Can not verify the update. Not connected to the Internet
I can't get last updated because of the error message saying updates cannot be check because I'm not connected to the Internet. But of course I am.
This happens on 2 Air, Air of iPad iPad and iPad 4. Min and iPhones had no problem updating.
Which seems to indicate it please. I've already removed the network, rebooted setting, delete cookies... all the basics.
Take a look at this article. There are suggestions in there that could help. I have not tried because the date went well for me when I installed it on the date of the initial version.
http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/
Tags: iPad
Similar Questions
-
I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet. The icon shows "acquiring network address". I connected the router directly on laptop computer connected to the wireless network and still unable to connect. I tried to restore the system as well, but the message says "unable to restore the system, no changes were made. Help?
original title: acquisition of network addressHello, Steve.
Try this link below on how to reset IE and let me know if it helps. -
I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
How to proceed?You can change your email associated with your media profile.
I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:Start T-bird with disabled modules.
If it works on your module is to blame and you need to activate one by one.Start your operating system in safe mode with active network.
If it works probably your antivirus is blocking or delaying. (Or driver). -
Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!
Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.
-
I can not connect to. Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it=""> -
Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.
Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.
What version of vCenter Server do you run? Only of vCenter Server 5.0 Update 2 is currently supported on Windows 2012.
André
-
BlackBerry smartphones can not connect, reset the password for the update!
forgotten my password. When I go to the login page, I get my e-mail address, click on 'forgot password' and it comes up with a new page where I get my new email address, and there is a picture of 6 letters/numbers that I'm typing in order to reset my password. I type in exactly as stated, click on 'submit' and it comes up saying "image does not correspond to" or something like that. I entered it exactly as shown. No matter how many times I do it, he only says 'no match' - so, I can not connect, or if I can reset my password. To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.
Seems I am dead in the water and locked forever. It seems that many others have the same problem with no path for resolubion.
gandcsundvik wrote:
To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.
You must call Sprint, they are your software first line and the device's hard support channel. If they cannot solve the problem, you must ask them escalate the problem to a support technique level RIM. They will, and if they do not offer to do so, you must request this firmly.
-
After that I changed the apple ID password I can not connect to facetime
After that I changed the apple ID password, I can not connect to facetime
Update your password for Facetime, too.
-
I can not connect on my site to school more since I've updated my firefox to 34.0.5.
I can not connect on my site to school more since I've updated my firefox to 34.0.5. I deleted the cert8.db and still have the same problem. Help, please!
Here is the error: unable to connect safely
Firefox cannot guarantee the security of your data on my.saintleo.edu , because it uses SSLv3, a broken security protocol.
Advanced information: ssl_error_no_cypher_overlapOne possibility is to use this extension to activate SSL3 temporarily only for a Web site that needs SSL3.
- Control of SSL Version: https://addons.mozilla.org/firefox/addon/ssl-version-control/
-
Unable to send emails, SMPT can not connect to the server
I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.
I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.
Please advice, or guide me what I am doing wrong, or what I can do to fix this error.
Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.
Step 1
In the Mail menu bar, select
▹ Connection Doctor window
In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.
Select the Advanced tab in the settings for the account and check the box marked
Automatically detect and maintain the account settings
If it is not already done.
If there is more than one account of the problem, repeat. Close the window and save the changes.
Step 2
Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.
If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.
Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.
Step 3
Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter
SMTP.gmail.com
Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.
Step 4
If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).
The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.
Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.
If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.
Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.
You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.
Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.
-
I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ? Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support
iOS 9.2.1
certificate is daily horoscope
wwhat the devil is and why it has expired?
-
It seems that someone else took the administrator account and he has rights that replace the mines on the computer. Try to reinstall windows xp professional, it tells me nothing, but freezes...
Try to connect to windows on my account, he tells me that my account is disabled.
Try to connect through safe mode that come no user name.
Trying to set up the administrator to log on without password, said that the account has been disabled.I am trying to reinstall the Windows XP Professional with the disc I have, but with this gel, I can't.
I am very discouraged and would like this to be resolved. I'm on another computer write because I can't even connect to the other.
It won't do anything when trying to go to the last good known either.
My copy of Microsoft security essentials would be not updated and I had restarted and can't get back in it is saying I had a Trojan horse and he removed twice, but he was still there. If someone else gets this problem to not restart or you cannot recover.Reinstalling Windows can sometimes be a difficult process and most of the time that it is not even necessary to solve most of the problems.
In case it is necessary to reinstall Windows XP Pro, it is imperative that you back up all your data first. did you?
In addition, if a system is compromised or broken, a clean install should be made. This means that you must configure your motherboard BIOS to boot from the installation CD (instead of the usual default, which is the hard drive). The way to do this varies according to the brand and model of your PC.
