Cannot complete installation of recovery disc HARD on my Satellite L450

Hi guys

I'm busy doing an out of the box boot, all is well until there, copy F to V hddrecovery its impasse on 1-7. What can I do?

Been up to 3 hours now, I can do the loan all deleted all the data, how long should I leave in its current state, thank you

Hello

I'm afraid that something was wrong during the process of recovery of m.
I think you can try to repeat once more. Maybe it would work. In the case of the disk HARD recovery isn't possible, you will need to retrieve the laptop using recovery media.

Do you have created disk recovery or recovery USB flash memory stick in the past?

Tags: Toshiba

Similar Questions

  • Problem recovery disc HARD on the Satellite C660

    My apologies if this is the wrong sub-forum:

    The fool that I am, I changed my WIndows login and password since I use very long passwords, I don't know what I changed it to. Guessing is out of the question.

    So I turned on my computer laptop while holding the key 0, what brought me to the Windows Boot Manager screen. I pressed F8 on Windows 7 for advanced options and opted for "Recovery Mode", as I've used in the past to install the operating system from scratch.

    It asks me to select a keyboard layout, and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.

    Any advice on what I can do?

    Thank you

    > It asks me to select a keyboard layout and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.
    On this step, you must enter your login name and login password of Windows. Without correct password, you will not be able to start the installation of HARD drive recovery.

    There is option to install the recovery image. You can do so now using recovery DVDs. You have created using the preinstalled Toshiba recovery disc creator?

  • Cannot boot from OS recovery Disc - hard drive again

    Hello.

    I had some problems with my computer for a while.  This week it stopped starting up, so I ran diagnostics from the utility partition, and it seemed pretty clearly indicate that the hard drive had a few significant flaws.  This was not unexpected, and I have all my data backed up on an external drive, so I bought a new hard drive.

    The problem I'm having now is that my system does not recognize my operating system recovery disk.

    I made sure my CD player is set as a first priority and tried to force it in the start menu, but it is on a black background with a blinking cursor, or says "No Boot Device available"

    I tried the drive in another computer, and I can read here very well.

    I ordered a replacement from Dell recovery disk, but I don't know if there is anything else I should try.

    Any help is appreciated.

    Yes, if the reader is made bootable.  See here:

    www.computerhope.com/.../ch001366.htm

  • Re: Could not start recovery disc HARD on my Satellite U840

    Hello

    Would appreciate any help on the issue. My operationg system going nuts and I want it back using the toshiba HDD reserved sector Recovery Wizard. Followed the instructions http://aps2.toshiba-tro.de/kb0/HTD1303440001R01RU.htm and called for the wizard, but the next screen that appears is "Please insert disc 1 and click the next button.

    No other options or guests. The Lalonde is almost brand new and I have not and recovery points again. Laptop has any optical drive either.

    What could be the problem and how to restore windows from the hard drive of State out-of-box?
    Thank you.

    Stand by. I put t understand exactly what is happening.
    Can you please provide a detailed description (step by step) what is happening exactly?

    When the system recovery options menu is shown is the Toshiba HDD Recovery option here? What happens when you click on this option?

  • Satellite A200-1XO - recovery disc HARD No. pressing F8 option

    Hello

    I need to reset my computer.
    When I press f8, I don't have the recovery disc hard choice. Is this normal? How should I do?

    In Disk Manager, I can see the eisa partition, I have no dvd either...

    Help...

    Hello

    It looks like a folder of image no longer available on your computer hard drive. You can

    1. order a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba
    2 get Windows copy the installation disc, all the drivers are on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  • Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

    Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

    Try this:

  • Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

    Windows 7 cannot complete installation, halfway, it stops and gives me the message

    "windows Setup could not configure windows to run on a hardware on this computer.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • Cannot start my TOSHIBA Recovery Disc Creator

    I have laptop Satellite A300-148
    Since I bought I tried to create a recovery disk to format my laptop, but every time I try to open 'TOSHIBA Recovery Disc Creator' this message appears on my face:
    ERROR: "(5) to C:\Program Toshiba Toshiba Recovery Disc Creator\Setenv.ini were denied access."
    What should I do?

