cannot align STROKE to inside

Similar Questions

• align STROKE inside the corner - Illustrator CC

  I have a curved path, standard angle of 90 degrees.  Illustrator CC is not allowing me to align the line inside the path access/corner.  Inside and outside options are grayed out when this route is selected.

  Of course, I can create a form and then all three alignment of the access road options are usable.  But if I cut a gap in the path of this form, it is instantly to a center-aligned line.  I can create what I need manually.  But it is an addition of times.

  Is this a new problem or not?  I remember not race forward.  Any ideas?

  These options are not available for open paths

• Cisco ezvpn ASAs cannot ping each other inside interfaces

  I have a set ezvpn in place with a 5506 (position B) client-side and a 5520 (location A) server-side. I have successfully connected vpn, and traffic flows. My problem is that I can't SSH in the location b. investigate this more than I can not ping is within the interface of the ASA opposing, or the machines inside each ASA ASA.

  I found the following links that describes a scenario similar to mine, but nothing on one of them helped me.
  http://www.experts-exchange.com/questions/28388142/cannot-ping-ASA-5505-inside-interface-across-VPN.html
  https://www.fir3net.com/firewalls/Cisco/Cisco-ASA-proxy-ARP-gotcha.html
  https://supportforums.Cisco.com/discussion/11755586/Cisco-ASA-VPN-established-cant-ping

  I joined sanitized versions of these two configs. Any help is appreciated.

  Hi Adam

  The site of B I'm not able to see "management of access to inside. Please try to set up the same. He could solve the problem.

  Also on the instruction of the ASA takes place nat can you please try to add keywords 'search non-proxy-arp route'.

  something like:

  nat (inside,outside) source static (Location A)_Networks (Location A)_Networks destination static (location B)-remote_network (location B)-remote_network no-proxy-arp route-lookup

  as I have noted problems with inside access to interface via the VPN when those keywords are not applied. If I remember correctly 8.6.x ASA version had a bug regarding the same. Cordially Véronique

• cannot commit a transaction inside a loop for

  Hello
  
  cannot commit a transaction inside a loop for

  user9093700 wrote:
  Hello

  cannot commit a transaction inside a loop for

  Yes you can engage inside the LOOP.
  You can sink also you into the eye with a sharp pencil,
  but none of the measures has to be EVER be done.

• The tool pen and open objects: only center align STROKE?

  Hey everybody,

  I don't think I've noticed this before.  When you use a stroke on an object obtained via the pen which is not closed all aroundtool, it seems not that you can align the stroke to the inside or the outside.  I found it original.  Anyone know if this is normal behavior?

  Thank you

  Gustavo

  Santa Fe, NM

  Gustavo,

  Yes, it is normal behavior for the stroke made options.

  The reason is that there is no definition of what "inside" and "outside" of an open lane.

  A. the more natural interpretation is the 'internal' is the same region that fills when you apply a fill color to a path open, namely the region who would be on the inside if you were to join the two ends. However, if used during the race, it would cause the race jumped from one side to the other when the path crossed that line of virtual connection (think of a form of S or N), and it is difficult to define the features of the race in the region. Cut out you the race to the area which would be filled or allow you to extend beyond this region?

  B. an alternative interpretation (I think that's the one used by InDesign), is that the 'internal' is always on the same side of the way your trip on it, with the side being chosen as any side is the largest part of the fill area. For straight lines (which there do not have to fill) or for the railways where both parties have to fill areas equal, it should use a tiebreaker as always on the left as you journey starting endpoint, or always right.

  C. another interpretation is to treat 'inside' and 'outside' very freely, so that one of them is reinterpreted to mean the left side (on the way in working order) and the other is interpreted to mean the right side.

  Both interpretations have the advantage of the stroke never did switch from one side to the other, but they have the disadvantage that they do not coincide with the interpretation of the inside/outside used to closed roads, and that's why when you draw along to a new path, the race could change considerably when you close the path, including for intersecting paths such as figure 8. Both interpretations to the latter, B has the advantage that for the paths of the most common such as forms U or L that it coincides with the backfilled area, but the disadvantage that paths which switch the curvature as S & M, change the form of the trace can cause the race suddenly back on which side he is one. C has the compromise in front - the race will be not reverse unless you do something to reverse all the way, but the route of the road side would bear no relationship to the embanked area, which makes the wording 'inside' and 'outside' seems strange.

