is to connect it to one of the DisplayPort ports on the map with an adapter.  I contacted the support NVIDIA and they told me that is a * active * or * passive adapter works with this card.

  So I bought a DVI DisplayPort passive adapter cable / and connected the third monitor to one of the DisplayPorts.

  When I start, the start screen appears on my screen of third but it signals an error specified, says it cannot start Windows, and proposes to recover my system back to a restore point, which I of course refuses.  I tried various advanced troubleshooting options, two different ports, DisplayPort and two different DVI monitors with the same results each time.  When I disconnect the third screen, the computer is back to normal and starts very well.

  My third monitor is obviously able to display stuff through this link because the splash screen and the different screens of the error and recovery see here, and I can use my mouse to interact with these screens.

  The screen message error file C:\windows\System32\Logfiles\Srt\SrtTrail.txt newspaper references.  This file reports the following error:

  Root cause found:
  ---------------------------
  Unknown error checking: bugcheck 3B. settings = 0xc0000005, 0xfffff80181a107b3, 0xffffd000cc9f60b0, 0 x 0.

  I tried to look this error online and got no useful success.

  Someone knows how to do a third DVI (or HDMI) to monitor work on this model?

  Confirmed that my problem was a bad DisplayPort passive adapter DVI cable.

  I got the third monitor working by getting a Plugable Active adapter DisplayPort to HDMI for $19.95 and one of my existing monitors to use its DVI port to HDMI switching use.  Then I connected the third monitor, which has DVI and VGA connections on my computer with a DVI cable.

  Now, all three monitors are working fine.

• Can I use my HDR-PJ440 in Skype, or as a webcam?

  Hi all

  I scoured the internet for support on how to use my hdr-pj440 for Skype and a webcam. I do this for the schooling and to communicate with my family, and to the extent that I failed to get the right answer. I hope that the community can help with this?

  Hi Saber_machina,

  Welcome to the community of Sony!

  The HDRPJ440 cannot be used as a webcam or used with Skype. You can only use the camera for live stream your videos through UStream. Broadcasting live information accessible through this link.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Can I use to connect to the monitor external hdmi

  Can I use the HDMI port to connect to an external monitor while shooting video with my EOS 7 d? In addition, this monitor can be a 1920 X 1080 HD monitor? I would need to get a mini HDMI cable DVI, but want to make sure, that it would not harm the camera before trying.

  Thanks in advance!

  Hello HowardLane,

  Yes, you would certainly be able to use the EOS 7 d HDMI output to connect to an external monitor.  While a studio monitor is usually used because of their qualities of accuracy and calibration of color, any monitor with a HDMI terminal input would work.  This will not harm the camera.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• The dsc-w710 camera can be used as a webcam

  The w710 dsc can be shown directly on a computer for the photo or video capture screen?

  Hi Paul-C! I understand that you want to use the DSC-W710 camera as a webcam. Unfortunately, this camera model has not a USB streaming feature. Once the device is connected to a computer via USB, it goes into data transfer mode and will not be able to save pictures or videos.

  It may be possible to view a "live view" of what the camera is the view using audio/video connection. However, the computer may need to other components of an audio/video input, video capture card and software for recording. This may be an alternative, but still not guaranteed.

  If my post answered your question, please mark it as "accept as a Solution.

• I have three questions: 1) what can I play the shuffle through my car stereo system? (2) can I download music on Amazon? (3) can I use the a/c plug that came with my Kindle to load form a socket a/c?

  (1) can I play my shuffle through my ca stereo?

  (2) can I download music on Amazon?

  (3) can I use the a/c plug that came with my Kindle to charge the shuffle of a socket a/c?

  (1) you will need to check the documentation for the stereo system in your car for devices supported, to ensure compatibility with the USB port on the car stereo system.  If the car has a "taken auxiliary input" (a mini jack stereo - looks like the headphone jack), you can connect the shuffle (or any device) it and 'play' the shuffle.

  (2) music from Amazon is in regular MP3 format.  MP3 work with iTunes; You can add MP3 files to iTunes from any source.  Once in iTunes, you can synchronize files MP3 song for the shuffle, in the same way as a song on iTunes Store AAC files.  There is no difference.  NOTE: Amazon has a Mac app to add songs purchased directly in the iTunes library.

  (3) may, if it provides sufficient power, and it has a standard USB port on this subject.  We recommend that you use USB port on the computer or an Apple power adapter.