Can't ssh to the remote system to guest VM

Similar Questions

• Panel Test DAQ opened on the remote system

  Using the command-line tool nidmfpan.exe you open a test panel to a device on your system by specifying its name.  Here is an article which he described.

  http://digital.NI.com/public.nsf/allkb/9B628A8B1B13136F86256DDB0004DE4D

  But what is not mentioned is how to call this function if it will open a panel of test on a RT system.  This is possible because in MAX, you can select the hardware and the same test panel is displayed, but I don't know the right way to call this EXE, so it will open it.  Is there any place that command line switches are documented for this program?  And what is the method for opening a panel of test on a piece of DAQ hardware on a remote system?  Thank you.

  Since nobody has been able to help me I thought about it myself.  If you call the application nidmfpan.exe with the command line switch send_break_action: with the IP address of the remote system it works great.  I also found you can use the/dev: instead of the /devid: to specify the device by a unique identifier instead of the alias MAX.  Thus, for example:

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1/dev: {84535FB2-8F2A-11E6-8061-00802F25AF78}

  Or

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1 /devid:cDAQ1Mod2

• None of the remote systems are found in Max in VMware

  I started using virtual machines and I don't see any remote systems listed in MAX within the virtual machine, but I see the remote system on my real machine. It is not a big problem because I can always run my code and connect to the target of RT of the project within the virtual machine, but when I need to look at MAX it would be nice to not switch back between my VM and the computer. I wonder that if it is behavior, others have noticed, or is - it possible my MAX database is corrupted? The section of the entire remote systems doesn't fail, just no hardware found and listed under it when I update. I wonder if this is a problem with how the virtual machine sets up the connection TCP must work with the real hardware. Hoping that someone more competent than me in this relm can point me in the right direction.

  You have probably done this, but you made sure that your VM is set to a "Bridged" mode where the network connection between the virtual machine and the host allows him to get an address from an external DHCP server and is not only local host machine?  MAX can only auto-detect devices to its subnet via a proprietary (OR-RFP) protocol or via AppleTalk (according to how the devices are configured and what software is on them), and if the interface of the virtual machine network is in mode "NAT" or "Host-Only mode" which interferes or completely blocks the discovery method.

  -Danny

• What are the limitations of access to the remote system?

  I've got a PXI-1042 remote controller 8108 and 5112, 6723 & 8420 PXI. I can see all the devices remotely from my laptop to the MAX 4.4 (under NIVisaServer).  My problem is that I don't know if I can use all of these cards remotely?

  I am programming in C++ of MS using VISA & DAQmx libraries and have been able to use the serial ports of the 8420 distance without any problem. But the programming remotely 6723 poses a greater challenge. On previous projects (not involving remote systems) I simply defined virtual world channels in NOR-MAX and DAQmx... used library calls to control. But I'm not able to access the Global virtual channels on the remote system and I can't create anything on my laptop that connect la carte 6723.

  Also, I can't run OR-SCOPE Soft Front Panel on my laptop because it is impossible to find the 5112 digitizer.

  Is it possible to have full access and the capacity for remote 5112 & 6723 card?

  Ken

  You are able to view the various devices on the network to the MAX, but unfortunately you can not create glodbal virtual channels or use the functionality of these cards.  The best way to use these cards on the network is to use the remote façade (in LabVIEW only), Remote Desktop, etc.  I have included some useful links to get more information.

  Display of an Application or a front panel remote using LabVIEW

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvhowto/viewfrntpnlrmtlyusnglv/

  Do the NI 5102, NI 5112, and NI 5911 Oscilloscope cards support remote device access (RDA)?

  http://digital.NI.com/public.nsf/allkb/8AC1067C0944FACD8625697A005B92C8

  What is device Remote Access (RDA) and where is the server?

  http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• How to replace Labview RT10.0 with RT8.2 on the remote system?

  LabVIEW RT10.0 is installed on our new PXI-e8133 controller. Our host is running Labview RT8.2. That's why I'm unable to download and run a VI from the host to the remote system.

  I want to download RT8.2 between the host and the target (so replacing/removing RT10.0 on the remote system). On another controller, we could choose the 'old' RT8.2 by download to MAX (which replaces the latest version). This is not an option with the new controller. Add/Remove software MAX, available versions of RT on the host is 'none' (even if RT8.2 is listed under the software on my system).