  It would certainly be possible to capture some interpretations and just go with it, but the one that we were chosen, there kinds of paths where most users would prefer one of the other interpretations. For each option, I am sure many users would interpret the drawbacks to this choice than bugs.

  HOWEVER...

  If you are using CS5, you can use the feature of beautiful features to apply a stroke has 0 width of one side of the track and across the width of the other. This allows you to have unilateral traits on open roads and avoids all the problems and ambiguities that above, since beautiful features address explicitly all UN-centered as traits with a left and a right, whether they are open or closed.

  P.S. I lived in Santa Fe (of Vargas Junior High) in 1967-1968 and Nambe (Pojoaque high) from 1969 to 1972.

• scroll pane cannot align its content

  When a node (Group for example) is added in a scrolling pane, the scroll pane automatically align the node to the left upper corner of the content area of the scroll pane. How can I customize the alignment of the node (Middle center for example) in the scroll pane. When the size of the node is scaling greater than the size of the pane to scroll bar scroll the scroll pane is displayed and if the node size is shrinking, and there the size becomes smaller that the scroll pane is then the node is aligned on the Community Center. It seems do not take effect if I replace layoutChildren method of the scroll pane and set layoutX and one property of the node.
  If anyone can give me some clue?
  Thank you

  ScrollPanes are a bit tricky to use. They line up not happy, you must use layout managers to do or you need to provision yourself with shapes in groups using absolute coordinates or translations. ScrollPane sets there own viewport associated coordinated and you need to provision your content in this window.

  How can I customize the alignment of the node (Middle center for example) in the scroll pane.

  The layoutBoundsInParent of the node, get the viewportBounds of scrollpane and perform the conversion of the node, such as the center of the node is at the center of the viewportBounds (requires a bit of simple math to do this) by adding listeners on each property.

  When the size of the node is scaling greater than the size of the pane to scroll bar scroll the scroll pane is displayed and if the node size is shrinking, and there the size becomes smaller that the scroll pane is then the node is aligned on the Community Center.

  Similar to above, come to work with these properties.

  Not exactly a direct answer to your question, but you can try to play with the code after if you like Saludon. This is something I wrote to learn about JavaFX layoutbounds system. Resizing of the scene and activating / deactivating elements on and outside will allow you to see the scroll pane. View limits listeners show you properties that you are interested in getting the desired effect.

  import javafx.application.Application;
  import javafx.beans.value.*;
  import javafx.event.*;
  import javafx.geometry.Bounds;
  import javafx.scene.Node;
  import javafx.scene.Scene;
  import javafx.scene.control.*;
  import javafx.scene.effect.DropShadow;
  import javafx.scene.layout.*;
  import javafx.scene.layout.VBox;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.*;
  import javafx.stage.Stage;
  
  public class LayoutBoundsScrollableAnchorPane extends Application  {
    // define some controls.
    final ToggleButton stroke    = new ToggleButton("Add Border");
    final ToggleButton effect    = new ToggleButton("Add Effect");
    final ToggleButton translate = new ToggleButton("Translate");
    final ToggleButton rotate    = new ToggleButton("Rotate");
    final ToggleButton scale     = new ToggleButton("Scale");
  
    public static void main(String[] args) { launch(args); }
    @Override public void start(Stage stage) throws Exception {
      // create a square to be acted on by the controls.
      final Rectangle square = new Rectangle(20, 30, 100, 100); //square.setFill(Color.DARKGREEN);
      square.setStyle("-fx-fill: linear-gradient(to right, darkgreen, forestgreen)");
  
      // show the effect of a stroke.
      stroke.setOnAction(new EventHandler() {
        @Override public void handle(ActionEvent actionEvent) {
          if (stroke.isSelected()) {
            square.setStroke(Color.FIREBRICK); square.setStrokeWidth(10); square.setStrokeType(StrokeType.OUTSIDE);
          } else {
            square.setStroke(null); square.setStrokeWidth(0.0); square.setStrokeType(null);
          }
          reportBounds(square);
        }
      });
  
      // show the effect of an effect.
      effect.setOnAction(new EventHandler() {
        @Override public void handle(ActionEvent actionEvent) {
          if (effect.isSelected()) {
            square.setEffect(new DropShadow());
          } else {
            square.setEffect(null);
          }
          reportBounds(square);
        }
      });
  
