Can not start my 1410 Sam because of HARD drive password

Similar Questions

• Hi I can not download the flash player because I forgot my password.

  Hi I can not download the flash player because I forgot my password.

  It is the operating system, no Flash Player, which is asking to specify the password.  Please see what userid & password I need to install Flash Player?  for assistance.

• Pavilion DM4-1265dx does not start after the restoration, the new hard drive

  Hello:

  I have a laptop of clients that a hard drive has been giving an iminent failure message.  I was able to create a disc of recovery and replaced the original HD (640 GB) with a 500 GB HD.  I can't do the factory recovery because the hard drive is smaller, but it allows me to perform a recovery of the operating system.  The question that I am running is after he read the DVD 6, the system wants to re-start and then it crashes just in the HP splash screen.  If I turn it works, I get could not find a boot device.

  How can I get around that, before the establishment with a win 7 CD?  Is this process of recovery to a waste of time, as I did on the previous model HP computers and it has always worked.

  Thanks in advance for any ideas.

  Mike

  Hi cloud:

  To be more precise, of memory, there are two options, reset and factory restore.  Factory restore won't do it because the disk is slightly smaller.  Factory reset will allow me to put the recovery disk hard, but when he re - start, it crashes just in the hp splash screen.  When I do the three fingers of salvation, then I get cannot find the boot device.  I made the internal test and everything passes with flying colors.

  I finished download an iso image and install from scratch, but I can tell you that it is the system more screwed up that I never ran into 30 years of working with these toys.  I tired to do a repair, but that creates just again the same symptom.

  I have an Acer Tablet that I've been able to use the computers acer recovery disk that was not intended (but had the same version of the operating system) and at least was able to get the operating system and software and finished to the top with the right drivers, size of the hard drive has been ignored in their case.

  Thanks for help you, it is appreciated, but I doubt I can recommend HP to one of my clients in the future based on what I've run here.  This is inconsistent with a solution of recovery as far as I'm concerned, that MS requires manufacturers.  Lets get real, hardware fails for various reasons, and you may not necessarily the same size hard drives with the rate of change occurring in the industry.  Personally, I prefer a game of installation for the operating system and drivers disks.  Dell is one of the only ones I know who did this, and as much as their material is so so, they do at least that right of the party.

  Once again thank you.

  Mike

• Satellite P300 does not start because of HARD drive password

  I have a Satellite P300 laptop and it seems to be frozen.
  When I turn it on a blue box rises and requires a HARD drive password before windows turns on, but I can't type the password because there is no cursor.
  None of the buttons work. There is no way to type the password.

  I was wondering if I have to buy a new hard drive and if I do, can get one with more capacity that it is only 149 gb?

  I don t want to buy if its repairable,.

  Thank you

  > None of the buttons work. There is no way to type the password.
  Connect an external USB keyboard and check if you can type the HARD drive password.
  Generally, if you know the HARD drive password, the use of the external USB keyboard should work

  Would it be possible that your keyboard is broken?
  You can access the BIOS F2 press during the startup of the device?

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• I wonder if Malware can circulate and operate on my computer in the same way as LoJack where it can not be removed by simply erasing the hard drive.

  Hello!
  If I understand it, when the LoJack software is loaded on
  a computer (leave a CD/DVD) somehow or other, a change is made to
  the BIOS chip. In turn, this translates into a situation that even if the
  hard drive is wiped away, the product survives and can still call home.

  Now, if LoJack for this, as I have suggested in the past, why not a
  specifically designed * malware * do exactly the same thing if it was
  planted on a CD/DVD which a user deliberately 'responsible' for an individual
  goal? For example, a CD used to install drivers for a printer, or
  Perhaps, a CD ordered by mail to install Windows XP SP2?

  Serious question.

  Website here: http://absolute.com/en/lojackforlaptops/home.aspx

  original title: LoJack for Laptops

  You are quite welcome.

  This is a COMPUTER security professional community and technology center of security that may be more useful.  Good luck!

  http://TechNet.Microsoft.com/en-us/security/cc136632.aspx

  http://TechNet.Microsoft.com/en-us/security/bb291012.aspx

• Lightroom will not start with the catalogue of external hard drive

  Switching computers (Mac), I've updated Lightroom 6 4. He opened with an old catalog that won't only up until 2013, which is on an external drive. I tried to revive with my current catalog, and I get a message: Lightroom catalog cannot be used because the parent folder "/Volumes/ (name) / (name) of the hand catalog / (name) of the hand catalog" does not allow the files it contains. El Capitan has more patch file permissions in disk utility and, in addition, this catalog is on the same drive as the oldest catalogue is on. Any ideas?

