error 53 system produces "net view \\computername.

Similar Questions

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• KB2536276 - Windows XP PC getting "error system 58" when you do a net view \ the SMB server disks

  Since the update of security Windows KB2536276 has been loaded on Windows XP SP3 PC on our network of customers, they

  could not map network drives to unix SCO SMB servers 'Samba' software file sharing.  When they run the DOS command

  net view \ is returned an error 'error system 58'.

  The problem cannot be resolved by deleting the KB2536276 update, restart the PC and then the command net view runs correctly.

  We need either this patch to be fixed and re-issued or have a method of prevention the patch re-loading

  Thank you

  David Spellman

  See

  https://Bugzilla.Samba.org/show_bug.cgi?id=8238

  It is a bug in Samba. You can find a patch under

  https://Bugzilla.Samba.org/attachment.cgi?id=6593

  Please be aware that this only occurs if you use plain text passwords which are strongly not recommended for ages in Samba.

  Hope that helps,

  Volker

• The endangered network devices / system 58 with Net View error - something "randomly" seems to have occurred to my network 2-3 days ago

  I am running Windows 7 Ultimate 64 bit on a Toshiba laptop computer on a network that also has a Synology Diskstation 710 +. There are other Windows 7 machines that continue to work perfectly with the NAS. My LAN is only small, so I run a working group called "WILF" owned computers and NAS.

  Until 2 days ago, everything worked perfectly and had been stable since the SIN happened more than six months ago. Then:
  -J' noticed that he was missing the NAS drive (which normally appears as "DISKSTATION" under "Network" in Windows Explorer).
  -Backup software was still able to access the drive normally.
  -I could manually create a connection to the drive in Windows Explorer by typing "\\DISKSTATION" into the address bar, which worked well.
  -Of course, I could ping the device, and I have confirmed that it is correctly in the my network router routing table. It has a static IP address in a reserved area.
  -L' other computer normally on the same LAN is a workstation running the same version of Windows, no problem.
  To try to find flaws, I went in the command and ran 'Net View'. The spokesperson system:
  "58 system error has occurred."
  I used the other workstation to confirm no problem with a network browser (in fact when writing the workstation is the master proposed stand-alone browser).
  Review of other forums, I saw references to Group Policy editing, etc. But (a) I already have pretty much everything these game settings they describe, but more to the point (b) I am a firm believer that computers do not start at random to behave differently, everything that happens all of a sudden started - network settings, group policy, IP addresses, the names of devices etc... None of this has changed. I find myself thinking that there cannot be a settings issue given that the parameters have been very well three days ago. However, there no obvious "triggering event" visible to me - so I wonder if a recent Microsoft patch (for example, a security patch) that auto-updated itself on my system has caused this.
  Any thoughts? Clearly, something went wrong, and I think even that relative layman I have to assume that low level network commands are not working is probably related to the fact that I can't see certain features in the Windows Explorer window.
  Help appreciated.
  Thank you.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• The 'Net View system error 6118' command prompt

  Hello, I use windows 7, and just to know function prompt on other devices connected to the network, so I typed a clear view into the command prompt, but it displays error 6118 and list of servers for this workgroup is not currently available. Please advise me by giving your necessacry steps. Thank you

  Hello

  NET VIEW command is used to display a list of computers or network resources. The NET VIEW command displays a list of computers in the Group of specified work or shared resources available on the specified computer.

  Click on the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/fb6210f7-8167-4FA3-b0ea-ce71426e5fc3

  Good day!

• ERROR 6118 "NET VIEW" COMMAND PROMPT

  Hello, Im having a problem with the Net View command in CMD. I have get and error; 6118 Im running windows os 8 and I have installed norton security if that helps any. Ive tried to find solutions to this problrm but no luck. If you can help me with the problem would be great :) Thanks for your time! If someone needs to understand what is going on then just ask me details :)

  Hello

  The computer is connected to a workgroup?

  There are scenarios when a computer is connected to a working group and the name of the specific computer that has an operating system is not the same as that of other computers. Here is a link for example:

  Refer to the suggestions for Ztruker , posted August 27, 2009:

  http://social.technet.Microsoft.com/forums/Windows/en-us/77ead57a-A3F7-4E07-9e66-2ee2abb34d97/win-7-network-browser-not-seeing-other-XP-Pro-systems?Forum=w7itpronetworking

  You can also try turning off Firewall network and software security Norton temporarily, once you enable an Internet firewall, you may not able to find, or "Browse," to other computers on your home network or office, and you will not be able to share files with other computers on the network of Home Office r justify.

  Important note: Security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For any question related to the area in gray, you can check the link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/8f7ca1af-190b-4377-971C-b86d2862136c/Windows-8-pro-domain-change-option-greyed-out-in-system-properties?Forum=w8itprogeneral

  As suggested earlier, you can also post the same query on Microsoft TechNet forum.

  Please do not hesitate to ask for more queries on Windows.

• net view \\addressIPserver fails with error 53

  Computer, net view \\addressIPserver fails with error 53, while it works from b
  If I restart the server, then it works.
  -online what command can I enter to make it work again, without having to restart the server?

