Cannot compile the project in CVI 2009 which were previously opened in CVI 2010

Similar Questions

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• I can compile the project created in CVI2012 in CVI7?

  Hello

  I have the CVI2012 installed in a computer and I create a simple project to write a digital channel based on the example with DAQmx9.7. In another computer, it is installed CVI7 only, I think that the project includes the sources and headers (text files), I wonder if this project can be compiled in version as CVI7 or not? In the computer where CVI7 installed, I have install all runtimes of CVI2012 and DAQmx 9.7 drivers, but when I open the project in CVI7, it said missing DAQmx.h. So, how can I get these headers and get the project compiled in CVI7? Thank you.

  During the installation of DAQmx it should detect the presence of CVI7 and ask you to install support files.

  Have you checked the library menu? If DAQmx is dimmed, you need to select Customize and check the corresponding box in the new window: if it is checked, it means that the DAQmx support is not installed and you must re-run Setup.

  

  EDIT *.

  I now see in readme DAQmx 9.7 CVI7 in the file is not supported: you need to download a previous version of the driver that supports CVI7.

  NOR-DAQmx 8.8 seems to be the last usable version.

  If you need keep the active project for two CVI machines you will be limited to this version: This means that even when developing in the most recent one you must be sure not to use newer features of DAQmx.

• CS6 flash cannot compile a project work a few days a week old

  When I tried Monday to reopen one of my projects FLA (publish Succesfully on iTunes 2 weeks ago) to add content for a future update, I was unable to generate/compile my project on the laptop I have the code and build it originally. I have the code in FlashDevelop, put all my assets in Flash CS6 and build from the Flash IDE. I put the emphasis on "laptop I have the code originally" because if I take my project on my home office or a colleague's office, no problem, everything is perfectly compilation. A new FLA project created will work smoothly.

  In detail, when I try to test my film 'Export SWF Movie' window briefly appear then disappear. No error is given in the output or any other alert window Panel. But if I try to compile the SWF by going trough mode I get "You cannot debug this SWF, because it does contain any ActionScript" debugging. That error doesn't bring me any solution for me when watching online. I try to build for Flash Player 11.4 up to 9 without change, but sometimes to get the simulator so window build for AIR iOS, but get the same result.

  The only change I noticed on my system is Java Monday made me move to 7. I think I can run Java 6.0.36 before this update. But I'm not sure that Java is at fault because another project run on my computer and my project has been tested on a computer running Java 7 and 6. Also, in my attempt to make this work I uninstall all java on my computer, and note that the new project working, always worked without java. If java is necessary so that the compiler? I also try to add memory to the jvm. ini file since I have a problem with that under CS5.5. No change. Reinstallation of Flash CS6 also has not changed anything.

  Adobe support told me it was a known issue with many other clients, but couldn't give me more information or point me to a discussion forum related to my problem. They told me to contact java or look online for more information. (I'm a bit disappointed by the lack of responsiveness of the support but that's another topic)

  My guess is so... I don't have any guess.

  Technical details of my laptop

  Dell Vostro 3700

  Intel Core i5 to 2.40 GHz

  3 GB RAM

  Windows 7 Home Premium 32 bit

  Windows and all of my adobe products are up-to-date

  My substantive question is what someone found a solution for this. You have the link to share that covers this topic. If its well known as adobe support pretend, is this bug refer to something special other then "Swf can not compile.

  Any advice or tip are welcome. Thank you.

  Just a shot in the water - try to check your paths of construction to the SWC and source code directories. Also, what happens if you move to another directory on this computer and compile it?

• Compile the project into several JDE

  Hello

  I installed JDE 4.7, 5.0 and 6

  4.7 running how can I compile my project in 5.0 and 6.0

  Open the project in the appropriate JDE and compile away.

• [Error] Cannot synchronize the project first Clips to creative cloud

  Hi guys,.

  I tried Sync Clips first to the CC and continue in Premiere Pro.

  Synchronization file or record a video on the CC is not a problem. I see the video file arise. Although I continue to have problems synchronizing a project.

  I have this weird feeling that this is the language barrier. Creation of Clips is in Dutch on my phone while Premiere Pro is English.
  But I can't change the language of the application in English anywhere.

  This is the error message I get:

  

  He translated means something like this:
  
  

  "Oops!"

  Looks like something was wrong and we couldn't send your project to the cloud creative.
  We cannot copy your project to the cloud creative directory. Check your account and try again. »

  Does anyone else have this problem? And is there a solution for this?

  Hoping for an answer.

