Cannot create recovery logs archived

Similar Questions

• Cannot create recovery media

  Attempting to create a recovery media for my new laptop Toshiba L-500; I get the following error message:
  {Cannot read the following file.
  D:\ZZImages\ZZImages\PREINST13. STORMWATER MANAGEMENT
  (Code d'erreur: 020150-20-00000000)}

  This has happened while creating recovery disc 1 and disc 3... with the same error message. considering that the Recovery Disk 2 was created without any problem.
  I tried burning the files again for discs 1 and 3, which could once again, but 2 disk has been created again successful without any problem.

  Please indicate the possible solution.
  (4.7GB//120Min//16X used transonic DVD-R) to create Recovery Media Creator Toshiba recovery disks)

  Try to use TDK or Verbatim DVD-R. I used these empty discs to create recovery discs on several different Toshiba laptops and every time everything was fine.

  It seems crazy, but you may have problems using some some discs.

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• VAIO SVS13A290X cannot create recovery media

  Hello everyone!

  I have just bought a SVS13A290X, win 8, vaio care 8. Just after I tried to create recovery media, but I couldn't.

  There is no possibility to do in vaio care. He do not have a restore option, but not the option to create a recovery media (sic).

  I went to the Sony esupport site and there is an old video on how to create a recovery media. But it does not match the real software.

  I did all the updates with windows 8 and the sony software and nothing has changed.

  Anyone else had this problem with this model PREMIUN SVS?

  Caesar

  Uninstall and then reinstall vaio care and updating

• Cannot create recovery on Toshiba Satellite C850 media

  Hi, tried twice now to create a 32GB flash Pen recovery media.

  First failed then to check the process saying there is a difference between files, second time failed during the process of recording, sorry, but have no error codes, y at - it a newspaper I can look it up in?

  See you soon,.

  Ray

  > is there a log I can find them in?
  To my knowledge, no.

  Try to format USB flash memory stick and try again. Also, you should try another USB key

• Known SSD corruption bug in Folio 13-2000 cannot create recovery due to media

  My folio has been freezing and periodically showing the message "no boot drive" I followed to the critical Softpaq sp60976. I tried to create a recovery media (USB key), but it fails about 19% completion and said it cannot continue. The SSD firmware update requires a secure erase of the disk, but I won't have anything to put it back on the subject.

  My computer is out of warranty of one year. Are there really no recovery, even to buying media at HP? I'll take DVDs, can I attach an external DVD drive.

  Phone your nearest HP Support to order recovery media. Worldwide contact information can be found here >Contact HP

• Cannot create recovery disk

  I just bought this laptop Friday CQ50-142.  Today I wated to create the recovery disc for it.  I will, however, the steps mentioned in the leaflet supplied with my computer laptop paperwork.  When I try to create the recovery disk, I get this error. "A set of recovery discs was created for this PC. That one game is allowed per PC. "I have never setup one set of recovery disc for the laptop.  I don't know that I get this error message.

  How can I create my recovery disks?

  Thanks for your help

  Do you have someone set up your laptop for you?  Was it new or mixed open-box?
  
  You might try to run this fixand try again... or call HP Technical Support to the 18004746836

• Satellite L305-S5917 cannot create recovery disk

  I have a Satellite L305-S5917.

  Yesterday I tried to create the recovery disk with the recovery disc creator, and then when I put a DVD + R, it says 'another application is using that drive or no recordable discs are recognized on your PC. Please check the status of the drive. (Error code: 0D00E4-F0-00000000). »
  I also try with DVD - R, but I wasn't too. Someone tell me what is the problem with my laptop and how do I create a recovery disc.

  Thank you

  Hello

  This error message does not for me.
  You have installed an application like Nero CD/DVD burning?

  Maybe an enforcement agent runs in the background and optical disc drive is permanent in the surveillance state. Restart your laptop, check the substantive activities and make sure that nothing can be responsible for this drive blocking.
  The STRANGE is properly recognized in Device Manager?

  One last thing: for creation of recovery media I would recommend to use high quality DVD-R virgins.
  I had the best experience with TDK and Verbatim.

