Cannot connect G585 to the second screen (HD TV)

Similar Questions

• Satellite P50t-B01E - BD Player does not play using the second screen

  Using PC mode "extend", dragging player across the second screen causes reader Toshiba BR disable playback of the disc. The drive interface moves on, but the game is not possible.

  Other media and the information can be consulted. Connecting via HDMI.

  Thanks in advance.

  I guess you will be able to use the player Blu-switching the video output for external monitor without the use of the extended mode.

  Could you confirm this?

• set the second screen as the main screen

  I have an external monitor connected to my macbook pro. Is it possible to put this external monitor as the main screen. It seems that El Captain only opens new windows and applications on Macbook Pro screen.

  You can change the order via system preferences > display > Arrangement. Drag the white line (menubar) on the second screen to make it primary.

• Y510P image does not fit into the second screen using HDMI

  Hi, I have the Y510P with Windos 8.1 latest graphic drivers. I am connect to my HDTV via HDMI and the image fits well in my TV and it has a little zoomed. I was looking for a solution in all the menus of Intel HD 4600, nVIDIA Control Panel, Windows scaling... Nothing works. I have another laptop and it has an option that is changing the image and the TV shows that what is supposed to be for show.

  How can I solve this and did what I see in the screen of my laptop on the second screen (TV)?

  Thank you!

  I have a 1280 x 720 Samsung TV, I don't know the model exactly.

  The probem disappear when you change your screen resolution, or change the size of the elements, or something like that. It has something to do with the Panel of Intel, where there is a scaling option, in the tab 'display '. Well, there should be an option to select the scale, but it is not.

  So, to make it appear, you need to do this:

  1. connect the HDMI

  2 desktop, right-click, screen resolution, in 'View', you must select your TV, in my case "Samsung TV"

  3. you change the resolution from 1080 to 720

  4. then select Samsung TV as output ONLY screen, so the screen of the laptop turns off

  5. go in Control Panel (right click, graphics properties... office, display) Intel

  6. NOW, in the scaling box, you can move the 2 sliders and adjust the image, so now I can make it adapt to the screen

  Although it is a solution, and everything works fine, I don't like. I should be able to look at the screen of my laptop, and the most annoying is that steps 1 to 5 are reset every time you unplug the HDMI. It is a temporary solution.

  I want my nVIDIA GT 755 M to take control of the HDMI, I think that I could just plug the HDMI then automatically shows properly scaling the picture of my TV. Just plug and unplug, like all my other computers.

  Thanks for the help and hope I can find a real solution.

• losing audio after adding the second screen

  Why am I losing my sound after having added the second screen (sony sdm-hs95)?

  My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

  • • Windows 8.1 64 Pro
  • • 4th generation Intel® Core™ i7-4800MQ processor
  • • Included 2-year warranty
  • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
  • • 8GB DDR3 System Memory (2 Dimm)
  • • 2 TB 5400 RPM hard drive
  • • 24GB flash acceleration Cache hard drive
  • • Two batteries of Lithium-Ion 6-cell
  • • Blu - ray player & SuperMulti DVD burner
  • Backlit keyboard •
  • • HP TrueVision Webcam high definition with digital microphone built-in
  • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

  Thank you

  Hello

  How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices

  Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off

  Kind regards.

• HOWTO define the second screen?

  Hello

  I have a Setup to monitor tripple (a Samsung for coding, the iMac 27 "non-retine and a screen 24" Apple Led Cinema-> in that order). Lightroom choose the Samsung as the second screen, but I want the Apple Cinema (the display on the right side of my iMac which is my primary monitor). I am able to move the window manually to use this form, but the second is still the Samsung.

  So, what can I do to change permanently the second screen?

  Thanks for the tips and tricks

  Abhijit

  It is a question unresolved, which was for the first time five years ago: Lightroom: ability to assign a second monitor with more than 3 monitors. Photoshop family customer community you can read some of the posts with solutions on the link above and see if one of them solves your problem.

  The only other suggestion I can give you is to try swapping the crush of ports used for Apple Cinema and Samsung monitors. Connect the cable of Samsung display in the Thunderbolt port, used by the Apple Cinema and vice versa for the Apple Cinema cable for display. Logically, this should exchange the display that receives the secondary window of LR, but I have not seen anyone offer it as a solution. Unfortunately, I don't own an iMac so he can't test me.

• Three-Way Color Corrector eyedropper tool works only on the second screen in OSX Maverick

  Hello

  Since the update to the Mavericks at work on Monday, I was unable to use the eyedropper tool to the three way color corrector on a dual monitor configuration in first Pro CC.

  I have all of my panels, outside of my program monitor Panel, on a screen. When I select the Eyedropper to the three way color corrector white balance and go to the second screen where my program Panel is, he turns his back on an arrow and I cannot select anything. When I move my Panel program to display as well as others it allows me to use it as usual. Unfortunately, this is not how I work and I would like that the program works normally.

  I was wondering if anyone else has had this problem and found a solution. I will report to bug right now.

  Thank you.

  Hi Punker,

  Thanks for posting the workaround. It is a known issue that we're investigating. FOW now workaround is to:

  GoTo > System Preferences > Mission Control.

  Uncheck "screens have a separate space.

  System disconnection or re - start.

  The problems must be solved.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Composite of reading on the second screen in multicam on the first screen?