  See you soon

  Hi Leroy,

  Sorry to hear you were having trouble and thank you for bringing This problem to our attention! Version 1.0.3 of first Clip on Android, now available in the game store, addresses this problem. Please keep us informed if you still cannot complete the workflow for a reason any.

  Thank you

  Bronwyn

• Cannot find the project PTUPGIBDELETE

  Hello
  
  Can someone help me out here... Cannot find this PTUPGIBDELETE project while doing the upgrade of the tools.
  
  
  Thank you.
  
  
  Texas!

  Your first post of this thread, I shouldn't have to know your module and version, and your Peopletools does either, I?
  And what you say, that's exactly what I told you in your other thread:
  Re: PTUPGIBCLONE does not exist during the upgrade

  Your current question dealt with the project, I tried to give the answer above.

  And my blog, you can also read:
  + 16. In the application, as a user of PS Designer, open the PTUPGIBCLONE project and copying a file.

  +(Addendum: if the application You are installing has been built on PeopleTools 8.48 or later Go directly to Step 20) +.
  That means, bypass the stuff on these projects you are looking for.

  Nicolas.

• RoboHelp 2015: Cannot close the project

  I have a project I've been working on since last Friday June 17, 2016. Yesterday afternoon, I could not close the file at the end of the day. I finally had to use the Task Manager to end task for the RoboHelp project. This morning when I opened my project my work seemed to have disappeared, but he was there and I had to import the 'ghost' files back into the project. However, he missed some work. I received an error message when I open the file on the .cpd file is deleted or corrupted, and I wish to import tasks that seemed to be ' % is.

  Today, the project will not close again. I searched the forum for a solution and have not found an answer. Can anyone help?

  I thank you,

  MDawn

  Hello, all,.

  Thank you for your suggestions. I always had the problem, so I called the Support Adobe technique. They were very helpful. Unfortunately, the problem was of my own making. I had, for some strange reason, had used special characters in several topic names. That was the problem. Once we removed the special characters and re-recorded all, the problem has been resolved. We think that there not also useful that I had the name of the project with a long name. We changed that as well. I didn't know the optimal length of name, however.

  Thanks again for your suggestions,

  MDawn

• Cannot save the project to a network, pointing to a Windows Server drive

  Hello

  I have a problem with Adobe Premiere Pro CC 2014.
  Before:

  -Reading / recording on a network, pointing to a Linux server drive: OK

  After:
  -Play on a network, pointing to a Windows Server drive: OK
  -Saving to a network drive a pointing to a Windows Server: KO

  I have this message: ' could not open the project file with write access to the file can you be locked or not may - have permission to write to this location select "save under" in the file menu to save the project for a new... location.

  By browsing your forum, I saw these topics:
  https://forums.Adobe.com/thread/1536340

  https://forums.Adobe.com/thread/1207242

  In summary: Adobe is not designed for networking.
  We are now in 2015. Always the same? Is he a workaround?

  Best regards

  Sébastien

  Is there a solution?

  Adobe anywhere for video

• Cannot change the project status

  Hello

  We have a problem with 4 projects (started with 1, but more than users that the question now), where it is not possible to change the status of a project.

  A user can select the next available status, but when they select the it, nothing happens. They do not see an error message, or anything else - it of just that the State does not change, even if the user has selected a different and valid status in the list.

  I had an SR connected with Oracle since May 20, but Oracle are stuck. They made debugging, tracing, OWC, etc., but no solution so far.

  I just thought that I would ask here in case someone else has experienced this problem.

  Any advice much appreciated.

  Thank you

  Fixed - it turns out it's because the Start Date for the key member of project manager has been after the Start Date of the project. Once this has been fixed, we could change the status of the project.

• frmcmp cannot compile the modules containing SQL code that connected to the database

  Hello

  I checked several hundred messages of the forum on the net without finding a solution.

  I have a Linux server with 11.1 WebLogics (11 GR 1 material) and FormsRuntime installed.

  I am logged in as root.

  I put all the environment variables based on the values in default.env.

  In addition, I updated TERM and ORACLE_TERM vt220. And TNS_ADMIN to the location of the sqlnet.ora and tnsnames.ora.

  I compiled a simple .pll containing only the following code:

  IS test PROCEDURE

  an INTEGER: = 0;

  BEGIN

  a: = 1;

  END;

  command:

  frmcmp_batch module = TESTLIBPLAIN.pll userid=myuser/mypassword@mydb module_type = LIBRARY output_file = TESTLIBPLAIN.plx compile_all = Yes = Yes = No. batch connection

  result: successful compilation. generated .plx.

  now, I'm trying to compile an another .pll containing just the following code:

  IS test PROCEDURE

  an INTEGER: = 0;

  BEGIN

  Select 1 in the doubles.

