Cannot distinguish HTTP calls

Similar Questions

• Hello. Dear Apple, I just want to know y iPad 2 Air cannot make phone call or what app or SIM card text have number can you improved

  Hello. Dear Apple, I just want to know y iPad 2 Air cannot make phone call or what app or SIM card text have number can you improved

  Thank you

  There is nobody here from Apple, just we users.

  WhatsApp has not been developed for the iPad. Ask the developers.

  The iPad can't make a phone call because it is not a phone.  But there is a choice of applications such as Skype to make calls over the internet.  The SIM card in an iPad has data only.

• cannot answer the calls when 'asleep '. Swipe will not work, but appeal continues to ring

  cannot answer the calls when 'asleep '. Swipe will not work, but appeal continues to ring

  If you have not already, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose any data, but it can cure a few glitches.

  If it does not, and to make sure that this isn't related software, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If it still does not respond, it could be a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Ugh... Requirement: A TimerTask making an HTTP call, parsing JSON, insertion into a SQLite database.

  How to implement a better design of the following?

  I have a UiApplication which has the following requirements:

  1. A static timer in the class that extends UiApplication.
  2. A class that extends screen and contains a class internal which extends TimerTask.
  3. When a user accesses to the screen, the TimerTask is started with:

     _timer.schedule(MyTimerTask, 1000, 15000);
     

  4. The first step is to do an HTTP call and return a valid JSON object which varies in structure - that is, it has a wide variety of paintings and JSON objects.
  5. The second step is to analyze and insert the JSON object values into tables in a SQLite database. The SQLite file is on the map.
  6. The third step is to read the updated SQLite table, loop through the table and build my ObjectListFields with the new values, and attach them to a VerticalFieldManager.
  7. The fourth step is to replace the old VerticalFieldManager with the new VerticalFieldManager and push the screen pop and updated then the current screen - so I have a stack of view high one single layer.

  Now the logic is actually on the spot, but since the TimerTask must cover every 15 seconds, I am a memory leak in all directions.

  To try to solve this problem, I have:

  • Cancelled the TimerTask with the onObscured and the onUiEngineAttached (false).
  • Restart the TimerTask with onExposed and onUiEngineAttached (true).
  • My DatabaseConnection closed the finally statement.

  However, when I look at the objects in Eclipse BlackBerry objects View when the TimerTask is not running, I still see 1 ~ 4 TimerTask objects and 1 ~ 4 DatabaseConnection objects.

  TimerTask both DatabaseConnection have a static instance (I don't have several entry points) with the following in my class that extends UiApplication:

  public static Timer _timer = new Timer();
  public static Database db = null;
  

  I attribute db when I need it with a call to DatabaseFactory.open within the class that extends TimerTask.

  Now that the business logic is correct, how to improve the design so I don't not leaking memory in every way?

  The statement closed the database is being called in, because I can set a breakpoint and see it has reached.

  Instead of onObscured/etc, you can move them into onVisibilityChange (boolean) is only in one place. Cancel your existing TimerTask before running a new, or at least check the TimerTask reference if you are only creating a... not just passing 'New TimerTask' in the calendar method without being able to track this object reference.

• Switch from a simple Xml call to an rpc-Http call...

  Hello

  I need to go through a simple call from Xml:

  <mx:XML id="urlsGeneral" source="http://www.mySite.com//.../AFS.xml"/>
  

  for an rpc-Http call which updates the display if Xml is changed at any time.

  I forgot to mention the most important and yet very simple point: I need it only to display in a title, etc. and NOT a datagrid or good example below.

  title = "{urlsGeneral.urlGeneral. (()_@name==0).age}

  I tried a lot today, but just can't get it right like id = "urlsGeneral" is always the problem.

  Any help would be appreciated! Thanks in advance. cordially aktell2007

  < urlsGeneral >

  < urlGeneral >

  < name > Jim < / name >

  < 32 > < / age >

  < / urlGeneral >

  < urlGeneral >

  < name > Jim < / name >

  < 32 > < / age >

  < / urlGeneral >

  < / urlsGeneral >

  Another call:

  	< mx:Script >
  		<! [CDATA]
  			Import mx.collections.ArrayCollection;
  			Import mx.rpc.events.ResultEvent;
  			public var myData:ArrayCollection;
  			protected function myHttpService_resultHandler(event:ResultEvent):void {}
  				myData = event.result.urlsGeneral.urlGeneral;
  			}
  		[]] >
  	< / mx:Script >

  	< mx:HTTPService
  		ID = "myHttpService".
  		url = » http://www.mysite.com//.../AFS.XML "
  		result = "myHttpService_resultHandler (Event)" / >

  Best I wanted something like this works:

  	< mx:Script >
  		<! [CDATA]
  			Import mx.rpc.events.FaultEvent;
  			Import mx.managers.CursorManager;
  			Import mx.controls.Alert;

  
  
  
  
  
  
  Import mx.rpc.events.ResultEvent;
  
  
  Import mx.rpc.xml.SimpleXMLDecoder;
  
  
  
  
  
  
  Do not here it is already used in .swc!
  
