Cannot add or change items in CombBox design or execution

Similar Questions

• Cannot add other changes by using the adjustment brush in Lightroom 5.

  Use Lightroom 5 - when I go to a previously published picture to do more to change by using the adjustment brush, I opened the effect I want to use (Dodge, for example), but all of the sliders are inoperative. The word "Dodge (Edited)" appears in the header of effects. This is why I can not make any further changes to the image. I open the drop down menu effects and ticked 'restore default presets', but nothing helped. All welcome solutions.

  Make sure that the flow and the density are not set to 0 or another low value. Try setting the two to 100.

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• Cannot add album art in the windows media player 11

  I used to put album art on mp3 manually files with advanced tag editor and I had no problem, but all of a sudden (I won't change anything in the configuration) it stopped, not even a message... When I drag any image of the album (which is not playing), it always creates the folder.jpg and albumartsmall.jpg files but it shows thumbnails of coverage associated with each file, and when I go again to tag editor advanced is as I din't put the lid in it, so it shows the coverage only for the information of the album but not for every song of it and I'd like to see the covers in the solution once again Explorer. I don't have the media player connected to the internet, but this is not the problem... Any suggestions?

  Hi mariana9,

  You can try to rebuild the Windows media player library and check. I suggest you follow the steps mentioned in the article below.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  You can also check the following links for more information:

  Add or edit media information in Windows Media Player

  Information about the media in Windows Media Player: frequently asked questions

  Hope this information is useful.

• Problems with PerfMon - cannot add counters

  Hello everyone.  I registered just to ask this question, which I couldn't find after a long time consult Google.  I come to you in the hope that when Google has failed, you will not!

  I use a program that some of you may be familiar, called Samurize (http://www.samurize.com/modules/news/), who does a lot of things; what I use for most allowed, in a blink of an eye, discern my CPU usage, RAM usage, information network, availability, hard disk space and my schedule on the calendar, among other things.  I know it is an old program and I know that it was designed for Windows 2000/XP, but it worked without a hitch (not including this one) on Vista and Windows 7.

  Recently, however, the ability to monitor CPU, RAM, upload and speed of download and availability has disappeared; all of them give me a flatline, statement I use no internet at all or my computer also (with the exception of availability, which reports that I have been on my computer for 49 days, 17 hours, 2 minutes and 47 seconds... he refuses to go to the top!).  Initially I thought it was a problem with the program.  It is not; It has something to do with Perfmon.  When I load perfmon.exe through the box run, it loads up with an error that says:

  "Cannot add these counters:

  \Memory\Available MB
  \Memory\% committed bytes used
  Defects of \Memory\Cache/s
  Defects of \Memory\Cache/s
  Time to \%Idle \PhysicalDisk (*)
  \PhysicalDisk (*) \Avg disk queue length
  \Network interface (*) \Bytes Total/sec.

  This isn't me accidentally say the same thing twice... it says what I typed on verbatim. [Edit:] Just remembered: other system monitors are perfectly fine.  Of course the Task Manager works well, but gadgets seem to work fine in my use of RAM and CPU, as well as my download balance sheet and download speeds. [/ Edit]

  It's pretty much the sum of my progress on the problem.  I found this page (http://support.microsoft.com/default.aspx/kb/300956), which seems like it might solve the problem... but being a lazy man boned, I hope that there is a simpler solution than that, those who are not "reformat".

  Any other relevant information:

  Windows 7 x 64 professional
  Updated with all official updates
  Recently spent Wi - Fi cable (apart from that, I can't thing of any change that I did with my computer)

  Thanks in advance!

  Hello SensaiOpti,

  I had the same problem. A level that your pointers to the perfmon counters are damaged, you must re-create these with LODCTR from an elevated command prompt:

  Click Start, type cmd click right cmd.exeand select run as administrator.
  At the prompt, type lodctr /r and press ENTER. This allows to repair the pointers (those that are stored in the registry).

  
  C:\Windows\System32>lodctr/r

  Info: Rebuilt successfully setting from system backup store performance counter

  After this action, it is possible that some providers are disabled. You can check the status with lodctr/q.

