Cannot be displayed on the mobile phone

Similar Questions

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• Impossible to send the file from the PC to the mobile phone Nokia 5230 but able to phone

  HI - how will I can send a file from my Nokia mobile to my PC but not the from my PC to my phone?

  It seems that the PC can find my phone as I can say "Yes or no" on the mobile phone to receive and I choose Yes

  After saying yes to the laptop screen: 'Photo could not be sent.

  I got a new phone after sending my old Nokia 5230 for repair and it used to work with my old Nokia 5230

  Yours by

  To be honest I n don't know why you have this problem.
  I tested it with my laptop LG and it works perfectly.

  Here you can see how I sent the picture to my mobile phone using the Toshiba BT stack.

  It works for you?

• Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

  Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

  The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

  I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

  In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
  Remember that the mobile phone IrDA window is in the right position.

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The event log online help cannot be displayed because the default browser could not be started. Class not registered

  Hello. I live in Brazil, Rio de Janeiro and already installed W8 Pro original Microsoft license.

  When I need to use the event online Help Viewer, a reception this message - the event log online help cannot be displayed because the default browser could not be started.  Class not registered.
  Help, please.
  Thank you
  Carlos.

  Hi Carlos,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that you are not able to access the online help for Event Viewer.

  1. do you receive an error message when you try to open the online help for Event Viewer?
  2. who is the default browser on your computer?

  Method 1:

  
  

  "The event log online help" her will bring you to the following Web page:

  http://www.Microsoft.com/technet/support/ee/ee_basic.aspx

  I suggest you try to access the above mentioned Web page to see if it works.

  Method 2:

  You can see the article mentioned below for how to set Internet Explorer as default browser.

  Make Internet Explorer your default browser

  http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

  Hello.

  When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

  How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

  I tried all the step using the dialog boxes.

  Thank you!

  Hello

  Please use the Windows Vista answers Forum.

  The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

  Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

  1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

  2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

  3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

  4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

  NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

  You can check the link below:

  http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the mobile phone HTC WIFI problem

  Hello

  We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must take a lot of time to get the IP address or IP address cannot be obtained. Is there someone have similar problem?

  Best regards

  Jackson Ku

  Glad to know that it works...

  At first I don't think that the problem was the device but conffigured load balancing...

  Well, since you wanted to have certain amount of units in the network, by AP.  If this limit is reached by the AP, brand-new answer association will respond with code 17 the customer tell "hey dude, im complete, look for a different access point", is the customer later new which either decides if he get another one or continues to try to associate with the access point in the box...

  This feature can be used in order to customers balance the load through towers on a single controller. Customers choose the AP based on the client to report Signal to noise (SNR) in this AP and the window of the load balancing.

  Dynamic balancing works in the link phase. If active and the conditions to balance the load, when a wireless client attempts to join a TOUR, association executives of response are sent to the customer with a package of 802.11 response that includes the code of State 17. This code indicates that the PA is too busy to accept any associations.

  It is the responsibility of the customer to honour, process or ignore this frame of response association with reason code 17. Some clients to ignore it, even if it is part of the 802.11 specification. The standard requires that the client driver must seek another AP to connect to since he receives a 'busy' of the first AP message he's trying. Many customers do not do this and send it to the request of the association. The customer in question is allowed on the network wireless during subsequent attempts to associate.

  The controller sends a response with reason code 17 association frame to the client. If the customer decides to ignore the reason code 17, the customer can try the same AP again and this time the PA allows the customer to complete the association.

  If the customer meets the association 17 response status code, the client then tries to associate with a different access point. For example, if balancing is activated and the window of load balancing is configured as five customers, when a sixth client tries to associate to the AP, the client receives a frame of response of the 802.11 Association with 17, status code that indicates that the AP is busy.

  Here is the link on how it works...

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00809c2fc3.shtml

• Why my animated GIFS not displayed on some mobile phones

  I have created some animated gifs in Fireworks for use on a Bluetooth server.

  One time created, I save it as a png and then drop as an animated gif.

  I then download the gif animated to the server to be transmitted to mobile phones.

  For some reason, certain display gifs and others don't.  I have looked at the size of the file etc, but does not understand why the file appears.

  My colleague has a Nokia mobile and I recently sent two gif files.  The one which is displayed and the other is not.

  They were both of the same size etc, and both had been created and saved in the same way.

  Does anyone have any ideas as to why some animated gif files not displayed.

  I thought it might be the phone, but some files were properly posted.

  Any help would be appreciated.

  Thank you

  Don't you "save under" or "Do you export" in .gif format. The distinction is important.

  'Saving' files recorded with propreitary information of fireworks in the header (including files .gif for some versions). Any file for the Web or for any other use must be "exported".