  
  / * import mx.rpc.http.HTTPService; */
  
  
  
  
  
  
  private var myHTTP:HTTPService;
  
  
  
  
  
  
  private function initConfigCall (): void {}
  
  
  
  
  
  
  
  
  myHTTP = new HTTPService();
  
  
  
  
  
  
  
  
  myHTTP.url = "com/assets/data/changesAppAIRPIOne001.xml";
  
  
  
  
  
  
  
  
  myHTTP.send ();
  
  
  
  myHTTP.resultFormat = "xml";
  
  
  
  myHTTP.addEventListener (ResultEvent.RESULT, resultHandler);
  
  
  
  myHTTP.addEventListener (FaultEvent.FAULT, faultHandler);
  
  
  
  
  
  
  
  
  CursorManager.setBusyCursor ();
  
  
  
  }
  
  
  
  
  
  
  private void resultHandler(evt:ResultEvent):void {}
  
  
  
  
  
  
  
  
  var xmlStr:String = evt.result.toString ();
  
  
  
  var xmlDoc:XMLDocument = new XMLDocument (xmlStr);
  
  
  
  var decoder: SimpleXMLDecoder = new SimpleXMLDecoder (true);
  
  
  
  var resultObj:Object = decoder.decodeXML (xmlDoc);
  
  
  
  
  
  
  
  
  Removed [0] on single node!
  
  
  
  appUpdateAvl.text = resultObj.application.configApp.appNewUpDate;
  
  
  
  appLastChanged.text = resultObj.application.configApp.appLastChanged;
  
  
  
  appChangedSections.text = resultObj.application.configApp.appChangedSections;
  
  
  
  
  
  
  
  
  CursorManager.removeBusyCursor ();
  
  
  
  
  
  
  
  
  myHTTP.disconnect ();
  
  
  }
  
  
  private void faultHandler (event:mx.rpc.events.FaultEvent): void {}
  
  
  
  
  
  
  
  
  var faultInfo:String = "details of the fault:"+ event.fault.faultDetail+"\n\n"; "
  
  
  
  "faultInfo += ' Fault faultString: '+ event.fault.faultString+"\n\n;
  
  
  
  mx.controls.Alert.show (faultInfo, "lack of information");
  
  
  
  
  
  
  
  
  var eventInfo:String = "event target:"+ event.target+"\n\n"; "
  
  
  
  ' type of event eventInfo += ":"+ event.type+"\n\n;
  
  
  
  mx.controls.Alert.show (eventInfo, "Event information");
  
  
  
  
  
  
  
  
  CursorManager.removeBusyCursor ();
  
  
  
  
  
  
  
  
  myHTTP.disconnect ();
  
  
  }
  
  []] >
  < / mx:Script >

  Hi again,

  These days there are more questions than answers on a forum, and very rarely someone sharing the answer if they luck out so here is my answer to the above question is

  Switch from a simple Xml call to an rpc-Http call...

  I got it all along as a commend noted: / / deleted [0] single knot!

  Then, instead of title = "{urlsGeneral.urlGeneral. (()_@name==0).age} it would be now title = "{resultObj. }" {urlsGeneral.urlGeneral. [0] .age} and now it works perfectly well. I hope one or the other of you can use the code and the answer! best regards aktell2007

• Guest account cannot use HTTPS in Internet Explorer

  The machine is Windows 7 Professional 64-bit. It is joined to a domain.

  Recently, I made the active (built-in) Guest account and he gave permission to log on interactively.

  I then connected as a guest, but find that IE would not allow me to open HTTPS web pages. The error message is "Internet Explorer cannot display the webpage." If I click on diagnose connection problems, I get an error:

  An error occurred during troubleshooting:

  A problem to start the troubleshooter.

  Identifier of the package: unknown
  Path: C:\Windows\diagnostics\system\networking
  Error code: 0 x 80096001
  Source: engine
  User: MACHINE\Guest
  Context: Standard

  It doesn't matter what URL I use. He fails for gmail. It fails on my own website.

  The connection succeeds in Firefox, but in 32 - bit and 64 - bit Internet Explorer fails.