  How to install RT8.2 on the remote system? I have to completely remove RT10.0 first of the remote system?

  Thank you!

  Unfortunately, the minimum Version of the compatible LabVIEW RT for the PXI-e 8133 is 2010. This means that you must either upgrade to LV2010 or choose another controller.

  Kind regards

  David Ashlocke

  Technical sales engineer

  National Instruments

• VISA does not recognize the remote system max

  I tried to configure the instrument cards in a chassis SMU, and I'm unable to get a VISA to recognize.  Reading some other posts related to names of resources VISA, I found that you should be able to drag and drop devices Max NOR in a Labview diagram, and it will automatically create a resource VISA for device control.  I am able to do that the name for the devices installed on "My System" (COM1 for example), but when I try to do 'Remote system', a few drops in a block of text.  If I try to create a resource VISA directly control, the drop down menu displays only the devices on my system.  I even tried to change the VISA category for the control.  Still not get visa to recognize the remote devices.  Please notify.

  Working with Labview 2012 SP1 f5

  PXI chassis, 1082

  Controller OR SMU 8133

  VISA 5.4 installed on PC

  VISA 5.4 installed on the controller

  The firewall is disabled for the NIC in chassis

  Thank you

  GSinMN

  http://digital.NI.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• I can't connect to the remote desktop through VMWare on my windows vista with IE9.

  I need to set up a remote desktop access in a remote installation. I got an ID and a personal password to access their desktop remotely, but I can't get to the portal clinet vew VMWare server. I am able to set up access on my other computers with windows XP IE8. and Windows 7 IE8, but not windows Vsta IE9. I tried to download enhanceie.com/dl/IE8v.reg but when I click on the icon to access the portal I get a «Cannot find the file specified...» meeage "does anyone have a solution to this problem?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

• Where is the peripheral origin obsolete event ID 370 print spooler? Obsolete device can be removed from the operating system?

  I get a recording of event ID 370, about once every four days, what about the EPSON Stylus COLOR 460 printer ESC/P 2. I recognize the device as an old device, which is no longer necessary, that I thought was completely uninstalled years ago and I am slightly surprised to see that the tracks still on the computer, or not, as it appears.

  It is that I don't know if this record event was caused by a device driver package or the registry keys and values? Is the event ID 370 caused by or for both (device driver package / registry values) being obsolete?

  I have the old appliance any longer, so it seems sensible to remove traces of the system and in turn eliminate the causes of event ID 370. However, to find all traces causing the registration of the event? What traces can be removed without problem?

  1 today, this device does not show as a device available in display devices and printers to devices and printers.

  2, I was unable to see a name similar unused volume in trying to remove the old device (when looking faded icons in the branches of the Device Manager with emphasis on -pilot no Plug and Play, other devices, portable devices, Port (COM & LPT), Printers).

  3 reveals regedit there are registry keys and values in the registry that reference naked always at "EPSON" searches for the word. Yes, I have reason to assume that these registry keys and values have caused event ID 370? Is it safe to delete the registry entries, or should the registry key entries to receive new values? (I don't want the deletion of these registry values to cause instability in the print spooler.)

  Event ID 370 Description:
  The print spooler could not regenerate printer driver information for driver Epson Stylus COLOR 460 ESC/P 2 for Windows x 64 environment. Win32 system 2114 error code (0 x 842). This can happen after an upgrade of the operating system or due to loss of data on the hard drive.

  Search for "EPSON" in regedit concludes:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\ {in} {KEY} 13.10.2011, 13:18 HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\PerHwIdStorage\PCMCIA #SEIKO_EPSON-WWB101EN20-357A\
  HKLM\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2
  HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2 {in} {KEY} 13.10.2011, 13:54 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3\Epson Stylus COLOR 460 ESC/P 2

  It seems that traces of information about devices are still present in the registry (invalid entries), which causes the event. Run a registry cleaner will solve this problem, but please visit the following link before continuing:

  http://Windows.Microsoft.com/en-in/Windows/are-registry-cleaners-necessary#1TC=Windows-7

• How can I actually protect the operating system of my computer?

  At the time when I turn on my computer there is what is supposed to be "updated" something MicroSoft.  In other words, someone just hacked into my
  computer and is committed to change the operating system on my computer.  I would like to prevent this.  How then?