      // show the effect of a translation.
      translate.setOnAction(new EventHandler() {
        @Override public void handle(ActionEvent actionEvent) {
          if (translate.isSelected()) {
            square.setTranslateX(100);
            square.setTranslateY(60);
          } else {
            square.setTranslateX(0);
            square.setTranslateY(0);
          }
          reportBounds(square);
        }
      });
  
      // show the effect of a rotation.
      rotate.setOnAction(new EventHandler() {
        @Override public void handle(ActionEvent actionEvent) {
          if (rotate.isSelected()) {
            square.setRotate(45);
          } else {
            square.setRotate(0);
          }
          reportBounds(square);
        }
      });
  
      // show the effect of a scale.
      scale.setOnAction(new EventHandler() {
        @Override public void handle(ActionEvent actionEvent) {
          if (scale.isSelected()) {
            square.setScaleX(2);
            square.setScaleY(2);
          } else {
            square.setScaleX(1);
            square.setScaleY(1);
          }
          reportBounds(square);
        }
      });
  
      // layout the scene.
      final AnchorPane anchorPane = new AnchorPane();
      AnchorPane.setTopAnchor(square,  0.0);
      AnchorPane.setLeftAnchor(square, 0.0);
      anchorPane.setStyle("-fx-background-color: cornsilk;");
      anchorPane.getChildren().add(square);
  
      // add a scrollpane and size it's content to fit the pane (if it can).
      final ScrollPane scrollPane = new ScrollPane();
      scrollPane.setContent(anchorPane);
      square.boundsInParentProperty().addListener(new ChangeListener() {
        @Override public void changed(ObservableValue observableValue, Bounds oldBounds, Bounds newBounds) {
          anchorPane.setPrefSize(Math.max(newBounds.getMaxX(), scrollPane.getViewportBounds().getWidth()), Math.max(newBounds.getMaxY(), scrollPane.getViewportBounds().getHeight()));
        }
      });
      scrollPane.viewportBoundsProperty().addListener(
        new ChangeListener() {
        @Override public void changed(ObservableValue observableValue, Bounds oldBounds, Bounds newBounds) {
          anchorPane.setPrefSize(Math.max(square.getBoundsInParent().getMaxX(), newBounds.getWidth()), Math.max(square.getBoundsInParent().getMaxY(), newBounds.getHeight()));
        }
      });
  
      // layout the scene.
      VBox controlPane = new VBox(10);
      controlPane.setStyle("-fx-background-color: linear-gradient(to bottom, gainsboro, silver); -fx-padding: 10;");
      controlPane.getChildren().addAll(
        HBoxBuilder.create().spacing(10).children(stroke, effect).build(),
        HBoxBuilder.create().spacing(10).fillHeight(false).children(translate, rotate, scale).build()
      );
  
      VBox layout = new VBox();
      VBox.setVgrow(scrollPane, Priority.ALWAYS);
      layout.getChildren().addAll(scrollPane, controlPane);
  
      // show the scene.
      final Scene scene = new Scene(layout, 300, 300);
      stage.setScene(scene);
      stage.show();
  
      reportBounds(square);
    }
  
    /** output the squares bounds. */
    private void reportBounds(final Node n) {
      StringBuilder description = new StringBuilder();
      if (stroke.isSelected())       description.append("Stroke 10 : ");
      if (effect.isSelected())       description.append("Dropshadow Effect : ");
      if (translate.isSelected())    description.append("Translated 100, 60 : ");
      if (rotate.isSelected())       description.append("Rotated 45 degrees : ");
      if (scale.isSelected())        description.append("Scale 2 : ");
      if (description.length() == 0) description.append("Unchanged : ");
  
      System.out.println(description.toString());
      System.out.println("Layout Bounds:    " + n.getLayoutBounds());
      System.out.println("Bounds In Local:  " + n.getBoundsInLocal());
      System.out.println("Bounds In Parent: " + n.getBoundsInParent());
      System.out.println();
    }
  }
  

• OfficeJet 8500 A909g cannot align print heads

  OfficeJet 8500 A909g all-in-one.  No printing Cyan or yellow color and try to align the print heads with no luck.

  Help

  I'll take a look at the document below.

  Print quality

  Let me know how it goes.

• Cannot align

  HP Deskjet 2050 J510a series, when I open my HP printer software (click on the desktop icon) I no longer get the options to align the cartridges, etc. All I get is a page of configuration with 3 options for: see Whats Printing, use preferences and Cutomise your printer.

  How can I align the cartridges etc.?

  Hi @Bruze ,

  I see that you have more option of the wizard of the printer to align the cartridges. I can help you with this.

  It seems that the software is corrupt. I will give you with the steps to uninstall and reinstall the printer software.

  Unplug the USB cable.

  Go to start, Control Panel, devices and printers or printers and faxes, highlight any icon in this window.
  Click on file, print server properties, click the driver tab and delete the printer. Then in the window of the printer, do a right click and delete the printer icon.

  Uninstalling the printer software.

  HP Deskjet 2050 all-in-One printer - J510a drivers.

  Test the printer and try to use the printer wizard now to align the cartridges.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Align stroke will not work in Adobe CS 5 Illustator

  Hi, I am trying to align a line around an object that was created using the tool pen in Illustrator.  It is the version of Adobe Creative Suite CS5, using Windows XP on a Dell Inspiron.

  After opening an Illustrator, I created a new file / page of degassing.  A number of anchor points have been created with the pen tool, until they form a star, which is closed without leaving space in the race.  This is so that it can be shated.  I then went in the appearance palette, where I clicked on properties of the race.  Corner and Cap options all work, but when my cursor is at the top of the race to align, cursor turns into a weird icon and I can't do anything with the alignment of the race.

  Google results resulted mainly in people with this problem with text but no clear solution.

  I screen captured the problem on youtube for easy reference.  https://www.youtube.com/watch?v=WSAlU4hqOBc

  Any help with this would be much appreciated.

  It seems that you do not have a closed full path. Select the object and go to Menu > window > Document Info. Use the passage to the menu outside in this Panel to select the submenu object. Now, the Panel displays information of path, how many points and if it is a closed path.

• Forms works not properly, cannot apply STROKE

  I realize, I probably hit a strange key combination that has changed the default behavior of the forms, but I can't understand how to reset the software to the way it normally works. I tried several things, including resetting my workspace and checking the Edit > Preferences.

  What is happening is that if I make a form, it is automatically placed flat on the open layer. I can't select it with the path Selection tool or the direct Selection tool. If I look into the history of things normal appearance tab - for example, I can see that the ellipse tool has been used.

  For this reason, I can't make the settings that I normally would, just like the addition of a stroke. It's very frustrating.

  How can I get forms working again? I use CC v14.2.2 x 64. (I also no longer a range of forms and the property Panel is empty).

  Thank you, Julie

  In the toolbar options make sure you have the Mode value form tool

  
  

  Then your properties panel must show something after using the Ellipse tool

  

• Problems with align STROKE and weight

  Hello world

  It is the problem, can anyone help me please? It does not change the weight of less than 1 point too.

  Thank you very much.

  

  Check in your palette of transformation - uncheck snap to grid of pixels for this object.

  Also make sure that "align new objects to the pixel grid" is unchecked.

• Cannot align objects or paths to guide the intersections with the smart guides (or at all)

  In artificial intelligence, the guides indicate "intersection" when I paint a path or moving an object to align to the intersection of the two guides, when I release the mouse, the object button, I go/design jumps slightly the intersection of planned alignment.  IFIs continue to try to move to align, it jumps to the other side or back to where she was, but Word will correspond to the intersection. What I am doing wrong?

  You gould helped snape to grid and a grid of pixels. If not, keep in mind that the alignment feature is dependent on the zoom level.

  Mylenium

• Cannot slign STROKE outside

  My alignment options are grayed out. Can you tell me what I am doing wrong? The tool using pen...

  The path is closed? Works only with closed paths.

  JET

• Cannot align or align lines and text on the grid

  Captivate 7

  I work with this since nearly two hours and can't seem to align or to align the work of the grid. I want to drag and drop the words in the order: ed's weird and ugly.

  But lines I've done will remain not straight horizontally, and I can't seem to equalize the distance between words. I know how to do easy-peasy in Mac Keynote, but may not know how to get it here in Captivate. Once more, Miss me something obvious. Some advice for me?

  

  To draw a straight line, hold down the SHIFT key. This is going to go right for you.

  To get the same distance between them, select them and click on change, Align, distribute horizontally. You can also align the edges as well to make sure they are straight.

• Align the text inside the text boxes

  Hello
  How can I align a text in the Center within a text input (I'm populating the input text until the page load with values). I tried with "text-align: center" but it did not work.
  
  Thank you
  Rahul

  I tried and it works fine for me

  Make sure you apply it to the contentStyle.