  The connection was also successful in IE under different user accounts. I even created another local account called "New customer" and he attributed only to the guests group. With this account, I was able to connect and access through IE HTTPS sites.

  Based on the answers to this problem , I ran "sfc/scannow". He returned with

  Start scanning system. This process will take time.
  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection could not perform the requested operation.

  I followed the suggestions in Troubleshooting . The 9 method returns the same error than to click on the resolution of problems in Internet Explorer. Disabling the firewall had no effect. Reset the Internet Explorer settings had no effect.

  I also made sure to TLS and SSL options have been enabled, but that has no effect.

  I confirmed that on another computer in Windows 7 (this a 32 bit Ultimate, but on the same domain), the guest account can access HTTPS sites with no problems.

  It seems that there is something corrupt on the guest account itself (although it probably uses the same profile, as would new comments).

  What can I do to fix IE under the guest account? Is it safe to delete and recreate the guest account? If I do, what are the implications?

  We had the same problem. We needed to use the guest account because we wanted the account to automatically erase between guest users, but didn't want to deep freeze authenticated our users. For us, the problem was that guest doesn't have read access to HKLM\SOFTWARE\Policies\Microsoft.  Once the comments had read access to this key, both Chrome and IE were able to use the HTTPS protocol.  Also antivirus Microsoft CEP started working again for the guest user.

• Cannot use https wesites due to certificate error

  There was an update to Windows 7 and an update of Firefox 27 today. Unfortunately, I didn't do one at a time.
  First thing I noticed gmail was not correctly display the graphs in the chat window. Then the Firefox Add ons link check - did nothing, just display "Loading Data" and never do anything. I went the Add-ons for my Firefox and it displays the error message "this connection is Untrusted. You asked Firefox to connect safely to services.addons.mozilla.org, but we cannot confirm that your connection is secure. »
  and
  "services.addons.mozilla.org uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer) »

  There is no way to add a certificate exception, so I can't use the addons page. Other websites using the https protocol either do not display correctly or also display the error "this connection is untrusted". I've done almost all proposed on forums and FAQS: I have reset Firefox, I deleted the file cert8.db and other extension files in my profile. I started in safe mode, try a different profile. A clean installed Firefox 26, and I always get this error message.

  I've seen suggestions that had to do with a security installation, which I did not, could there be an equivalent of McAfee?
  I use a company computer and do not have control over the antivirus settings or the proxy.
  I had to install Chrome just to post this question as the button "Ask the question" did not at all on IE.

  Found the solution... Found in a place of info on authorities of certification and checked in Firefox, it turns out that those used by our company (Zscaler) was absent.
  I exported 3 Zscaler certificates of IE and then imported into Firefox. It's working now!

• Cannot access https secure sites after installation of Netnanny

  Use Firefox for years. Then recently installed "net nanny" software and it has changed the security settings on Firefox.

  I can't access all the secure https sites regardless of whether net nanny software is even uninstalled.

  The following alert occurs on Firefox running...
  "Could not initialize component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features. »

  Then when you try to access an https site, I get an error as follows:
  "Secure connection failed".

  An error occurred during a connection to support.mozilla.com.

  Cannot connect securely because the SSL protocol has been disabled.

  (Error code: ssl_error_ssl_disabled) »

  Use SSL 3.0 and use TLS 1.0 are both selected in the "Advanced settings"

  I also left a post on the forum of Net nanny however clearly don't have an adequate response when they talk about a setting in their software ("allow secure content") which is already activated anyway with the uninstalled software, however it still does not solve the problem. In fact, I had to use IE to post on this forum.

  It clearly provided a message when configuring the net nanny that he changed the security settings when Firefox has been executed for the first time for each user.

  I wish I had a solution so I can go back to using Firefox as my default browser and do believe a software application and a well known who, should take a non-functional browser but not another.

  Start with this support article:
  
  https://support.Mozilla.com/en-us/KB/could%20not%20initialize%20The%20browser%20security%20component

• Cannot answer incoming calls

  So, recently, I tried to open Skype and he said "I was already logged on another computer" and I wasn't so I went into the Task Manager and found a Skype program still running and I closed it. Ran of Skype. Put Skype to date. THEN more problems arise. I can answer now is no more incoming calls and I can't call someone. If I try to call someone I'm stuck on the call screen and it never sounds and if they call me im stuck on the screen where they claim even if they are no longer. Now, I can't talk to my friends on Skype and they didn't and don't won't use any other program. Ive tried EVERY Solution I've seen on the posts related to this issue and none of them works.

  Try to update driver Audio Realtek

  http://www.ASUS.com/Tower-PCs/K30BF/HelpDesk_Download/

  Be sure to select the option of 64-bit Windows 10.

