Cannot access vm 5.1 Esxi host visitors

Similar Questions

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Cannot insert license in an ESXi host

  I can not insert the valid of ESXi keys to change evaluation mode Full license an unlimited license manages the host and the license doesn't "stick" I r its license problem so I need to get the timeout message.   Can I delete multiple hosts, insert the license and then re add hosts?

  Sorry for the very late reply.

  I was using the license for ESXi free Hypervisorr.  I could insert but the message was that she was allowed to always.  However, I had installed the trial vCenter and Windows Server Technical Preview.  It was impossible (for me) to tell the Vcenter VServer not managing ESXi hosts. Spend too much time on it I tried to uninstall the vCenter but apparently, he wrote many keys in the registry that are not removed automatically.  Unfortuantley it does for many, if not more, VMware products install on Windfows operating systems.  They expect that for sure you will want to install product Ref.   That is why the ESXI thought it was even if it was handled (from a non-existent server).  I asked the problem by far for a few days and then continued to the next version of what is now officially called Windows Server 2016 previews tech build 9841 (of October) would stop work on 15 April in any case, I found my copy of the server.   The next is expected early next month.  So I deleted all the Windows Server that was VM.   Iwill install vSpre customer t (not the web client!) and must be driven to re-inter code by ab.  If Esxi still thinks its managed by a non-existent Windows Server so I guess I hope it works maintenance or re - mode install ESXi servers.

  Although tedious to be sure, it's the only way to learn - the documentation is totally insufficient.

  Thanks for the reply.

• Cannot access the synology on nested host iscsi datastore

  I installed a Synology ds 414 version - 5-2-5592, with 2 volumes prescribed as 2 iscsi targets, I'm running 2 esxi 6 guests, a physical and a nested, phyiscal host I can access the target immediately without any problem, the host nested when I use the dynamic discovery, I can see the target via the static mapping but LUNS never appear and I can't add them as data stores.

  I put the target to allow multiple sessions on the synology, I can ping from the nested host synology vmk. I added the host nested as initiator allowed on the Synology, although I didn't need to do it on the first host as default value is set to read / write and there is no authentication set to synology.

  I have attached a few screenshots

  Any help would be greatly appreciated.

  

  You have activated on your physical host vSwitch promiscuous mode? See this thread to another: Nested ESXi 5.1 and iSCSI Shared Storage

• Cannot add VMFS datastore to ESXi host

  Hi all

  I have a problem with the CF 1 logical unit number which can be seen as a device through several paths on all 10 hosts in a cluster, but it appear as a data store VMFS on 6 of the hosts. Other LUNS of the same Bay appear correctly on all hosts. 10 guests see the LUN with the same LUN ID and all hosts are identical regarding the version of ESXi (5.0 Update 2), HBA and firmware models.

  On the 4 hosts who can see the device but not the VMFS data store, it seems that he sees the LUN as a snapshot: 'list of snapshot storage vmfs esxcli' translates into:

  4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Volume name: LUN101_SAS2
  VMFS UUID: 4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Can mount: true
  Reason of mountability-United Nations:
  Can will: false
  Reason for non-resignaturability: the volume is actively used
  County of measure pending: 1

  The UUID VMFS above matches the UUID VMFS seen on 6 guests who can see the VMFS data store.

  When I try to use 'Add storage', the device appears with a lambel VMFS: LUN101_SAS2(head). I don't know why (head) was added to the label of VMFS. Oscreen n the following signature to keep 'existing' and "Assign a new signature" options are grayed out. The only option is "Disc Format. I need to keep the existing signature because it run virtual machines that have their files .vmx and hard on this LUN.

  Would the fact that I have virtual machines running on this LUN, I cannot choose the option to "keep the existing signature?

  I need to Storage vMotion these virtual machines to a different LUN before I add the VMFS datastore to 4 guests?

  TIA

  Hey RoscoT;

  Try the following command

  #esxcfg - volume - l

  This should show the volume

  To constantly increase the volume, use esxcfg-volume - M followed of the UUID or volume name

  Concerning

  one

• vCenter 6 in a WAN configuration - cannot add 6.0.0 ESXi host, is stuck at 80%

  All,

  I tried a day now to find a solution to this. We have 6 break-in LAN1 vcenter, connect a host ESXi LAN1 and ESXi another I LAN2. LAN1 and LAN2 are connected with IPsec. Resolution of DNS works both ways, as far as I can tell and all ports are open between the hosts. We had everything up and running but due to hardware failure, needed to replace the ESXi I LAN2.

  With the new host in place, I am not able to add to vcenter. I tried to use the name and IP address. I even downgraded to a previous version of ESXi, but all does not work, stuck at 80% progress bar. Then the message "Failed to contact the host specified." Checking the logs I see that vcenter is actually connected to ESXi in LAN2 and creating the account vpxuser to communication works in one way at least.

  I remember I had the problems of implementation of the previous host in LAN2, but all of a sudden it worked simply.

  Someone at - he had no idea where to start looking?

  / Mattias

  Make sure you have the MTU settings assign identical values everywhere.

• An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination

  Hello, I'm trying to P2V server and you get this error.

  Conversion from one physical host to vcenter.

  I see with success, he creates the snapshot and crashes just after it.

  Thank you in advance.

  The error is: 2014-10 - 07T 19: 28:27.487 - 04:00 [warning 04752 "Default"] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.2.254.89:902
  do you have to allow you access to your physical machine to the server ESX port 902
  HTH

• FAILED: An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination

  Hello world

  I get this error when I try to convert a machine, this machine are in the same network with others that I had no problem to convert, the error occurred in 1% complete. I tried several other suggestions from others posts, with no luck.

  I have vmware converter 5.5.2. Someone at - it something idea?

