Cannot connect second laptop to wireless network

. Laptop my son (Vista) (Internet Explorer8) "cannot display the web page. Said diagnosis connect a cable to the NIC 'Connection to the Local network' - its supposed to be wireless and my (1 laptop Windows 7) is online. It was OK, but I changed to a new Talktalk wireless router. The computer Vista laptop says it's connected locally. Help please

Hello

·          You have the updated drivers for the network card?

·          Have you been able to connect to the network after replacing the router?

If not, you can check the settings of the router and if your computer has the correct router configuration.

See also:

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks

http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

You can try the suggestions in the given below link and check if this is useful.

http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

Hope that information was useful

Amrita M

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Cannot connect Tecra 9000 to wireless network

    Hello

    I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
    The laptop recognizes the hub, but every time I click on connect, I get the same message.

    ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

    I went through a few troubleshooting steps to resolve this problem, but always without success.
    Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

    I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

    Kind regards
    Answer by quoting

    > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
    This may be possible

    The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
    I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
    The wireless network must be always secure

    The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved

  • Cannot connect or find a wireless network already in memory

    I'm having some trouble connecting to the wireless network I have in my house. I already had the network wireless saved on the laptop, but now I have difficulties as well to find the network and also to connect manually. You have any ideas what I can do?

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not resolve the problem:

    ·                         Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot connect android phones to wireless network

    Hello

    I have 2 phones droid, now they can connect to the old Belkin router and hot spots
    but can not connect to MN - 700
    But my laptop can connect wireless
    I have not activated the MAC filtering
    I tried enabling it and added the MAC address of the phone, but no luck
    Static IP setting is not set on the router or on my phones
    I can't also connect to the server mumble to my friend... I don't know if they are related problems

    Any help will be appreciated
    Thank you

    (Sorry to ask on the forum Windows, there is no option for the router)

    Hello

    You can also link below to browse your connection settings:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    B Eddie

  • HP OfficeJet Pro 8610: Printer cannot connect to the new wireless network

    I got the OfficeJet Pro for a while and everything worked very well (including wireless printing from my Mac and iPad AirPrint). Yesterday, we got a new Modem Router (from Ubee). As I tried to connect the printer with the new network, I fail miserably.

    Here's what I've tried several times: on the small screen of the printer, I select: Network Setup > wireless setting > Wireless Setup wizzard. The printer seems to networks, find the network and asks me the password, I get the password (I did this several times, so no typos!). The printer then "trying to connect to the network"... then it crashes: for a very short moment, I get a blue screen with a white error code (not always the same, for example.) B3FF3802) and then the message "error in the printer, turn off the power, then press.

    I turned off the printer and turn it back on several times (incl. pulling out the power plug and restart after a while), but when I go through the steps above, but I just get the same endresult.

    I deleted the old network as I feared it might interfere with the creation of the new network. No noticeable effect.

    I printed the "results of the wireless network test," which confirms that "your HP printer is unable to connect to your wireless router. In the results of the diagnosis, he states that 'network name (SSID) was found - Fail.

    I quite understand the message that the printer detects the network and shows good SSID / network name. I thought to enter the SSID manually but can't find where I could do.

    I'd be very grateful for any suggestions on what could be the problem (I can't imagine that the printer would not work with a new router... I searched the internet and found stuff on 'Hello compatibility', but do not know which is the issue I'm facing.

    Thanks for your help!

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  • My computer cannot connect to a WPA2 wireless network.

    I'm on a Dell inspiron 6000 with Windows XP and service pack 3. I recently used a WPA wireless connection, not all of a sudden trying to use this new network, I can't connect.  I type the key network and nothing.

    What I can do and if anyone has any ideas, I'd appreciate it greatly,
    Thank you

    Hello

    I suggest you to download this utility from the link and run the same:

    Troubleshooting Microsoft Windows XP-based wireless networks in small businesses or individuals: http://www.microsoft.com/download/en/details.aspx?id=10634

    You can also follow the steps from the link: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

    You can also view: problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  • Cannot connect iphone, ipod for wireless network

    Original title: my laptop connects to my router asus but my iphone, iPod and other devices don't please help

    my laptop is connected to my wireless router, but no other device can any body help

    Hey Mark,

    You seem to have problems connecting to the Apple products to a wireless router.  Would be nice if you can post your question in the Apple Support Forums.

    https://discussions.Apple.com/index.jspa

    Here is a link I found in the Apple Forums that might help you.

    http://support.Apple.com/kb/ts1398

    Good luck!

  • HP LaserJet 1102w Professional P cannot connect to protect the wireless network

    Hello guys,.

    I have a customer who has this printer works very well until 2 months ago but now I'm getting problems to get the WIfi connection

    The script like:

    -Dlink router without password, with active MAC filtering.

    -MAC address of the printer (enter the Wifi list)

    -Manuel IP defined in the configuration of the printer page

    Now the printer only get connection to Wifi if I disable the MAC Dlink filter. If the filter as it is enabled, the printer remains offline (with blue led "blinking").

    Any ideas?

    You can connect without filtering, and then in the address mac filtering to add the mac address of a list generated automatically rather than manually typing it?  can activate filtering?  Is what model dlink router?  Also is there any other devices that are connected to the router by using the filtering?

  • Problems printing from laptop to wireless network

    I've had problems for months now print wirelessly from my laptop to my printer. I use a HP OfficeJet 6700 Premium, and my laptop is a Lenovo. When I click on print a document, I get a warning on my laptop that the driver for the printer is offline. I tried to restart my laptop, disconnect and reconnect to the internet, restarting printer, disconnect and reconnect it to the internet, uninstalling and reinstalling the printer (using the existing driver and replace). Sometimes one of these 'corrections' works, other times not. Tonight I tried to restart the two, reconnect the two and then uninstalled and am trying to reinstall it but my laptop cannot find the printer to install it.

    I am at a total loss. I work from home, sometimes and I bought a wireless printer for the convenience that he cannot stand on my desk next to my laptop to connect to the computer. (Also don't know what happened to the cord for the printer on the laptop, presumingI got with the printer.)

    Both devices say they are connected to the internet. I can test my laptop and the internet connection works fine, don't know how to test the connection of the printer, but it says connected and has an IP etc.

    I also tried disconnecting everything but the computer laptop and wireless network printer, and it won't always connect to print.

    Can anyone offer any fixes? This becomes incredibly frustrating when I sit down to work and fight with the printer for hours.

    Thanks in advance.

    Hello KitchenTalesand welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have connectivity problems.  I would like to help.

    I recommend you to perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    Once the reset is complete, I recommend you to unplug your router for 60 seconds, and reconnect power.

    After the restart appropriate time, I would recommend using this document on troubleshooting wireless printing Center.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Recently installed vista update. I can no longer connect to my home wireless network.

    Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

    Hello

    Check the firewall it is maybe it has been reset.

    In general.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

    Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

    Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

    Hello

    1. If it works well before?
    2. Did you of recent changes to the computer before the show?
    3. What happens when you connect the VGA cable to TV to the laptop screen?

    I suggest to refer to the article and perform the steps mentioned there.

     

    How to configure and use multiple monitors in Windows XP:

    http://support.Microsoft.com/kb/307873

     

    Reference:--

    Setting up dual monitor: two screens are better than one

    http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

     

     

     

  • Connecting to the wrong wireless network.

    Nope.  Tried to make this process a few times just to make sure that I was just doing and still it connects to the wrong network.  Something else I could try?

    I'm in the boat the same, did you ever get a resolution on this?

    Separated from the<>https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connecting-to-the-wrong-wireless-network/633fcfd6-7bdd-4369-b66f-94611c5df76e >

    Here are some solutions to try if you can't connect to Wi - Fi. Follow the below mentioned steps to solve the problem:
    1 remove the network and let Windows re - find. Then enter the password again.
    http://Windows.Microsoft.com/en-in/Windows-8/get-online-tutorial
    2. change the TCP/IP settings, if the IP address is set to manual
    http://Windows.Microsoft.com/en-in/Windows/change-TCP-IP-settings#1TC=Windows-7
    3. If none of the above steps work, follow the link to solve the problem below:
    http://Windows.Microsoft.com/en-in/Windows/cant-connect-to-network#1TC=Windows-8

  • OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

    Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

    Any suggestions?

    Hi @dburbage,

    I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

    Thanks, I look forward to hearing back on your part.

  • Cannot connect my new HP4620 wireless all-in-one printer on my local network

    The printer is aHP 4620 all-in-one wireless printer.  The network is a Linksys Wireless - G Broadband Router connect an old HP Pavilion zv6000. portable 32-bit laptop running Windows XP and my brand new Pavilion dv6-7010us 64-bit running Windows 7.

    First of all, I ran the installation disc for the printer on the Pavilion zv6000.  Wireless Setup went well without any problem the printer connected to the router and to enable printing of thezv6000...  Then, I loaded the printer installation disc in the new Pavilion dv6-7010 and started the installation.  Everything went well until what the installer told me to connect the USB cable between the printer and the computer, and shortly there after that I got an error message an unknown error and that the installation program has been stopped.

    Since then I ran, I think, all the trouble shooting programs recommended with different results, all unsatisfactory.  Right now the test of the last wireless network said that the wireless is on, the wireless works. The connected test did not run.  the major flaw is that the SSID was not found, but there were 5 other networks detected.   The current configuration is: SSID is not set, the Mac address is OK, No IP address is defined, mode of Communication is Infrastructure and Authentication Type is open system.

    Printer is no longer printing of thezv6000.  However the zv6000 both my IPAD become jobs printed via

    HP eprint.  It does not appear that there is something wrong with the printer mainly a configuration problem.   Any suggestion would be

    greatly appreciated.

    Hi Beelzebub2,

    Follow the steps outlined in the document below and let me know what you find?

    "Cannot find the printer" error message on the computer during a wireless network Installation

  • Laptop will not connect to my home wireless network

    I've had my laptop for a few months and my home network wireless also. My laptop has always worked perfectly until last night, I was in the living room and my phone cut because it ran out of battery. I went to restart, and when I did, NO network could be found, and several others usually appear outside my home network. The wireless switch is turned on and I rebooted the computer several times, I ran the wizards and shooters of boredom, I started the wireless zero configuration, but nothing happens. everything he says is "wireless networks could not be found", and when I click on the message, a black box appears with a message saying "windows has encountered an illegal instruction. I don't know what to do. my laptop model is a Sony Vaio, but that's what I know. My ipod connects to the wireless perfectly, so I know its my laptop that needs fixing.

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

Maybe you are looking for