  Hello

  What I try to do is:

  (maybe the screenshot will help you understand)

  I have a sequence with two cameras connected to each other and another third camera which must be always visible on the screen (a sort of picture of image).

  So my I want to see the sequence of cam multi my first screen and playback of composite on the second screen.

  In fact, I can get it, but the third video is only show on the composite when paused (not during playback). IE a select a frame in the timeline manually third camera appears in the second screen), I play the video the third camera disappear from the second screen...

  This is the normal behavior?

  Is it possible to get the result I want?

  So my main screen on my second screen right left. (on the right you can see the camera with nexus, not the screen green screen).

  On my main screen I have the monitro multicam where I do not see my third camera, but is not a problem.

  

  When I push the game I got it (see the black line on the left of the second camera third screen appearing do not).

  

  Thank you in advance for your help!

  PS: I saw a few posts with reference monitor, I try this but apparently not reading at the same time as the multicam so not what I want.

  It does not exist.  MultiCam can only show you the cameras in the multicam sequence.

  You could add the third camera in the sequence multicam temporarily, then cut between the two other cameras, and when this is done, remove the third camera...

• Satellite M30X-129 - no video on the second screen

  I have a M30X-129, which for the most part works fine. However, when I have a second monitor attached (for example, an overhead projector) everything is displayed outside a video/film clip, which appears black. This occurs if Windows Media Player or Realplayer is used. All other programs and images are visible on the external monitor or laptop screen.

  I installed Windows XP Pro on the orig XP Home version. All drivers were installed and updated as required. I thnk I have a Raedon graphics card.
  Any ideas on how to have movies/clips on the second screen?

  Thank you.

  Hello

  Most Windows applications and video cards do not support playback of video files on the screens at the same time. You can try to disable the video signal going to the built in LCD screen and display only through the projector.

• How to get the film on the second screen and cut on normal?

  How to get the film on the second screen and cut on normal?

  iMovie 10 does not support using double screen, tou need to FCP to do.

  Geoff.

• How to push the second screen?

  Hello

  I am writing an application in which I'm trying to push a second display to a custom in the first menu item. The first screen is pushed successfully and the custom menu items are filled with a bluetoothserialportlistener. Once I click on a special menu item, I want to launch the second screen. I used a dialog.alert to verify that the the menuitem run() method works, but the second screen is not displayed.

  Any suggestions are greatly appreciated!

  The first screen is created by hand (String [] args)

  MatMain app = new MatMain();

  app.enterEventDispatcher ();

  private MatMain() {}

  pushScreen (new WelcomeScreen());

  }

  I tried to call the second screen as follows:

  synchronized (UiApplication.getEventLock ()) {

  getUiEngine () .pushScreen (new MatOnline (_info));

  }

  I also tried:

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  Thanks again!

  Hello

  I think you're trying in a very complex way.

  Your architecture using complex and ignoring the bluetooth codes related, I can see your second screen with a minor modification.

  In your DeviceMenuItem class.

  replaced

  MatMain.getUiApplication () .pushScreen (new MatOnline (_info));

  with

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  And in your class MatOnline:

  replaced

  HorizontalFieldManager _fieldManagerOnline;
  with

  HorizontalFieldManager _fieldManagerOnline = new HorizontalFieldManager();

  Concerning

  Bika

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• CTRL-Alt-2 moves to the second screen windows - how to disable

  Hello

  I have a new computer to dual screen in Windows 8.  When I do Ctrl + Alt + 2, my current window is moved to the screen 2 (and equivalent to 1).  Does anyone know if it is a shortcut of Windows 8 or another utility?  I have a nVidia graphics card and the 7200LE Panel is not shortcut (besides the stereoscopic 3D features that are disabled).

  The problem is that Windows seems to treat the key ALT GR (right Alt key for the keyboard layout of the French-Canada) as a combination of Ctrl + Alt, then when I press Alt Gr + 2 to type the symbol @, my window also moves to the second screen.  The equivalent problem is when I type the ± symbol (AltGr + 1 gives my character, and move the window), but this isn't as big a problem.

  Anyway, if anyone knows how to disable the Ctrl + Alt + 2 sets of shortcuts, or how to make windows treat differently the keys Ctrl + Alt, AltGr do let me know.

  Thank you
  IM

  I had the same problem, and in my case it was a third-party application that came with a USB to DVI adapter.

  The utility is called "MCTDUtil.exe" and is in "\Program Files".

  It has a visible icon called "Super Utility".  There, you have a menu called "Multi Display Control Panel".  The Ctrl-Alt-1 and Ctrl-Alt-2 are mapped to do exactly this: move the window being displayed 1 and 2 respectively.  You can disable the feature of this Panel.

  I suspect that this utility is not necessary and can be removed.

• Splitscreen does'nt give the second screen of the image, just green?

  Splitscreen does'nt give the second screen of the image, just green?

  Clear the option use the GPU.

  Bar menu, Edit > Preferences > Performance tab, uncheck this option.

• Cannot use ps on the second computer

  Cannot use ps on the second computer

  You are allowed to download and install the cloud creative on the second computer as long as you use only one at a time:

  FAQ: Can I install Creative Cloud on several computers?

  If you have some problems to install:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

  If you find errors or have another problem, please provide details.