  Thx a lot.

  Your error is:

  2014 08-18 T 06: 49:12.641 + 02:00 [10064 "Default" warning] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server cld01vmwh18.replycloud.prv:902

  Need to allow access to the machine to be converted to cld01vmwh18.replycloud.prv:902

  HTH

• Allowing access to ESXi host to other subnets

  Hi all

  I use the free version of ESXi and it is in course running on the network. 10.32.125.x I noticed that if I try to connect to the host via the Client vSphere from another network, such as 10.32.126.x, I can't.  I can't ping or SSH host either form the 10.32.126.x network.  All right if I'm on the 10.32.125.x network, which is the same network that the server is running on (10.32.125.63 is the IP host address).  I can access services on thin virtual machines from other networks, just not the ESXi host itself.

  Any ideas of how I can allow access of networks other than that on which lives on ESXi?

  Thank you

  Hello

  You try to access your client vSphere ESXi host, make sure that your DNS and default gateway are defined and correct? Is your default gateway on the ESXi host on your router?

• Cannot access [\\vmware-host\shared files], no drive z: on W10 visitors in W10 hosts running Workstation 12 Pro

  The title says it all: I have guests Windows Pro 10 tree on a host Windows 10 Pro running VMware Workstation 12 Pro, and I can not access shared folders of the host within the VM settings (\\vmware-host\shared records), or the mapped Z: drive.

  Shared folders on the host computer using the normal windows, sharing mechanism are perfectly accessible from the guests. Shared folders on the guests using the normal windows, sharing mechanism are perfectly accessible from the host. Only those shared in the virtual computer settings are not available,

  I tried to remove and then re-add files, to temporarily disable and sharing, but also re - install VMware tools, with no chance of return. The device worked fine until my clients running Windows 7 and 8.1.

  I know there are questions like that all over the forum, but I have found no working solution for workstation Pro (and Windows 10).

  Someone at - it ideas?

  There was another thread a few days on the same subject, where it has been fixed by completely uninstall VMware Tools, by restarting the OS invited and reinstall the tools (Important: not only do a "repair" install).  Have you tried full uninstall-reboot-reinstall of tools?

  See you soon,.

  --

  Darius

• Cannot access ESXi host in Vcenter after moving to accommodate different subnet

  I moved a different host EXSi 5.5 on a new subnet at a physical site.  The host has been identified by IP not the DNS name.  After the start of Vcenter, I realized my mistake.  The host is always identified by the old IP so it appears as disconnected.  I was hoping I'd be able to simply change the identification of IP address, but have not been able to see how to do this.  I also tried to remove the host (this configuration has a data center and a host), but I can't do it.  I can't add the host (with the new IP address) I get an error message that the data store is identified with the original host.

  Is there an easy way to this?

  Welcome to the community - you need to remove the old entry in your inventory (using the command delete inventory) and then re-add the ESXi host FULL domain name.

  I also moved it to a more appropriate forum-

• Cannot access ESXi host to download the vi client

  Just installed ESXi 3.5 on an HP DL360.  After that installation went and changed the configuration of network and account/password root via the console.  Now, I want to install the vi client.  I point a browser on my laptop to my ESXi 3.5 hosts and get a context connection.  I assumed that I would use my root account and the password, but it does not work.  How to do this?

  Never seen anything like this.

  Please check the ip address, subnet mask and gateway you have configured.

  If you use the host name of the ESXi in the browser, also make sure that solves the correct IP address. (nslookup YourHostName)

  The connection popup shows the name/IP of the ESXi host.

  BTW: What DL360 generation do you use. In my lab environment, I'm under ESXi 4 U1 on a DL360G4 without any problem.

  André

• Disconnected ESXi host cannot reconnect to VCenter

  ESXi 4.0.0 Releasebuild-261974

  VCenter 4.0.0 build 162856

  VSphere 4.0.0 build 162856

  I have a host on the 16 who became disconnected from VCenter recently. I spent some time online means to join new host in VCenter, but each has failed so far. I'm not avoiding perform a reboot of the host due to production VMS are residing thereon. Also, I can't access the Web page for the host, which works very well for the other guests, we have running: https://

  I am able to ping both the IP address and the name of FQDN of the host successfully.

  I did the following things in the hope of resolving, who all have failed:

  1 restart the Management Agents on ESXi host from the windows of the customization of the system.

  2. test the management successfully and rebooted network management network

  3A tried to reconnect to the host via VSphere

  4 registered and the Mode of Support Tech executed the following command: /sbin/services.sh restart when I run this command, I notice that the vmware-aam service does not start.

  Error messages:

  1. (in an attempt restore the link) cannot communicate with the specified host. The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  2 (of the newspaper of the Management Agent) panic HttpNfcSvc another process is listning IDE oucederomsurlesecondport 12001; Please ensure that another instantiation of pass run; Cannot initialize the service of httpnfc.

  3. (journal of the VirtualCenter Agent) 0x1499bb90 error 'App' could not discover the ofr is authenticating with host agent version. ; could not resolve version ofr is authenticating with host agent. ; Temporary creation connect spec: localhost:443.

  4. (of the newspaper of the VirtualCenter Agent) 0x1499bb90 error 'App' SSLStreamImp::BIORead (0x2e408bb0) has expired; SSL connection failed with error BIO

  [5 (journal of the VirtualCenter Agent) HttpUtil::ExecuteRequest] error in sending request - SSL Exception: transfer the SSL expired local: 127.0.01:63355 peer: 127.0.0.1:443

  Any suggestions would be greatly appreciated! Let me know if you need to work as well with more information.

  Thank you!

  BOE

  It is an ugly one. At least a restart if not re-install. To minimize downtime, you can close out of virtual machines to the inventory and put them on another host/cluster.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp