Cannot connect windows pc and my xbox 360 elite

Similar Questions

• Why is that I can connect my PS3 AND my XBox 360 Wireless but my PC does not show them in the network and file sharing?

  File sharing

  Hello

  Your PC still has wireless capability? If it's a laptop he probably does. If it's an office that is probably not.

  If it's is a laptop a switch to activate? Consult the help files for your PC or visit the manufacturer's Web site.

  Tricky

• Cannot connect Xbox 360 Elite to runnings Windows Vista PC

  After surfing the internet for hours, I really need help with this problem...

  I am trying to connect my Xbox 360 Elite to my PC running Windows Vista Home Premium (32 bit).

  I can connect to Xbox Live without any problems, and the Xbox also appears in the network view in Windows (and in WMP11 media sharing).

  The Xbox also discovers the PC and COMPUTERNAME:username display on the screen. But when I try to connect the Xbox since it does not work. I have tried many solutions and advice found on the internet, but I can't work.

  I also tried to use the Media Center and connect the Xbox as an Extender. Does not work either.

  Is there a setting somewhere in Vista that keeps me?

  Hi Christian,

  ·        You receive an error message when you try to connect to the Xbox?

  ·        You are able to access the Xbox from the PC?

  You can try to temporarily disable the security software and third-party firewall on the computer and check if you can access the computer of Xbox. If you are able to access, you can contact the manufacturer of security software and firewall manufacturer to check if you need to change the settings. Subsequently re - activate the firewall and security software after verification.

  You can also post your question on the xbox forum and check if you can find any suggestion that can be tried to solve the problem of connectivity to the xbox. Access the link below to post your question in the Xbox forum.

  http://forums.Xbox.com/

  I hope this helps. Let us know the results.

  Thank you and best regards,
  Srinivas R
  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My xbox 360 elite has 3 lights on this is my 3 xbox console rd for this do and im not happy about this at all, please can you me how to send again to be repaired im in Ireland, my email is < email removed for privacy >

  problems with my xbox 360 elite

  Hello-
  I found this article which deals with three lights on:
  http://support.Microsoft.com/default.aspx/KB/907534/en-us
  Barb winter
  Program Manager of Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If you get the answer to your question, please go back and mark the reply as an answer while others may find it.

  If you get helped by a response to someone else's question, please indicate the useful post.

• Share printer and file sharing has stopped working. -Between a Windows Vista-based computer, a Windows 7 PC and an Xbox 360

  A computer running windows vista and is connected

  Computer B is running windows 7 and it is wireless

  Is the Xbox 360 Wireless

  a couple of weeks computer disappeared from computer B and my xbox network adapter. computer a can still pull files from computer B, but it does not work the other way around. Computer B can share files with my xbox, but computer cannot.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  Read the information above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Media Center and my Xbox 360 extender connection

  Hi I have a problem connecting my xbox 360 and my windows vista media center. Everytime I try I get the message saying that it can't find the range extender and suggests that it is one of the following three things

  (1) the Extender is turned on and connected to the network

  It's on and it appears as an icon of the xbox 360 in my network on the vista machine and can connect to the internet, so I guess the network very well.

  (2) that the code is correct

  It's that I checked it about 30 or twice now.

  (3) UPnP does not work properly

  I guess that's the problem but cannot figure out how to solve. I have a BT Homehub router. I've implemented through active UPnp. I even tried to disable the firewall completely on it and on vista, it made no difference to the port forwarding doesn't seem to be the answer.

  Help please it is one of the main reasons I got an xbox 360 and vista

  Paul.

  Paul Bradbury,

  There are always a few things that do not exist to try, so we can solve your problem. Below you will find a link on your specific issue. There are about four troubleshooting methods that you can try. Please let us know if it worked for you, and if so what method has solved your problem.

  http://support.Microsoft.com/default.aspx/KB/932159

  Let us know if you additional questions or concerns.

  Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer cannot detect the receiver of wireless Xbox 360 for window controller.

  Hello Microsoft,

  After I have tool on my computer for cleaning, the receiver of wireless Xbox 360 for window controller is not detected when I tried to plugged into computer. I have already downloaded new version 1.2 which is supported for Win 7 (64-bit). It still does not work. I tried to go to an another USB 2.0 but it's the same thing. Please help me. Thank you.

  Hello
   
   
  1. are you able to use the USB ports with other devices usb successfully?
   
  2. What is the status of this device in the Device Manager?
  See the links below for help on Device Manager.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  What is Device Manager?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-Device-Manager

  
   

  You may need to reinstall the hardware on your computer. To install the software by downloading it from the Internet
  a. go to the download section of website material Microsoft game software by following this link:
  http://www.Microsoft.com/hardware/download/download.aspx?category=gaming&type=gaming
  (b), select the type of product, select controller.
  c. in, select your product, select Xbox 360 Wireless Gaming receiver for Windows.
  d. in, select your operating system, select the version of Microsoft Windows you are using on your computer.
  e., select your operating system language, select the language used by Windows on your computer.
  f. click OK.
  g. click the link to start the Setup program.
  h. click on run.
  
  Xbox 360 accessories Setup installs the necessary files on your computer.
  Note: You may be prompted to restart the computer.
  
  You can also check out the article below which explains how to install this equipment.
  How to connect a wireless Xbox 360 controller or headset to your computer
  http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=933710&lcid=1033&category=hardware
   
   
  Hope this information was useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• Cannot connect Windows Marketplace error connection to the service.

  Original title: Cannot connect to Windows Marketplace

  When I try to connect, I get the following message:

  Error connecting to the service.

  There was a problem connecting to the Games for Windows - LIVE service. Click Retry to try connecting, or click on troubleshoot to attempt to diagnose and fix the problem.

  If you continue to have problems to connect, you may need to contact your ISP for assistance.

  I am able to use all internet services.

  Hi Torrey,

  I suggest posting your question in the games for Windows Live Marketplace forum located here:
  http://forums.Xbox.com/GFW/technical_support/marketplace/f/271.aspx

• Have a virus/malware and cannot open windows mail and how export/copy the measages

  I should have gotten a virus/malware/trojan, which affects the connection and does not allow me to open the control panel, or windows mail.

  I need to know how to copy/backup/export the e-mail messages that are still there. Of course, I can't use the export function since I can't open windows mail.

  Hello

  • You receive an error message when opening Control Panel or Windows mail?
  • What were the changes made before the issue occur?

  You can view these methods:

   
  Method 1:
   
  I suggest you make a system full scan just to be sure and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  NOTE:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
  You might try the following and see if it helps to get Windows Mail open.
  You can delete all entries in the registry for Windows Mail. The junk e-mail filter information have been corrupted.
   
  a. Click Start, in the search box, type regedit. Then choose continue to leave and then read the help file.
   
  b. then highlight this registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail
  right-click and choose export to back it up. You can save it to your desktop. It will save the key as a measure of protection.
   
  c. make sure that Windows Mail is closed and right click on the key again, and then choose Remove.
  d. then try to start Windows Mail and see if it is now open.

• Empty Connections window network and could not start the network connections service

  Problems with Verizon router and during diagnosis discovered that the network connections window is empty (found by clicking on change settings for the network and sharing Center map).  We are currently connected to the Internet with the new router and Ethernet cable, but the cannot connect wireless (what we could do before) - apparently not to display icons in N.C. window is not necessary to have connections.  Found a reference to the network connections service and check it is running as a solution to the window being blank.  The service is not running, and when I try to launch it I get "Error 1083: the executable program that this service is configured to run in does not implement this service."

  I've seen a lot of suggestions on fixes for the problem of the empty window.  I did the sfc /scannnow and found no problem.  I tried to update the network adapter driver, but it was very good.  None of the solutions seemed appropriate perfectly adapted to this situation.  Is this really a problem?  Any suggestions on what to do about it?  We are about to use an USB adapter until our connection speed and I want to make sure that everything works first.  Thanks for any help.

  Hi EWright1, we will check the settings of the service.

  Click Start, type CMD. EXE and press {ENTER}

  Type the following command and press ENTER:

  REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  Copy the output and post with your response.

  Ramesh,

  Thanks for the suggestion. The output of the query to register below.

  C:\Users\Edward > REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman
  DisplayName REG_SZ network connections
  ImagePath REG_EXPAND_SZ %SystemRoot%\System32\svchost.exe - k netsvcs
  Description REG_SZ objects manages in the network and remote access connections folder, in which you can view the network local and remote connection
  .
  ObjectName REG_SZ LocalSystem
  ErrorControl REG_DWORD 0x1
  Start REG_DWORD 0x3
  Type REG_DWORD 0 x 120
  RpcSs DependOnService REG_MULTI_SZ
  ServiceSidType REG_DWORD 0x1
  REG_MULTI_SZ RequiredPrivileges SeImpersonatePrivilege\0SeChangeNotifyPrivilege\0SeLoadDriverPrivilege
  FailureActions REG_BINARY 8051010000000000000000000300000014000000010000006400000001000000640000000000000000000000

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Enum
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Parameters

  Hi EWright1,
  Follow the steps listed under "Reset Network Connections Service registry keys" in this URL:
  Difficulty for Service (Netman) 1083 in Windows 7 network connections error:

  http://www.Winhelponline.com/blog/fix-for-network-connections-service-NetMan-Error-1083-in-Windows-7/

• Communication issues in Windows 7 with the XBOX 360

  I also have the problem of my windows premium 7, refusing to talk to my xbox 360...< not="" the="" controller's..="" it="" talks="" to="" them="" fine="">

  But the Xbox itself on the other side ot the network...

  So please don't tell me to install controller drivers...

  Really do not do...

  Yes, I've read hundreds of times people have asked this very question.

  To always have the microlimp people answer with «just install the controller driver and everything'll be fine...»  You want a pill with this useless response? »

  My very expensive windows 7 gaming machine speaks to everything perfectly. Everything there is certified to work with windows... Nothing is no name made in China...

  And apparently the xbox slim is certified...

  Then why they will not speak to each other...

  The windows updates did not have a pilot.

  I tried the controller driver... It did not help at all...

  So please don't just tell me to install the controller driver...

  And maybe think about why we shouldn't just scrap xbox and get a media center that works?

  Hell I already used my Roku as well as the xbox...

  He and my windows machine 7 talk to each other with happiness...

  Original title: windows 7 driver driver to talk to an xbox 360.  Do not use the controller with a windows machine...

  Hello

  Thanks for the update on the issue. The query you requested is best suited to be posted on the Xbox forum. He is watched by other computing professionals who would be more likely to help you.

  Forum on the Xbox:

  http://forums.Xbox.com/xbox_forums/default.aspx

  Hope this information was useful.

• How do you play dubbed audio or subtitles in Windows Media Center Extender (Xbox 360)?

  I know how to turn subtitles on my Windows Media Center PC, but there is no option to select audio dubbed or subtitled when you use Windows Media Center Extender. All my video files contain subtitles and audio dubbed foreign films.  My wife loves Spanish subtitles, because she has trouble understanding some English films.  I searched some forums and there are questions there but they have no definitive answers.  How a company billions of dollars developing a Media Center and leave out or miss crucial features like these? Please do not react with the thread on how to activate subtitles in TV Mode. Which does not apply to this question. The key word is EXTENDERS.

  Hi AnthonyWilson5

  Subtitles should be coded in the movie view. These subtitles are automatically playing with video files. If the subtitles are a separate .srt file, then you will not be able to visualize everything by watching a video on the 360. There is no real turn option ON or OFF for subtitle in the Xbox 360.

  But for more information you can even try to contact the expert Microsoft Xbox 360 team. Please visit the links below to find a community that will support what ask you in the right direction for Xbox 360.

  http://forums.Xbox.com/

  I hope this helps.

• I did not write of wi - fi cannot connect windows

  I wrote not wi - fi cannot connect, I have windows 7 drivers on the router and the network card is reinstalled, but did not help

  Hi Anton,.

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not connect to internet. I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the brand and model of your computer?

  
  

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.