  C:\Windows\System32>lodctr/q
  Performance counter ID queries [PERFLIB]:
  Based index: 0 x 00000737 (1847)
  Last counter text ID: 0 x 00001560 (5472)
  Last help text ID: 0 x 00001561 (5473)

  [.NET CLR data] Performance counters (activated)
  DLL name: netfxperf.dll
  Open the procedure: OpenPerformanceData
  Collect the procedure: CollectPerformanceData
  Close the procedure: ClosePerformanceData
  First counter ID: 0 x 00001080 (4224)
  Last counter ID: 0x0000108C (4236)
  First help ID: 0 x 00001081 (4225)
  Last help ID: 0x0000108D (4237)
  
  etc.
  
  If she says (disabled) next to a provider, you can activate it with lodctr/e:. Use for the string between the [] at the beginning of the entry.

  Success

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Cannot add new bookmarks.

  I'm using Firefox 34.0.5 and recently discovered that I can not add new bookmarks. A keyboard < Ctrl > d does nothing. If I click on the star to make a bookmark, I see the animation of the star wheel above the bookmark icon and turns blue in the process. But after the animation is completed, the star is colorless and no bookmarks appear in the "do not sort" or any other bookmarks folder.

  I have Firefox "Reset" by the option "restart with modules disabled...". "menu of aid, but has not helped. I do not use any addons "bookmark".

  My PC is running Windows 7 Pro 64 bit. He has 32 GB of memory and a 256GB SSD as drive MBR (C).

  Is there a solution to my problem?

  Hello

  Try to see this help article:

  • Cannot add, change, or bookmark - how to fix

• WNDAP360 / WMS5316 - cannot add AP since the firmware

  Hi we have just updated the firmware on our access points (WNDAP360) 2 and cannot add them in the WMS5316 (ProSafe 16ap)

  I tried to perform a reset, it locates the device, but the progress indicator just to 0% with the rotation of graphics. The Web page times out. Ive left it 40 minutes

  I also manually configured on the same subnet, unused IP and tried to add through discovery of intellectual property

  This seems to have happened since the updates of the firmware:

  WMS5316 is on 2.1.5

  WNDAP360 are on 3.0.4.0

  Beforehand, they were always capricious to add like its never been clear what password to use. For reference, Ive tried our internal password that the group is configured for blank password and password password for example.

  I tried adding with new IPs and also the IP existing / default

  Everything I try, I can't do these Aps to add to the group / management system. Here are the recent errors in the system log:

  7 Oct 09:50:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 09:50:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:52:04 LEYWMS01 syslog.info - MARK-

  7 Oct 09:54:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:54:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed the status of success<0> offline: unable to connect to the server<-3>

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:57:07 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:59:10 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed status connection: unable to connect to the server<-3> to success<0>

  7 Oct 10:02:12 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:02:12 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:03:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 17 seconds

  7 Oct 10:05:17 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 19 seconds

  7 Oct 10:06:16 LEYWMS01 user.warn: WARNING: 192.168.0.100/images/product_logo.gif URL has had 184 seconds

  7 Oct 10:06:16 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:07:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:08 LEYWMS01 user.info: access point [ip:192.168.0.100] [model: WNDAP360] added to list managed

  7 Oct 10:09:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:10:19 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 183 seconds

  7 Oct 10:10:19 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:11:22 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:12:04 LEYWMS01 syslog.info - MARK-

  7 Oct 10:13:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:14:21 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:14:21 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:15:20 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:15:50 LEYWMS01 user.err ap_mgr_WNDAP360: can not deal with CPI since Timeout:Timeout has been reached<-4>

  7 Oct 10:17:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 22 seconds

  Now solved

  Had to manually assign an IP address in the same subnet (which had already been done), and then restart the WMS service, then try and add it again. Connection is established and the progress indicator has increased. Several times he has failed when even at 40%-60% and said the authentication has failed. However he did at least change the IP address to the new so something was working.

  I have left alone and returned to him and he said connected. It seems that the synch plant just constantly but ends by develops. Then I changed the password / group, it says failed again and finally himself developed.

  Garbage

• LaserJet 3390 "cannot add... because it is full.