Assuming that you have the correct CD for your PC, these instructions should work for you:
http://michaelstevenstech.com/cleanxpinstall.html
http://michaelstevenstech.com/bios_manufacturer.htm
If you want to help more away from us, please answer the following questions:
1. What is the make, model and model number of your PC?
2. assuming you have Windows XP Pro installed on it, what level SP is in?
3. you have the XP Pro corresponding correct for her installation CD? In other words, if you have an OEM version, you must use a CD of the OEM version. Here again, a commercial version should work as long as it is not already in use elsewhere. What level of SP is the disc in?
4. you say that you can not connect to Windows, yet you mention that MSE has given you a message. Please specify.
Finally, once you're convinced that all your important files are backed up and if you want to try the Windows XP system restore (or other methods) before something as drastic as reinstalling Windows, we can give you advice. And then, if damage malware is really bad, it may not be worth it. But if you want to try, let know us.
-
I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
and I also try to fix or diagnose, but its still not not workin...
Please help idk what 2 do more...Hello
Good luck, you need technical support for a real computer store or system manufacturer is supported.
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon. You can download these on another
computer if you need to and transfer on removable media.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Original title:
Error message
I use windows 7 laptop I format. After installation of Microsoft, accounting software and I wanted to backup restored it gives me error massage "can not connect because the version of the application is older than the data base of the company.» Up grade the application. " Eventhough I used the software even before I format the computer laptop and does ' t give me the options to upgrade. Need help.
This means MS accounting requires the latest updates that have been installed originally creating this accounting database
Accounting MS was abandoned a few years previously, so updates are not driven by windows/office update
-
BlackBerry smartphones can not CONNECT to THE SERVER
Hello need help. My Blackberry Curve 8520 (OS 5.0.0.1036) does not connect to the server. It shows my network (Vodafone) and gets a strong signal; makes and receives calls; connect wifi; but it is also completely static. After the first Setup email screen I get: your device has a connection to the server problm. (I think it means the Blackberry server?) So I can not connect any email. Very well in my other near-identical Curve 8520 Sim Card work. How can I do please? Y at - it a reset or software update is complete I can undertake? Thank you, Michael
I can help you with the it policy... lack of procedure for access to the BES server, this (and only this) cleanse a BB to an it policy:
- Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings
If you do a backup/restore, don't do this basically... rather, backup/restore only the databases specific you need (for example, calendar, contacts, messages, etc.) and more precisely to avoid data bases having something to with COMPUTER policy, business, etc.. If you restore those, the it policy will be conscientiously restored to the device, and you will be right where you are now.
As for a BES Server trying to reach out... There is nothing that I can offer you. Your best bet is to talk to your provider and make sure you have no BES-level service enabled on your account of them. Who should (note 'should'... is there no guarantees) prevent a BES server to reach out and the reactivation of your device.
Good luck!
-
BlackBerry Smartphones BB10 Dev Alpha 10.0.9 can not connect to the Desktop on Mac software
I followed the updated documentation of my DevAlpha to 10.0.9 on Windows successfully. How ever, I can not connect to my Mac for development. I can't connect my device to Desktop on Mac software. Is this as expected? When is a Mac Desktop Software for DevAlpha BB10 available?
Thank you
Dong
I have think.the the mac version of the Desktop Manager update is not currently available. After RIM released the new update, it will be resolved
Maybe you are looking for
-
resolution screen on a Mac Mini
I'm considering buying a Mac Mini and want to use my Benq Sensye LED current monitor that displays in 16 / 9. I'll be able to use the resolution even if I connect it to the Mac Mini?
-
error ssl_error_bad_mac_read on payment by credit card
I'm trying to process a payment by credit card for Norwegian airlines. When taking me to the verified by Visa page on my credit card account ( https://www.vpv.scddesjardins.com/ ), I get the secure connection doesn't have a page: "an error occurred d
-
Download El Capitan in 2 days? Really?
I had just installed a cleaning of my OS on my MacBook Pro retina end of 2014 and I chose to install it via recovery mode, but Yosemite was there instead of El Capitan. So now I download it in the App Store its only download less than 1 MB per second
-
My iPod touch is fully charged and I can listen through head phones while it's plugged in, but as soon as I unplug it, there is a loud 'click', and then it goes dead. Someone at - it similar experiences? Suggestions?
-
HP Mini HP1100LH: HP Mini (HP 1100LH) system password reset
Having the same problem as everyone else. Totally forgot the system password. has obtained the "password check failed. Fatal error... System stopped. 2MC9237YM4. Any help is greatly appreciated.