Cannot connect my iPad to an ad hoc network.

Similar Questions

• Adobe Content Viewer cannot connect to iPad only

  Hello

  We did a folio and shared with a client via digitalpublishing.acrobat.com.

  The client creates an Adobe ID, received an email from adobe and clicked the link to check the validity of the e-mail address.

  He has agreed to the terms on the Adobe site.

  On an iPad, it cannot connect to the Adobe Content Viewer.

  But... it works very well on an Android tablet.

  I asked the customer to go to digitalpublishing.acrobat.com and accept the terms, but it still does not work.

  How can I solve this problem?

  Adobe Content Viewer is our showcase for potential new customers that we are able to do. If I can't show... I can't get new customers.

  TIA.

  Olivier - Concerto

  I finally thought to it. I connected to the DPS on the desk and received a confirmation email. Then, when I went back to the iPad, the connection worked. Thanks for getting back to me.

  -Michael

• Computer cannot connect to internet after the user changed network name

  Original title: "Network__".

  We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?

  You gave your PIN #?
   
  There should be a reset button on your access to restore your system to
  by default. Of course, you will then have to re-enter many of your
  security data, unless you have saved it.
   
  "Artic Auto Air" wrote in message
  News: 92aa11d3-77ea-4680-b04c-c415b59e2c66...
  > We provide free wifi in our lobby and yesterday a man asked our pin #.
  > so he could get on the internet, we discovered after leaving one of our
  > computers cannot connect to the internet because the name of the network shows now
  > like its computer network and there need a code key passes and the password, how
  > We turn off and back to ours?
   
   
   

• Cannot connect Wifi IPad.  I've done all the suggested advice to Apple and it still does not connect.  I need help!

  I can't connect my wifi Ipad.  I tried to off suggestions for Apple.  Now I'm stuck in the IPad introduction after my hard stop and when I get to choose a network, it is not mine.  All other devices in the House are connected.  I can't get out of the set up mode to go into the settings and try to activate the wifi.  Suggestions?

  Because you cannot find your network, the SSID is hidden by the router? If so, you need to select other, and then enter the SSID and password yourself.

• Internet connection sharing on a wireless ad hoc network

  Hello

  I have an internet connection of the dongle on my laptop, so I want to use this network on my moblie ad hoc help from my laptop...
  I have set up ad hoc connection.set to the top has been successfully configured but in my laptop have not seen 'no wireless connection available.
  Guys please help me...
  I'm from Surat, Gujarat, India...
  Please get back me as soon as possible if anyone knows this issue...
  my email is * address email is removed from the privacy *.
  Please do what is necessary...

  Maybe this can help.

  http://virtualrouter.codeplex.com/

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• Computer cannot connect to the printer via the local network

  I have two computers sharing a printer, the printer is connected with USB is Vista Home Premium 32-bit. The other which must be connected wireless is old computer Windows 7 Home Premium.My, I suppose his ultimate, I'm not sure tho, that works fine with the printer. This Home Premium one just can not connect to the printer. It keeps saying can't find a print reader, I downloaded a universal driver HP that I learned other positions, and he said that it was not a correct driver.

  I asked our technical support to help me. And he told me that Home Premium has this problem. The only way I can solve this is to update my system at least pro. I checked online but I have not seen someone talked about this. Just make sure that is it true? If not, what can do now?
  Thank you very much.

  Hello

  -What is the brand and model of the printer?

  This isn't a problem with different versions of Windows support network printer.

  I suggest you go through the following links and check if it helps.

  Network printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

  Note: The steps are also applicable to Windows 7.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  Let us know the result once you have tried the steps mentioned in the link.

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• Cannot connect to iTunes Store on new iPad Air

  Try buying an iBook.  Keep being told that I can't connect to iTunes store with my new iPad Air.  In addition, my security questions are not accepted. Advice?

  The steps detailed here to try to see if they help you:

  If you cannot connect to the iTunes Store - Apple Support

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• When you press the button to update on ipad, it says cannot connect to store

  When you press the button to update on ipad, it says cannot connect to store

  Contact Apple for problems with their equipment and services. http://www.Apple.com/

• My mini iPad 7.1.2 iOS (11D257) update check, cannot connect to iTunes to download the update

  I had my Mini iPad for years and left on iOS 7.1.2 because it's an older device. I tried to download a new application for my children, so I need to update the iOS. However, when I try to update via the General settings on the iPad, it will just say 'Check updates' for hours. I tried to connect my iPad to the computer and use iTunes to update to a newer iOS, but iTunes does not seem to recognize that my iPad is connected. My iPad is responsible (although slowly, and the iPad claims that it is not supported) and I use the same cord load/update my iPhone 6 on the same PC, so it's not the USB port or the power cord. Any suggestions?

  Make sure that you use the latest version of iTunes, 12.4.2 and take a look at this document of support for the troubleshooting steps for getting your device recognized by iTunes. If iTunes does not your iPad, iPhone or iPod - Apple Support

• I can connect to ad hoc networks, but cannot navigate

  I have a compaq laptop with VISTA home SP2 original base. I have can create and connect to ad hoc networks but once established connection, other computers on the network do not appear on my network card, so I can not navigate on their.

  they can see my laptop on their network, but they can't sail too not my camera. It is shown as "inaccessible" on their network

  I activated files and printers, sharing, file sharing and all the options.

  XP and 7 do not have this problem, vista laptop to have this problem

  Please help, I'm frustrated

  Thanks in advance

  Hello santu

  The link below has a multitude of steps that you can use to try to resolve this problem. I hope this helps.

  http://forums.techguy.org/networking/925138-solved-ad-hoc-network-CMPTR.html

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?