  It is probably not a hacker but instead MS just the things you really need to update as a security update.

  You can disable updates, but it will more vulnerable and lead to instability.

• HOW can I FIND ON THE OPERATING SYSTEM that CAME WITH MY HP Pavilion A6142N

  I use a Windows 8 operating system, due to my work I need to use windows 7, I bought this computer and I'm not sure what she had on her at the origin or even if that counts down the slope for window 7.   my HP model is a6142n and the product # is GG045AA-ABA.   I want to make sure I'm a computer to use once I made the downgrade.  How can I know what this computer came with me this computer is a 2007 model. ?

  Hello

  He ran Vista initially and Yes 2007:

  http://support.HP.com/us-en/document/c01075987

  Kind regards.

• Can't ssh to the virtual terminal macbook linux machine

  When I try to ssh from terminal to a virtual computer running on macbook I get the response below.

  MacBook-Pro: .ssh # ssh Pei 2222 [email protected] - v root

  OpenSSH_6.9p1, LibreSSL 2.1.8

  debug1: read/etc/ssh/ssh_config of configuration data

  debug1: / etc/ssh/ssh_config line 21: apply options for *.

  debug1: connecting to 127.0.0.1 [127.0.0.1] port 2222.

  debug1: connection established.

  debug1: permanently_set_uid: 0/0

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/identity type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/identity-cert type - 1

  debug1: identity file /var/root/.ssh/id_rsa type 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_rsa-cert type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_dsa type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_dsa-cert type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_ecdsa type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_ecdsa-cert type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_ed25519 type - 1

  debug1: key_load_public: no such file or directory

  debug1: identity file /var/root/.ssh/id_ed25519-cert type - 1

  ssh_exchange_identification: Connection closed by remote host

  This isn't a problem on the virtual machine in OS X.

• This computer can't connect to the remote computer. ONLY 2 people it out 200 users...? baffeled by WindowsXPe Thin Client RDP connection

  Here's the situation.  We have 2 TS servers running WIN2K3 and 200 users with Thin Clients.  We'll call it the first server A and b of a second.

  They normally connect to an IP address and they will be directed to the server A or B according to the load.

  However; users can still select the specific TS server, they want to connect to.

  If user 1 and user 2 cannot connect to Server B.  They get the error listed above in the title.  However the user 1 and 2 can connect to A server.  If they say:

  192.168.123.2 the two of them get

  192.168.123.3 the two of them cannot get.

  I deleted the user de.3 A profile and it still can't get.  I have checked no orphan key inHKEY_LOCAL_MACHINEMicrosoft\Windows NT\CurrentVersion\ProfileList

  I checked the settings in TSCC. MSC, I' checked worm Licensing by user and they are good, I gave them full administrator privileges and still not pass via the serveur.3, they adhere to all groups within the ORGANIZATIONAL unit that they can connect to TS, they were able to connect to her very well this back on Wednesday.  It is not a firewall issue and port 3389 has been verified in the case otherwise he would not just these two on each CT they try.

  Again, they can get utilisant.2.

  In the event de.3 Viewer I can see users connected CORRECTLY but then it pop their right.  There is no other error message when connecting, just the success Message in the security log.

  Let's bounce servers tonight so I'll have to turn it back on and I pray that they can later log on this server, but I'm baffeled.  Why only 2 people would receive this question and most (not sure how many others there may be, but I know 30 people connected today on this server and worked out of it) people are not getting an error.

  The thin client on their desktop is not the issue, because the error follows them any CLIENT LÉGER, they are connecting from.

  Short of this re-boot and short to delete accounts and recreate them, ideas?

  Found the problem.  I did not remove the key to all the indicated previously.  I should have done that for this user since her CentralProfile Key was empty when she had to be filled in by the system.  Removed his Key specific SID for listed above point and viola.  User can connect.

• Why can I not use the variable system building blocks in a user variable?

  Using FrameMaker 11... I would like to make a short variable which includes simply all year-round - not months, no date (e.g., "2016").  It is for a page of bibliographic information in my documents, which would also quickly forget.  I want to just make sure that the year on this page is current (and auto update, if necessary, when I build the book).

  I just had to re - PDF and re - publish a document for this reason (and our release process is anything but 'speedy').

  You can change the definition of one of the... Date system variables so that the year of release. For example, to change the definition of The Date of change (Short) in <$year>.