• Portege R600 - cannot create recovery DVDs

  Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

  Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

  Hi Dmitry_3,

  Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

  In this case, it might help remove upper and lower filters:
  + 1) run Regedit (start-> Run-> Regedit).
  + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
  + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
  + 4) reboot. +

• Pavillion15: cannot create recovery media when plug sandisk Flash Drive Cruzer 32 GB Force

  I put my new 32 gb sandisk Flash DRIVE on my pc and then followed the steps HP support assistant to create a recovery media. I get a message to say the minimum 22 GB capacity. He gets 90% and then comes up with a message saying that we live errors in the creation of recovery media. Please try again.

  Hi @JS100,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand you are trying to create a recovery on a USB media.  The process is progressing well until it gets to 90% and fails then indicating that she has problems in the creation of recovery media.  Please try again.

  Please use a white, not more than 32 GB and USB flash drive high quality brand not like Windows compatible 8.  As he only missed the first attempt, I suggest that you format the USB key before you re-attempt to create the

  image.

  Here is a link to the computers HP - create a recovery Image on disk, or save a recovery Image on a Flash USB (Windows 8) drive that can also help.

  If you are unable to complete the creation of the recovery media please contact HP support for assistance.

  Contact HP to Contact HP Support assistance

  To say thanks for the reply please click the thumb below.

  If you have managed to create your recovery media. Please select solution provided to help others who may experience the same difficulty.

  Good luck!

• Cannot create recovery discs

  Just got my new HP Envy 700-215xt.  The first thing I did was to create the recovery disks. Disc 1 was not a problem. Disc 2 was defective, but worked on the new attempt.  Drive 3 failed 4 times.  He hangs at 0% to check then said to use a high quality white.  I use Taiyo Yuden, and I probably had a failure in my last 2000 burns. Any thoughts? Discs can be purchased and if so how?

  In fact one of the Post-it notes on the recovery said to try to disable user accounts.  Did this and it worked, go.

  Thank you for your time and the suggestion.

• Cannot create Recovery Disc Pavilion g7-1329wm. "will create thru process for a few minutes then"

  Failed to create the recovery disk - Pavilion g7-1329wm, Win7 64

  Recover drive goes thru:

  You are allowed to create a...;

  Prepare the data - get 2 minutes

  «We live errors in recovery...» Please try again;

  Install different DVD;

  Prepare the data - Burn - check Data Recovery - COMPLETE - disk 1 of 5 is complete

  Install the 2nd DVD;

  Prepare gets 94% data

  «We live errors in recovery...» Please try again;

  REPEAT,

  REPEAT,

  REPEAT

  At this point invested 2 hours.

  I have refrained to commit bodily grand on my HP laptop

  I have not officially promulgated commit great bodily harm to many now nameless characters HP Corporate (it seems, however, a tick of the face which seems to calm down when those thoughts ARE diverted.)

  Suggestions?

  You can order recovery media to your usually less than $20 HERE support page. Of course if you are still in the 1 year warranty and HP phone to tell them to fail they usually send it out free.800 - 474-6836 if you are in the United States / CA.

• Cannot create recovery media after installing the SSD on Pavilion TS 11-e100

  Hello

  I just replaced the SSD HARD drive and tried to make a USB support of recovery through 8.1 recovery utility. The process takes strangely little time, but finishes normally have reported that the media are created. The size of all the files on the flash is about 200 MB. When I made the same support with disk size was 12 GB. I tried to start with than flash and it failed with a message on a damaged or similar medium. I always thought that windows does not take into account the physical structure of the disc and can not understand what is happening and what to do.

  Hello

  I use HP Recovery manager to create a recovery media for my machine ready and my wife. I use another software to clone HARD disks for other machines after any big change for example after moving from Windows 8 to 8.1, I create a clone which means I can't do it again, simply restore it back. Use a software called O & O DiskImage clone but the following free software can do the job:

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  Kind regards.

  PS I tested once the 3rd software, it's ok

• White screen C720 cannot create recovery image

  I work with a C720 with a white screen Uni without showing anything. I tried to boot into recovery and watch mode always the white screen (I'm not invited to insert the disc or to reset by the usual recovery mode). If anyone has experienced this before?

  I discovered the problem. The display is somehow inoperable and displaying a white screen. When I replaced it with a working screen, it is now functional.