Cannot configure USB2 on Satellite Pro A10

Similar Questions

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• Satellite Pro A10 - but cannot work on what model it is?

  Hi, I am a beginner, but hey!

  I have an old, very old, but perfectly functional Toshiba Satellite Pro. It was purchased in October 2003. On the underside, he says it is a "Satellite Pro A10", but we can also read on the part number that reads 'PSA15E-02VPC-EN.

  What is an A10 or A15. As ever, it's what model is it, when I visit the download page online for pilots, there re a number of different models, I can't work on which it is my pc?

  There are eleven models A10 A10-S100 to A10-S178 and eight models A15-A15-S127 to A15-S1692.

  So this could be one of the 19 models? Any help much appreciated.

  P.S. I have formatted the hard drive, installed a clean copy of Windows XP, so now I need drivers.

  Hello

  According to your post, you have a series of Satellite Pro A10 PSA15E

  The drivers are located on the page of the European driver Toshiba;
  http://EU.computers.Toshiba-Europe.com

  But the laptop is old, then you must check the box Archive to get the drivers for this series. In product type choose Archive simple and then point to Satellite Pro A10 PSA15E ;)

• Satellite Pro A10 display and DVD issues

  I have a Satellite Pro A10 about 2 1/2 years and have never had a problem with him, but the other day when I tried to watch a DVD, look at a program (InterActual Player) opened as usual and then a few more seconds later the display will change in very low resolution (something like 14 colors, almost a negative and all image was massive Although I don't remember the actual numbers) and he said that I had to reboot in order to return things to normal. I tried the same DVD in Windows Media Player, as well as to try other DVDs and initially that the DVD would play in Media Player but not Interactual but now the same thing happens any DVD or player that I use.

  Also, I went on the computer this morning and got a message saying that the battery is low (although it was because I had not plugged the computer again, nothing to do with the last errors) and the computer is in standby. I plugged in the computer and you press the power button to wake the screen is very dark but visibly pixelated (I think that's the word, he had visible points, as if someone were holding a magnifying glass up to her) and got very slowly brighter until there has been a series of narrow bright stripes, like a giant pixel or a tv test screen.
  This could be a problem with the display drivers (even though I tried to update and we found since I always see a message 'Cannot find the requested string' by the icon for display in the control panel), the screen itself, or something else entirely?

  Sorry it's so long, but I thought it is best to include all the details in case it has been important. I hope someone can help!

  Hello Nicola

  As you know on this path is not easy to say what may be the problem. In my opinion, it is important to see what is happening exactly. I assume that your problem is not caused by the display driver. Try to properly test and notice where the screen is very dark.

  If this problem is repeated again and again that I recommend you backup your data and reinstall the unit with recovery media. On this path of unity will be factory configured and you can see if the problem still occurs. If so, it may be just caused by a malfunction of the equipment.

  Good luck!

• Satellite Pro A10 PSA15e - no more wireless Chip

  Hi all, I'm new to the forum so please be gentle with me!

  I was recently given a Toshiba Satellite Pro A10 (PSA15e-01PJY-EN), unfortunately I did not to any recovery disks! (if someone could send me a copy of the diskette of recovery for this machine, I'd be over the Moon!)

  However, I recently tried to install windows xp home with the disc and used the key on the bottom of the laptop.
  Installation ran ok, but all of a sudden, he cannot see the port intel LAN.

  I ran the likes of Belarc, Device Manager and AIDA... all of a sudden since formatting, nothing can detect the WiFi chip, is this a problem with the fact that I do not use the recovery discs?

  I've not disabled in the BIOS, nor can I actually see it in the BIOS.

  Someone at - it suggestions?

  Thank you very much

  J

  When you install the operating system using Microsoft facilities CD you naked of OS and you must install drivers for each component material, including the wireless network card.

  All drivers and Toshiba tools that you can download at Toshiba support and download page.
  I think that you will also find the document entitled instructions for Installations. You'll find order exact facilities. Following this command, you can perfectly configure and install everything on your laptop.

  Please visit http://eu.computers.toshiba-europe.com
  All that you can find in the archives.

  If you need help more on this topic please let us know.

• Satellite Pro A10 HDD

  I have the Satellite Pro A10 C2.2GHz/XP Home/256 MB/20 GB/14TFT/DVD/WiFi. One day, the computer just froze and then resets and would not start again, and I kept getting the message:

  «PXE - E61: MEDIA TEST FAILURE, CHECK CABLE.» PXE - M0F: EXIT INTEL BOOT AGENT. "INSERT SYSTEM DISK IN.

  or

  'A DISK READ ERROR OCCURRED '.

  I tried some hard disk controllers, but they are unable to get anywhere, because they cannot access the drive. Anyone know of any solution to this, or if not, where would be the best place for replacement because my warranty has run out.

  Any help appreciated,

  Thank you
  Tom

  Hi John,.

  Unfortunately, it seems that if your HARD drive has crashed. The message of your BIOS is normally what you see if the PC cannot detect any bootable devices. Usually, it is a bootable HARD drive.

  Assuming you have the Toshiba Recovery CD you could try to restore your existing system to your HDD (it will automatically reformat the hard disk first), but you might find although it will simply fail restore due to the failure of the drive.

  Your next option is to replace the HARD drive. You can do it yourself very easily, or you may prefer to take the laptop to a Service Agent for them to do. Note that you still need to rebuild your system from the recovery CD according to your choice.

  Given that your device has a 20 GB HARD drive standard you could take this opportunity to install a larger capacity drive.

  HTH

• Satellite Pro A10, cutting

  My satellite pro a10 guard stop instantly and I cannot find a reason why...
  I have service pack installed two

  Hello

  It starts after installation of SP2 or an earlier version? Is if the processor works under full power?

  Here in the user forum, you can find a lot of discussion on this topic. If you want you can check by using the advanced search.

• Satellite Pro A10 - IDE 1 # error at startup to the top

  HI, I have a Satellite pro A10 and everything is working very well in recent years to date.
  A few days ago I started having a cd read error / invalid dvd disc format still drives fine on all the other PCs work.

  Today as I get #1 error on boot up IDE... the laptop is always standard when I got off the shelf. thinking the drive might be dead due to wear I replaced the drive with a drive to work and I still get the same error. I removed the completely STRANGE and yet to come.

  I also updated the usb floppy bios that has been a success. and the best part of all this. the dvd - rom supplied with the laptop works fine in my other a10 tosh!

  Someone at - it ideas. I really need to replace the motherboard if I can help it. This is the only problem with the laptop.

  THX in advance people.

  Hello James

  IDE 1 # error is typical when ODD is not accepted by the system. The reason may be defective drive or the use of non-compliant readers. The fact is that each player can not be used with all portable models because of the allocation of the different pins.

  In your case, it is really strange that the work by car on other A10 but not on this one. Because of this, I presume that there may be a problem with connectors. I'm afraid there is not much to do. You can try to check out them and see if they are clean and not oxidized.

  Sorry, but we cannot speculate what may be the problem but, as you know, only intensive test may give you more answers.

  Good luck and let us know if you will find what is the problem of resources.

• Satellite Pro A10 does not start (HARD drive seems to be missing)

  Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
  Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
  is - that say I have:
  1 a hard drive damaged
  2. defective connections on the HARD drive? -If Yes, how I fix that?

  the system didn't crash before it happened, she doesn't have to load up when I started it.
  Would appreciate any help.

  Thank you
  SCL

  Hello

  Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
  If it possible s so I suggest you of to completely format the HARD drive.
  Then try to start the recovery procedure.

  However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop

• Satellite Pro A10: DVD rom sd c2612 stopped reading discs completely

  OK, I have a Satellite Pro A10, recently it is just stopped reading discs completely! Ive got no idea what wrong with and do not know if you need to replace? I prefer not too.

  If anyone has any advice on repairing it I would appreciate it. If not if anyone knows if there any compatible DVD readers writing? also the best place to buy?

  Help, please!

  Hello

  This does not sound well :( I think it could be a hardware problem maybe something wrong with the lens of the drive
  Anyway, usually it of not possible to fix these issues or it s not worth repairing, because the costs are too high
  Thus, it seems that you need to replace. But be careful. Not all readers are compatible because different master/slave/c-salt settings.
  I would recommend so contact the ASP in your country to get a compatible drive.

  But please try this proposal;
  Sometimes, the Player cannot read the Middle due to the incorrect registry key.
  Remove the upper and lower filter filter in this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the laptop. Maybe it helps

  Good luck

• Can not start my Satellite Pro A10

  I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

  Start:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last known good configuration
  etc.

  None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

  multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

  I can't clear the checkpoint.

  Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

  Any suggestions?

  See you soon

  HI Leon,

  It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
  A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

  The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

  Kind regards

• Help wireless with a necessary Satellite Pro A10

  Hello I just bought a Toshiba Satellite pro A10 psa15e-03u82-en of second hand and I'm having trouble with the wireless option. This computer is equipped with a built-in wireless card?
  The light on the switch doesn't switch on when on is selected and there is no wireless option in Device Manager.
  But if you go to the support page for driver download at the web site of Toshiba drivers for wireless utilities!
  Is the map or can it be mounted under a removable hatch on the base of the laptop?
  Any help will be greatly appreciated a lot

  Hello

  the problem is that wireless is delivered optionally with this machine. This means that the machine does MUST NOT have wireless but can be equipped or bought with the wireless option added.

  You can only do the following: you can get a mini-pci wireless card (I suggest atheros, gently work cards in almost all machines) or you take the PCMCIA wireless card, so Don t you have nothing to install ON your machine.

  In the case of a mini-pci card, you can improve your machine by removing a cover on the bottom (should be more on the front of the machine) and then put the card carefully into the slot. And CAREFULLY stick antenna that plugs into the connectors on the Board. They cable cannot be repaired if you damage one of them.

  It would be better to look for a technician and allow it to install the card. I think it should be much safer. ;)

  Welcome them

• Satellite Pro A10 - where to find the drivers

  Hello

  I have an A10 Pro Satellite I am trying to set up for a Christmas gift for my daughter, but I'm unable to do to go on line.

  I was told that I need the drivers for it.
  I was looking at this forum and I went to the download page mentioned in the discussions I've read.

  I tried to fill in the form to identify the drivers I need, but I was not able to find the good ones, as I can't find the model in the menu drop down it returns a lot of possible drivers. I downloaded a few of them on a flash drive and tried to download on the Toshiba laptop, but with no joy.

  Please can someone help me identify the correct drivers that I need to help me configure the laptop?
  Sorry to be so dence but his father and I don't know anything to do a laptop internet ready.

  Bio

  Hello

  The drivers for this laptop are on the European driver Toshiba page.
  This book belongs to a series of older and so you can find the drivers in the area of the ARCHIVE.

  Check this box:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> download drivers

  Here, you have to choose:
  Archive-> Satellite Pro-> A-> Satellite Pro A10 Satellite Pro

  You can connect this laptop to the router using the LAN port.

  I m not very well if you'll be able to connect the laptop to the router using the WiFi because that card WLan was optional on this laptop and possibly there is no WLan card.

  If you want to check if the wireless card is installed, then you should check the device-> maps network manager
  LAN and WLan card must be registered.

  Good bye