  Server, computer, b are all seven windows

  ipconfig/all shows that Netbios over tcp/ip is enabled

  Hello

  Find computers on a domain network?
  If the computers are on a domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• System table or view in oracle to contain the error message

  Hello
  
  I created a group Materialized View Refresh. and execution in a single schema.
  
  Start
  DBMS_REFRESH. Refresh ('TEST');
  end.
  
  There is a lot of reason for the failure of execution of the Group MV refresh (such as network, change of base table problem). At the time of the failure of execution of oracle to refresh group displays an error code and error message.
  
  Question: -.
  Could pelase propose you any system table or view in the oracle database that can contain any error message and error number? I have to get this error without exception handling in pl/sql block.
  
  Thank you and best regards,
  Vinod Gupta.

  As I mentioned, there are exceptions that you can't intercept. If this work of dbms_refresh.refresh ('TEST'); results in an exception fatal server (usually an ORA-600 or an error ORA-07445 ), you can not only catch a PL/SQL block exception. All you will see (if you have a client session), is the "+ ORA-03113 end-of-file on communication channel +" error.

  Yes, you can catch a number of other exceptions. And Yes, you can write these exceptions to the errorlog table.

  Create a package error log that makes the insertion in the errorlog table. Use an autonomous transaction because it allows the error log to insert without making all existing transactions.

  Also record all PL/SQL of the error stack trace, because it helps to determine where the exception occurred. Something like dbms_utility.format_call_stack allows to get the call stack and insert this result in the error log line in the error log table.

  Then call this package since the exception handler for the refresh job.

  But before you do, you need to consider whether or not you remove this exception or not. If you do, then Oracle work process does not see this exception and think that the work has been a success. It you do not have, the process will be the exception, to realize the task failed and reported that employment for re-delivery.

  So basically, your refresh job will look something like this:

  begin
    dbms_refresh.refresh ('TEST');
  
  exception when OTHERS then
    -- the package will record the actual SQLCODE error and call stack
    errorLog.saveException( appErrorMessage => 'Refresh job for TEST failed' ); 
  
    -- we want the job processor to see the error and reschedule the job for execution
    raise;
  end;
  

• CMD 'net view' to show the other operating systems.

  Is there a cmd command similar to "net view" except it shows computers/devices linux, mac, ios and anroid?
  When I type "net view" in CMD in my computer windows 7, it only shows the computer name of windows 7 my mother, not my portable linux or my ipod that are also connected to the same network.

  Hi, Nathan Barrett,

  You use the command correctly?

  net view \.

  Or

  net view/Workgroup:

  Or

  net view/all

  net view

  Returns the computers in the network or the current domain. This list shows only computers that have file and printer sharing enabled.

  net view /all

  shows all available actions, including administrative shares like C$ and admin$

  net view /domain:contoso.com

  lists all computers sharing in the contoso.com domain

  net view /all /domain

  shows all shares (ordinary and administrative) in the field

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Error: EVENT_BOOT-SYSTEM-DRIVERS-failed

  I get this error message in the event viewer. I think it's causing the machine to stop and restart itself. Does anyone have an idea on what this is?

  The explanation in MS Help and support says "the specified drivers is not loading properly. The driver may not in the expected location. »

  I'm not sure which driver they speak or even how to check.

  It is logical that this is what causes the machine stop and restart, just need a little guidance on the pilots to check...

  Hello

  What is the brand and model of your computer? You may need to consult the support site that makes your computer and download all the drivers update for your computer system.

• Ho can solve the error, "the system cannot find the specified file. (0 x 80070002) » ?

  There can someone offer advice, IN PLAIN ENGLISH, SPEAK NO TECHsolve the error "the system cannot find the specified file. (0 x 80070002) "I get when I try to back up my computer using an external hard drive. I tried to update the software of the external hard drive, cleaning the registry, send emails to tech support and the curse / gnashing of teeth. Windows is supposed to make it easy to save with a single click, but it seems to be impossible! I looked for solutions on the net, but if I knew what the heck was a hex code, I wouldn't need to ask this question. Help please!

  Hello

  This is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Problems with my window, system windows photo viewer 7. ____

  Error message: the Windows Photo Viewer cannot display images because there may not be enough memory available on your computer.  Close some programs that you do not use or free up hard disk space and then try again.

  I got rid of some programs and some photos, but still the same error message.  Can you help me please?

  Thank you for your help.  I did a system restore and that does the job.  Works fine now as before.

• Errors and warnings in Event Viewer in the field of applications on a laptop running Windows 7.

  I receive a number of warning and an error message in the event viewer in the field of applications on a laptop running Windows 7.  Is there a way to fix this or fix another way?

  Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes four major newspapers in Windows. These are application, security and system with Applications and Service logs as a source more details... For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  8. for Vista and Windows 7 Google is the best source of information. Search for selected text in the Description part of the report (not of the particular words of phrases) that "this exact word or phrase" Gets the best results. Focus on Social Technet and Microsoft Answers reports in the last 12 months. Look elsewhere if a response is difficult to find.

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue