Cannot connect to other computers

Similar Questions

• Win7 computer cannot connect to other computers Win7 network "\\computername is not accessible. You might not have permission to use this network resource ".

  I have a Windows 7 (box A) system that cannot connect to files shared on another computer in Windows 7 (box B).

  • On the 'network card' and 'See the network computers and devices', I can see box B of area A.
  • I can ping Box B of area A.
  • I can connect on MEDIA sharing on box B of area A.
  • Area C (another system of Windows 7) I can connect to the B area and am presented with a box of authentication to connect to the shares (i.e., box B works as it should).

  But the box has double clicking on box B or using \\computername or \\IP_Address the dialog box run, I get the error:

  ----

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network is not present or not started.

  ----

  I know that the system is available, because the area C can access... But something's not on the box... It cannot connect to zone B or C. Box

  I have disabled the firewall on both systems without result.

  I reinstalled the network adapter and Client for Microsoft Networks is installed on the box.

  Yet somehow box's not connection to other computers on the network.

  Any thoughts on what I should check would be appreciated.  Thanks in advance for the help.

  OK... so I was able to track down and get it fixed...

  I found another symptom (that would be a good way to check and see if you experience the same problem).

  In the network and sharing Center, I clicked on "Change advanced sharing settings" in the left column. I found that the radio button under "File and printer sharing" was put on the OFF position.  I started and saved the changes, but when I returned in these settings, it is once again in the off position.

  It turned out that the workstation service is set to disabled (which also caused the computer browser service for not being able to boot). I activated the workstation service, started, and set it to automatic.  Then did the same for the computer browser service.

  Both of these services running, the "File and printer sharing" it will remain actually on IT, and I am able to connect to other devices on the network in the way I had to.

  I can't mark this message as the solution (perhaps because I posted it?) so if someone he will quote as their response to the post office, I'll be able to mark as answer.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• To connect to other computers on the network

  Is it possible to connect to other computers on my network through the slate of 7 (laptop)?

  Can take a look at Splashtop2 in the game store.  Worked great in webOS, should be just as good in Android.

  WyreNut

• Windows 7 does not connect to other computers in the same homegroup network

  Computer is a Dell Latitude E6500 in good working condition. Printer is connected to a desktop computer running on Pentium IV with HP LasetJet 2100.  The Pentium IV is only for printing but must be able to make a link to it. All systems have max ram and large capacity disks. All systems are running Windows 7.

  Hello Willard,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. what happens when you try to connect to other computers? you receive an error message or code?
  2 update you installed before the show?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem can occur for the following reasons:

  -Network discovery may be turned off.
  -Password-protected sharing is turned on.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why can't I connect to other computers?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• No wifi connection have the connection with other computers

  Unable to connect to internet with wifi connection ok with the ethernet cable.    disabled Kaspersky antivirus (no change) have used the restore of the system (no change) I have two other computers and connection ok.   Have tried internet explore and Google Chrome - neither work.   With Google Chrome get error 106.   Uninstalling Google Chrome (no change)

  Hello

  Did you change your computer?

  I suggest you to see the links and check.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Impossible to establish physical connections to other computers

  We have just received a new BEFSR81 router.  The first computer and internet connection installed with no trouble.  Now, I try to connect other PCs but can't seem to get a physical connection.  All computers are on XP and have ethernet cards.  I connect 2 different PCs, using 2 different cables, but don't receive a light led on the port.  The computers also not sohow not a connection.  Any ideas?

  Thank you

  Here are some parameters that you can set on your computer when your computer is connected to the router by an Ethernet cable.

  Click the Start button > go to RUN > type in "ncpa.cpl" - hit OK > here (network connections) right click on the "" connecting to the Local network' "icon and select properties-here click the jaspal"Set up"button - click on the tab 'Advanced' - in the area of 'Property' to highlight the link speed and duplex/connection network/type or type of media - and in the"Value"box select 10 MB/s half duplex / 10 half mode base T/10 basic and Click OK.

  Now, check if you are able to browse Internet on your computers.

• Vista can connect to other computers on the network, but not to the internet

  I have a Vista computer that I just reinstalled and it is connected through a router Thomson to a Win7 machine and internet (or at least it should be).  For some reason any Vista machine refers to the network as a public network that I can change this private and turn on discovery.  If I do that, then the machine Vista can see the Win7 machine through the router, but cannot connect to the internet.

  I tried to use the disk driver for the Thomson router on the Vista machine, but at the time wherever he tells me to connect cable internet installation program does not detect that the cable has been connected.

  Troubleshooting with software Vista suggests simply reboot the router (that I tried without success).  Needless to say that the Win7 machine connects to the internet fine.

  I was wondering whether to try to remove the connection and start again, but unable to do so because when the cable is plugged in tells me you cannot delete an active connection and when I disconnect the cable network connection disappears and so cannot be deleted.