    Hello

    I don't know what the problem is here, but the only thing you can try is to install the operating system with recovery image in the hope after the new installation of OS, that this tool will not work correctly.

    The recovery image is recorded on the second partition of HARD drive and to start the recovery installation press F8 after starting your laptop. In advanced startup options, select the first option to fix my computer. When the system recovery options are shown, please choose the last option in recovery Toshiba. After doing this just follow the on-screen menu.

    When the operating system is installed, try using Toshiba Recovery Disc Creator. I recommend you use high quality DVD-R media.

  • Cannot start Toshiba Recovery Disc Creator on my Satellite A300 - 15K

    Hello! I'm of the Poland if my English is a bit poor... (but I hope that's enough)

    My problem:

    I don't have a recovery (DVD) drive because I use earlier Recobery of Toshiba Disc Creator (when everything in my laptop was good).

    Now, I didn't make this record because when I run Toshiba Recovery disc Creator I have an error:

    "EWC program launch and create for DRC Recovery partition _przestaa INI files? Dziaa? ndmam§a? (has stopped working) _

    Error details:
    Zdarzenia problemu name: APPCRASH
    Name aplikacji: TRORDCLauncher.exe
    Wersja aplikacji: 1.0.0.1
    Aplikacji czasowa Sygnatura: 4682674e
    Name Modua? u z Ba? ? Dem: WIMGAPI. DLL
    Wersja Modua? u z Ba? ? Dem: 6.0.6001.18000
    Sygnatura czasowa Modua? u z Ba? ? Dem: 4791a7a6
    Kod Wyja? tku: c0000135
    Przesunia? Wyja cie? tku: 00009cac
    Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
    Identyfikator Ustawiea? z: 1045
    Information 3.Dodatkowe 1: 9 day 13
    3.dodatkowe information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
    3.dodatkowe information 3: 9 day 13
    3.dodatkowe information 4: 1abee00edb3fc1158f9ad6f44f0f6be8

    Read our przypadku PBN Poufnoa? This informacji:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0415

    "

    Hello

    Have you changed anything on your laptop?
    I mean if your HARD drive recovery partition has been changed or the data partition thin o has been removed?

    To be honest, for me, it looks like the issue of the BONE. I think that it s not a question of simple tool, but I think that the operating system was confused

    Maybe you should try to recover the laptop using Toshiba HDD recovery and after the new installation of operating system on your laptop, you can try to create the recovery disk again.

    To start the recovery, you must press the F8 key immediately after the laptop has been powered. Then, you choose the first option called fix my computer.
    This would lead to a new window and there, you could choose Toshiba HDD recovery.

    But note; This recovery would format the whole HARD drive then perhaps you need to back up data before you start this procedure.

  • Cannot complete installation of Windows 7 OEM on Precision T3400

    Can someone help me?

    I try to do a clean install on a Dell Precision T3400 with Windows 7 64 Bit OEM, but cannot complete the sequence.

    It goes through the sequence of the whole installation, restart a couple of times. He gets in the beginning of the sequence as "complete installation" - contribute to what, according to me, it's the final reboot - and then crashes. I think that what should come next is the bit where to enter information first name of computer use - time, date, place - time etc. I never get that much, however.

    I have not updated the BIOS. Previously Windows Vista - but the disk has been deleted - not sure if I can update the BIOS in this State.

    Another thing - I swapped the graphics card. The monitor of works well during the initial installation sequence.

    Any suggestions?

    Thanks a lot for reading.

    The suggestion above about SATA drives didn't really solve my problem, but it got me thinking in the right direction.

    Here's what I've learned about this through the answer and the answers on other forums above. It turns out be a common problem:

    It is usually caused by the lack of drivers for devices that are connected to the computer. Devices can include: any type of USB device (may be same mouse or keyboard), any type of hard disk, graphics cards and other types of cards such as PCI or PCIe Firewire. If you have a SCSI card then remove it permanently.

    I had a Dell keyboard with built in USB ports and a Media Player control. I swapped it for a simple vanilla ordinary keyboard.

    I also already swapped the graphics card that came installed on the T3400 for an older NVidia Quadro card as a fix for compatibility with my older monitors SVGA adapter.  When I searched on the NVIDIA site, I discovered that there is no Windows 7 driver for my graphics card, so I bought a DVI - I adapter that I needed the original card and replace.

