Can not connect my Satellite L30 home WLAN

Similar Questions

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• Suddenly, I can not connect to printer on home network wireless.

  I have a Pro L7680 Officjet and we have a new installation of cable company in our House. We have 2 laptops and 1 desktop. All three share this printer and we had no problem. Since the installation, 1 laptop connects to the printer. Support cable co. was not able or willing to help, saying: it's not their fault. I get a message that the printer is offline, when other computers have no problem printing.

  On the problem computer, go to control panel > printers and delete all instances of the printer.

  Then, print a network Test Wireless at the front of the printer (network menu).  Note the IP address of the printer.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• XP Home - can not connect after a change of drive assignment

  I am running XP Home Edition on a system of several disc. For historical reasons I run XP on the D: drive and it normally works fine. I also have a C, E, F and G drive. I wanted to change my d drive to C drive according to standard systems. I changed the course of C to be I: but now I can't load Windows! Instead, once I entered my password it simply returns "logout". Naively, I assumed I would be able to return to disk management, if I had a problem... Obviously, the system must always and use the drive C. is there a way I can reverse the situation of the recovery console or another method?

  Hello
  OK, I solved the problem! :) That's what I did:

  I downloaded a copy of Ultimate Boot CD for Windows
  I used the built-in Registry Editor to modify System\MountedDevices
  Located at \DosDevices\I and it has changed (back) to \DosDevices\C
  Rebooted and everything is ok now!

  Microsoft 223188 article was helpful, but there are no articles that tell you how to fix the problem, if you can not connect on XP in the first place! I understand that Microsoft does not support the UBCD4Win startup but it has never offered tools equivalent system of his own other than the recovery console...

  In any case, thank you very much and a happy new year!

  Louise

• In recent weeks, I can not connect to my HP MediaSmart Server.

  In recent weeks, I can not connect to my HP MediaSmart Server.  My network do not see even if it is connected to my router.  Everything I tried was no chance.   At this point, I just want to get in there, so I can recover my files.   Any help is very appreciated.

  original title: HP MediaSmart Server.

  Hello

  I recommend you post the question in the Windows Home Server forum.

  http://social.Microsoft.com/forums/SK-SK/category/WindowsHomeServer

• can not connect password and username on.forgot

  can not connect password and username on.forgot

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Other than the foregoing, this forum has a policy that prohibits assistance to crack passwords.

  Tricky

• I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

  I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

  original title: help!

  If you have no Windows CD, you can not do a repair installation.

  If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

  If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

  Wouldn't you want some ideas that actually work?

  The error:

  STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

  indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Can not connect - I enter a password it gives message to make sure that the name and the password are correct.

  Can not connect to my tablet PC.  When the powers of the Tablet, it ask for password and user name of ny, but when I get home it gives message to make sure that the name and the password are correct.  I was on the shelf and I tried to change the workgroup and domain, it askes restart once I did c Hanger, but now I can not open yet.  The PC is running XP and it is old, 15 years!  Help!

  Hi ERASMOTERAN,

  Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

  See also:

  Keep secure passwords - Microsoft strategy on move the passwords

• How can I connect to windows vista Home premium withou admin password

  How can I connect to windows vista Home premium withou admin password

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Can not connect to Windows Vista, I forgot the admin password

  I can not connect in windows, please tell me how to reset an administrator password for windows Vista Home Basic if ever I forgot my password or my password has been expired

  I can not connect in windows, please tell me how to reset an administrator password for windows Vista Home Basic if ever I forgot my password or my password has been expired

  We cannot help users to bypass the password protection.

  Here is the link to the policy forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• HP Officejet 6600. Phone smart Samsung SIII. I can not connect my cell phone to my printer.

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop. Any suggestions on this problem as well, please?

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  SwampDoggie wrote:

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop.

  You must configure your firewall correctly.

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  What exactly is the error message?  Make sure that it does not ask your network SSID password?

• PhpMyAdmin can not connect to local MySql server on Windows 7

  PhpMyAdmin can not connect to local MySql server on Windows 7

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.