  Grateful for pointers

  Ian

  Hi IanRC,

  Try the following steps.

  Step 1

  You can try to disable the antivirus software on your computer and check if it works. Activate antivirus once you check the status.

  Note An antivirus program is designed to help protect your computer against viruses. You must not download or open files from sources that you do not have trust, visit Web sites that do not trust, or open attachments when your antivirus program is disabled.

  Step 2

  Try the Microsoft Fixit. Open the link below and click it on the Fixit button.

  http://support.Microsoft.com/kb/928233

  Check if it works and post back the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When will Windows 7 be compatible with Internet access? When I go through access of __web it says "not supported on this operating system" __I just bought 2 new P 7 computers that cannot access the other computers on my network. __

  See above

  ·                                 This is the Forum for Windows Update .

  For questions of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect an epson printer all in one to this computer, even if the printer is connected to other computers on my home network

  I get an error when the installation disc connects who says that my computer is not compatible with the program, however, I have another computer running the same operating system on the local network

  Hello

  What is the printer model number?

  In the error message, the driver is not compatible with the computer.

  I suggest you contact the manufacturer support for drivers that are compatible to run on Windows XP computer.

  Epson support

  http://www.Epson.co.UK/support

  As a solution I suggest you read the following article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Delete connections when other computers connect to WRT 110

  OK, so I saw this earlier question, but there was no resolution, so I'll try again with my problem.

  I have a 110 WRT router and my DSL modem is an Actiontec M1000. My main computer is plugged into the router and I have 2 laptops that connect regularly. The two laptops running Vista and laptop 1 series Vista Home Premium 32 and 2 Latop runs Vista Home Premium 64.  When 1 laptop connects wireless everything is fine and the connection is great.  Yet, when 2 laptop connects while 1 laptop is connected, then all connections turn out same cable one in my computer.  Then I have to do a repair of connection for repair.  Also, when this happens I plug my computer directly into the DSL Modem and it connects fine.  Becomes pretty bad and I checked all my settings for the router and the Modem and everything seems ok.

  If someone has any information or if you need additional information upon request.  I have no idea why he did this.

  Thank you!

  OK so I have good news and bad news... ok only good news! It worked and we all can now connect without loss of connection!  Thank you so much! This was very helpful!

• I am not able to connect Stor-E for the other computers on my home network

  I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.

  I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.

  Someone has an idea what I am doing wrong?

  But in general your Stor-E works correctly when you connect it directly on different computers, right?

• I have two computers in Windows 7 which will not each other on my network. All other computers will see and can share files, but they connect between them.

  My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.

  Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.

  WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.

  Any help would be appreciated.

  Thank you!

  Hi Jonathan,.

  I see that you two computers on the network cannot see each other. I'll help you with this problem.

  1. don't you make changes to the computers?

  2 are computers on a domain network?

  3. do you have a router connected to these computers?

  Method 1:

  Open the HomeGroup troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2.

  Make sure that the following services are enabled on the computer.

  (a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 3.

  I suggest you follow the steps in this article.

  Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  Method 4:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Refer.

  Homegroup:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Other computers cannot access my shared folders

  I searched this topic and I read all the messages that seem to apply to me.  I still have the problem.  Maybe it's something unique to my setup.

  My computers:

  XP Pro (desktop computer)

  XP Home (laptop)

  Windows 7 (laptop)

  I shared the files back and forth on both XP machines successfully in the past to similar problems, but I've always been able to fix somehow.

  Once I added the Windows 7 laptop, for some reason, nobody can now access the XP Pro files.

  The XP machines are on the same workgroup.  File and printer sharing is enabled. The Windows Firewall is disabled.  I don't have Norton or any other firewall software.

  Each computer can see others, and any sharing of files can be used, except that the Win 7 or XP Home can access the XP Pro files.  They CAN be seen, but they are not accessible.

  HELP >?

  Hello

  The links mentioned below which can help you in the matter of fixing.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Ensure that all records and files to share have had rights in the properties.

  Hope this information helps.

• Cannot connect a bluetooth device to my e420s 4401-4ng

  Hello.

  IM unable to connect my headset to my pc.

  the headphones are Plantronics BackBeat 903.

  I have no problem to connect to other computers or cell phones, also.

  When you install the Bluetooth driver, it says that it cannot find any bluetooth device, even if the helmet they run on the search for a device (or whatever it's called), but the laptop sees them not at all.

  still, I don't have this problem with other computers.

  In addition, Ive tried to install the latest bluetooth driver available on the lenovo site, but I can't finish it (have to cancel, it is not finish it without locating the device).

  any suggestions?

  Thank you!

  Try pressing Fn + F9. The Bluetooth radio appears in the list?