  Sharing and permissions of the older cases seems to be a problem with El Capitan.  I tried to copy a folder to an external drive. This file was created and copied using the Mavericks.  It would not copy. Said, I have no privileges, I think that the message. It was all in Finder NOT lightroom.

  So, I clicked on the folder parent in question;  and then did you read the information.  In the result pane, I changed the permissions to "everyone".  It worked.  Then once it has been copied, I changed it back!  It takes a few minutes to update and warns that it can not be cancelled?  Don't know what it means until I am able to change permissions back.

  In any case; Save then try this. I said back first?  Yes.  YMMV.

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Windows 7 can not "see" the files on my external hard drive all of a sudden after I used ICACLS to give me full control.

  I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.

  Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.

  Thanks in advance

  Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.

  At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.

  Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.

  I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...

  Luke

• Computer does not start if the 150 GB Toshiba HARD drive is connected

  Hi, I bought an external hard drive of 150 GB PX1220E of pc world a few days ago. When I start my PC it sticks on the splash screen, and I have to unplug the usb cable and restart the pc, then connect the drive again to use it.

  Is this an error with the drive?

  Hello

  I googled a bit and it seems that it is really a Toshiba HDD.
  However, for me, this is NOT a malfunction.
  The external HARD disk is connected before starting. So I think that the computer is trying to boot from the external HARD drive and so it freezes.

  You should check the boot order in the BIOS and connect the HARD drive after you start the procedure.

• can not find restored files after restoring backup hard drive

  I had a problem with my computer so I reset my PC back to factory setting. Before doing anything, I backed up all my documents/pictures in an external hard drive.

  After successfully resetting my PC to factory setting, I ran restore backup files... I took me 4 hours to restore. Restore files has been a success.

  When I restart my PC, I couldn't find anything my back upwards. I don't know that there have been restored as I have only 50 G to 200G left of my C drive.

  I tried to look for documents, but I can't find anything.

  What happened to all my backup files?

  Hello

  Where you are restoring the data?

  Check if the files are hidden.

• Can not activate my cell phone after replacing hard drive

  I can't activate the computer

  Also the error message when I try to download content

  Hi Trevor,

  What is the accurate and complete error you get when you try to activate Windows 8?

  If you have made significant physical changes to your PC, like replacing your hard drive or motherboard, you will need activate Windows by phone. To learn how, go to the article of the product activation .

  See also the link: http://windows.microsoft.com/en-US/windows-8/why-activate-windows

  Post us the results after trying the steps above.

• Excite Pro does not recognize the of 1 TB external HARD drive

  Hi can someone please help.

  I have a 1 TB hard drive and when I plug in my excite pro tablet, the table can not read the disc.

  The hard drive is formatted in Fat32 and the blue light flashes when the drive is connected.

  I know the drive works ok, so I have another cheapo tablet which has no problem to read the HHD

  Android on this Tablet does not support drives of more than 32 gigabytes, that is why I join my drive using a usb wifi router. (For example, Huawei HG622)

• BITS can not start (error 80246008), tried to solve it, received error 1079, please help.

  Hello

  I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!

  I tried to solve it using the steps suggested,

  It's what you tried, if not, please do it might help

  See if anything here helps.

  Error 1079: the account specified for this service is different from the account specified for other services running in the same process

  If you receive this error message, follow these steps:

  1. Click Start, click Run, type services.mscand click OK

  2. double-click on Background Intelligent Transfer Service.

  3. click on the tab to open a session.

  4. click Local System account and then click OK.

  5. right click on Background Intelligent Transfer Service and then click Start.

  0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed

  because the download manager could not connect the smart Background

  Transfer Service (BITS).

  http://support.Microsoft.com/?kbid=910337>

  You receive an error message when you try to download updates from the

  Windows Update Web site or the Microsoft Update Web site, or when you

  try to start the Background Intelligent Transfer Service 0 x 80246008

  http://support.Microsoft.com/kb/916251>

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  13:06:42 UTC 08/26/11