    My problem turned out to be the graphics card.

    On other forums I have seen people solve the problem by removing the USB devices all THE. If you have a keyboard and a USB mouse, this may seem to be a problem. However, once you have initialized the windows 7 install process you can remove the keyboard and the mouse. Whenever the computer reboots it page and warn that any input device is fixed, but after a short pause, he must continue with the installation procedure. In my case, the fancy USB keyboard was certainly a problem too. Disconnected after initialization of the installation allowed the installation of two additional steps.

    I curse me Microsoft about this problem, but to be honest, I was not able to run a compatibility test of windows 7 on my computer. I bought it on ebay without an operating system. If I could perhaps it would have marked the graphics card problem and composite USB keyboard device.

    Don't know if it will work, but if you can't figure out what your driver problem, you can be able to run a hardware compatibility test and periperhals by a temporary installation of Ubuntu and connect it to the Net. I had no problem to boot Ubuntu from a USB key and the connection to the network.  It works perfectly first time without any of the usual shenanigans of Microsoft. In my opinion, Ubuntu is an operating system much higher with a much nicer user experience. My only reason to stick with Microsoft's older software. It's highly unlikely that I will ever consider buying a new system from Microsoft again. They lose the pedals after XP.

    Good luck

  • Satellite L750 - if I use the recovery disc HARD Will this work?

    Guy Alrights

    I have a L750 machine that gives me problems at the moment, so I'm going back to Strath, as when I brought brand new... So I wonder if I use HARD drive recovery which will be re install windows and all the drivers and all the pre install software? Or what will be installed?

    Hello

    HARD drive recovery would fix the laptop back to factory settings.
    Recovery of HARD drive installs the image of Toshiba. Toshiba is a package that contains the system Windows, drivers and tools and utilities.

    But I read the other thread you created here, and it seems you did a clean installation
    In this case the HARD disk recovery would not work more :(

  • Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

    I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

    Hello

    You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
    will have need a HDCP compatible graphics card and a TV/monitor taking support this
    as well.
    The kit Hauppage offers is substantially the same as I told you.

    clear QAM availability varies according to the cable company. most begin to encrypt
    everything.

    > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

    http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

  • Display driver cannot complete installation on Qosmio G30-137

    I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
    Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

    Hello

    Have you installed the Windows from the original CD of Microsoft?
    Why you suggest that the graphics driver has a malfunction?

    I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

    In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

  • I lost the recovery disc for my laptop Satellite C

    I am not very computer - I can not enter my laptop Toshiba Satellite C. I had written my password, but it is not accepted and I lost my recovery disc.

    Can someone please tell me what to do?

    You may have problem with Windows password or BIOS password?

    In any case, if you want to install Windows again using HARD drive recovery option you Windows password, so you will not be able to install Windows again.

    Can you please tell us which model of laptop you have exactly?
    What is a portable model older or newer?

  • No recovery disc supplied with my Satellite P300

    I recently bought a new laptop from Toshiba, Satellite P300. It has Vista installed out of the box, but there is no recovery media supplied with the package. I'm afraid that if something can go wrong in the future, I will not be able to repair my operating system.

    Two questions:
    (1) is this normal that there is no restore disk provided with the Satellite P300? In other words, other customers who bought the same laptop doesn't have that either. Or is it an exception and an error in my local provider. In the manual on the "included in this package" list is any mention of a recovery disc supplied with the package.

    (2) can I get a Toshiba Recovery disk if something is wrong?

    Hello

    > Is it normal that there is no restore disk provided with the Satellite P300?
    Yes, because the laptop was equipped with HARD drive recovery option that allows to recover the laptop from the HARD drive.

    > Can I get a Toshiba Recovery disk if something is wrong?
    There are some pre-installed Toshiba Recovery disc creator software.
    This software creates a Toshiba Recovery DVD. I think that this info was published in the user manual which must be preinstalled on your laptop.

    So, I strongly recommend reading the user manual and to create this DVD of recovery before you change anything on the laptop.

    Cheers mate

Maybe you are looking for