  END;

  command:

  frmcmp_batch module = TESTLIBSQL.pll userid=myuser/mypassword@mydb module_type = LIBRARY output_file = TESTLIBSQL.plx compile_all = Yes = Yes = No. batch connection

  result: error:

  "

  11 forms (form of the compiler) Version 11.1.1.3.0 (Production)

  Copyright (c) 1982, 2010, Oracle and/or its affiliates.  All rights reserved.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production

  With partitioning, OLAP and Data Mining options

  PL/SQL Version 11.1.0.7.0 (Production)

  Oracle V11.1.1.3.0 - Production procedure generator

  Oracle virtual graphics system Version 11.1.1.3.0 (Production)

  Oracle Multimedia Version 11.1.1.3.0 (Production)

  Oracle tools integration Version 11.1.1.2.0 (Production)

  Common tools Oracle area Version 11.1.1.3.0

  Oracle CORE Production 11.1.0.7.0

  Compile the library TESTLIB.

  Invalidate the body TEST procedure...

  Compilation of body TEST procedure...

  ERROR on line 5, column 1 0

  Ignored SQL statement

  Library TESTLIB closing...

  Errors on TEST:

  PL/SQL ERROR on line 5, column 1 0

  Ignored SQL statement

  Could not generate the library.

  FRM-30312: unable to compile the library.

  "

  the two libraries differ by having used SQl commands or not.

  I tried to compile some more complex .pll and .fmb containg the SQL code. I get similar error messages. The messages that I receive for each module are the same, I would get when compiling the module with FormBuilder 9i (Windows) without being connected to the database.

  So my first thought was, this frmcmp_batch is unable to connect to the database.

  BUT:

  From frmcmp_batch with an invalid user, password, or database name not existing (resp. not in tnsnames.ora), results in appropriate error messages (not found TNS, refusal to sign etc.).

  With myuser/mypassword@mydb I don' t get this kind of messages.

  sqlplus myuser/mypassword@mydb works.

  myuser can access all objects in the database mydb.

  mydb tnsping works.

  When I check v$ session on mydb while (!) frmcmp_batch is running, I see that it is in fact a db session, created from myuser: DB-User = myuser, terminal = myappsever, osuser = root, remote process = frmcmp_batch.  And State of the current session of the db is ACTIVE.

  As a result, frmcmp_batch fails with error messages that I expect that when there is no connection to the base, if it is connected!

  Any ideas what could be wrong with my setup?

  Help appreciated.

  Jean

  I found the solution. Seems, fmrcmp 11g can connect to, but compiles not on the 9i database. With the help of a Database 11 g resolves the problem :-)

• Cannot find the project in the form of project serch

  Hi all
  
  In the search screen, I can't find any project that created after h24:mi:ss. dd/mm/yyyy (see message below).
  
  Message:
  =====================================================================
  To benefit from the research above, the project must have been created or updated before: 08/01/2011 13:28:55
  =====================================================================
  
  How can I update the current data for the research?
  
  Thank you.

  Run the simultaneous program (ADM: rebuild indexes of project search Intermedia), and then try again.

  In 11.5.10 you must run the program above to search for projects through the PJT search screen.

  Thank you
  Govind

• Cannot build the project to burn. Error message

  Hi guys

  New to CS4. Used the first several years ago, went through to Final Cut Pro and just moved backe to Adobe CS4.

  The problem I have is that I did the project in again and all the links are fine, but when I click on the build, after 5 seconds of her building, I get the error message "the SOFTWARE INTERNAL ERROR:.\Vobulator\TitlePlanner\CVOBUPlanner.cpp,line 332.

  Does anyone know how to fix this?

  I appreciate any suggestions.

  If you search the forum by using the keyword "vobulator", you will get some

  ideas on how to solve this problem.  I hope that one of them will work for you.

  -Jeff

• Cannot close the first with other (LH one end) tab open are closed.

  Cannot close the first tab (end of LH we) but others are closing. Indicator download on tab keeps indefinitely - running windows under all the tabs are functioning normally.
  Open another copy of Firefox allows all tabs to work normally in this copy

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

• Everything began with previews of history. Cannot create the project

  After watching the introduction video of Karl it sounded so easy to create a new project, load the demo Bayward son, but on my Mac I cannot just create a new project. The dialog opens very well and I can enter a project name, but clicking on the button create does nothing and the dialogue just sits there. Is happening exactly the same thing in online and offline modes. Any ideas?

  Weird.

  I just tried this morning and it worked. I tried at 8:20 AM PST.

  Can try again you it?

  -Anubhav