  We have a LaserJet 3390 AIO printer in our office.  We ran the software on an older dedicated machine of WinXP and we have recently upgraded to W7.  We installed the latest v4 of the printer software that supports Vista and had everythign working for most.  We have well is when we try to push the elements option "scan to".  We used to use it all the time and we could pass changes back all the time.

  Now, however, when we choose and point and try to move above we get this error even if there is no jobs on the printer.

  "Cannot add requested destinations for the all-in-one because it's full."

  We get this error on the network and overUSB to the device.  I also went and haven't tried deactivating and reactivating then the featurewith no luck either.

  I think I've solved my problem.  I came across the "HP LaserJet problem Scan Utility" located in the area of Windows XP and gave it a try under Windows 7.  This fixed the problem I had that I reported.

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• Smartphones blackBerry eception exception: cannot add contacts

  untrapped exception net_rim_bb_addressbook_app (303) does not. the process is completed.

  Always get this error message, cannot add contacts on my phone. Bold 9700 OS6.

  kindly help

  freestyle2580 wrote:

  still can't add contacts on my phone

  This has been a recurring problem for the phones Blackberry OS5 and below. Please click the link below:

  Cannot change or create new contacts to the address book of BlackBerry

  Ron

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Windows app cannot add Australian teams at Sports App

  I noticed that the Sports App cannot add Australian AFL, Cricket and NRL teams to her sport app.  Do you know when this is likely to change?

  a. open the application of Sports.
  b. press the Windows key + Z.
  c. Select the team option Favorite.
  d. follow the onscreen instructions.

  If the above do not submit your request here:

  How to make an application or a Microsoft exam: http://windows.microsoft.com/en-US/windows-8/how-report-app-review-microsoft

• Cannot add attachments in the mail application in windows 8

  Hi, I'm very annoyed since 1 month who can't use the mail application in windows 8 pc. There are many questions that deal with windows products, what is this bloody * windows applications. For each new number one month will be triggered. Here are the following questions do deal with... Please inform me the exact date when they will be fixed. 1. I cannot add the attachment in a mail to the Mail app in my windows PC 8. When I click on "join" link it does not show the popup to select files... 2. I can't see online contacts in messenger app in my windows PC 8. When I click "+" button in messenger app, nothing appears. 3 in all new message is received, if clicked on mail desktop app notification opens properly, but in what is highlighting and displaying recent messages not new messages... When this issue is raised in direct support of Microsoft, support members will be just suggest to raise this issue in the forum. but it is of no use. What are all these questions... you publish patches with tested or not? Kindly update the date when they are fixed... Best regards, Surya

  Hi Renon,

  Root cause found for this problem.
  Actually, it was due to some changes in the key of register, found a solution with the information in the windows forum. Now, it has been resolved.
  Thank you for your answers and advice in the windows forum.
  Kind regards
  Surya

• Failed to add the menu item «Edit adjustment...» "action

  Hello

  I have an action in which I want to change an existing adjustment layer. I can't save the menu item «Edit adjustment...» "in the drop down palette layers.

  To add the step, I tried the following steps:

  1. Select the adjustment layer thumbnail icon
  2. Select «Insert Menu Item»... "in the menu palette flyout
  3. Choose "Edit settings...". "in the menu of the layers palette (how the window insert a Menu item" Menu item: layers: change the setting ")
  4. Press the OK"" button.

  This adds nothing to the action; usually, hit OK adds the menu item.

  I'm doing this right? Is this a known bug? As a solution, can someone point me to action with the step of "Edit settings...". "already in there? Thank you.

  Photoshop CC 2015.1.2 (20160113.r.355 x 64)

  Mac OS X 10.11.3

  I think that you make it harder than it is.  Just record the action and adjust the adjustment layer, you add during the recording of the action.  When did you record the action you should see that there two steps were recorded for the adjustment layer, you added during the recording of the action. "Do adjustment layer" and "current adjustment layer Set.  Insert a stop message with continue after the "make the adjustment layer ' step and check activate the dialog box in step"Set current adjustment layer".»  Layer when allowed by using the action, you can uncheck the walk of the stop.