• Cannot dynamically include called subVIs in construction

  Hi, I have a VI that calls some Subvi - i.e. by reference dynamcally.

  I am now building an application and loking for this manual for help (I'm using LabView 2012):

  

  This link http://digital.ni.com/public.nsf/allkb/410F2EC66F60F9B0862569EE006F4FA0 has similar instructions:

  

  However, my problem is that I can't click on the arrows in the window. This window for me looks like this:

  

  and no arrows are clickable and no help by adding the dynamic subVIs!  For example, when the application is built, it is malfunctioning.

  Would appreciate any help you can provide on how to address the issue.

  Thanks in advance!

  Hi SensLab,

  When you use a project LV then you would be able to include all the necessary screws when building!

  BTW. Dynamically called screw should be included in the project too...

• Windows Vista cannot access https Web sites

  Hello

  My friend Tommy has an Acer Aspire 5315 with an Intel Celeron 550 CPU and 1 GB of RAM.  Service Pack 2 for Windows Vista HomeBasic runs.  He got the computer in the United Kingdom but lives now in Australia.
  He wants to access his hotmail and facebook messaging, but can't.
  The http sites normal http://google.com/ work very well for him.  However, it seems that whenever he tries to use a Web site by using an https connection, it gets a "Internet Explorer cannot display this webpage" or equivalent.
  It connects via a Huawei E585 Pocket Wifi device - it connects to wifi then broadcasts a wireless internet connection to his computer.  He gets his internet through Vodafone Australia.  I have a similar device - a keen wireless thus N420.  It can also connect through it.  Its problems occur for both devices.  My internet works fine on my computer using my camera.  Therefore, it is not a problem of modem and is an internal problem to his laptop computer.
  
  All his problems occur in the same way for Internet Explorer, Chrome, and Firefox.  So it isn't a browser-specific problem.
  I have disabled the Windows Firewall.  He always gets the error messages.
  It is not * seem * to have a firewall installed, even if it was AVG free anti-virus installed.
  AVG Vault shows that he has been hit by at least 4 Trojan horses in the past.
  His computer is incredibly slow - processing both with the internet.  My internet is too slow, so this is probably due to a bad ISP.
  Web sites that work:
  http://Google.com/
  http://News.Google.com.au/nwshp?hl=en&tab=wn
  http://login.live.com
  http://Facebook.com
  Web sites that does not work:
  https://mail.Google.com/mail/?tab=WM (i.e. that by clicking on "Mail" on the google home page)
  https://login.live.com/ppsecure/post.SRF?BK=1336377356 (i.e. as soon as it hits "Sign In" on the windows live login page)
  https://www.Facebook.com/login.php?login_attempt=1 (i.e. as soon as it tries to connect on facebook)
  In addition the microsoft FixIt to places like:
  http://support.Microsoft.com/mats/windows_firewall_diagnostic
  seem to download, but not work.
  Any ideas on what could be wrong and how to fix it?
  Thank you!
   

  Hello

  1. what version of Internet Explorer you are using?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/956196

  Method 2:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/813444

  Method 3:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/967897

• Cannot make video calls

  Original copy; Title: Vedio call

  Hello!

  Am facing a problem with MSN for the first time, I can send invitations for a vedio call to all my contacts but one of them I can not even find the tab call vedio on my screen, and even he can't invite me! ?????

  Hello

  The question you have posted is related to Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support ask you: http://www.windowslivehelp.com/product.aspx?productid=2

  You can also contact msn customer service by following this link: How to contact MSN Customer Support http://support.microsoft.com/kb/940784

• Http.Call error!

  Hello

  I'm calling a Web service, what he does is just authenticate the user name and password and return a string either 1 or - 1. While debugging, it is locked to httpTransport.call () for like a minute or more, then go to the exception giving error "java.io.InterruptedIOException: Local connection has expired after ~ 120000.

  String ret=null;
   String error=null;
   String SOAPLOGINACTION = "http://nettechltd.net/wwwroot/ttweb/Service1.asmx/Authenticatee";
   String SOAPLOGINMETHOD = "Authenticate";
   String WSDL_TARGET_NAMESPACE = "http://nettechltd.net/wwwroot/ttweb/Service1.asmx";
   String SOAP_ADDRESS = "http://nettechltd.net/wwwroot/ttweb/Service1.asmx?WSDL";
  
   SoapObject rpc = new SoapObject(WSDL_TARGET_NAMESPACE,SOAPLOGINMETHOD);
           rpc.addProperty("username","test123");
           rpc.addProperty("password","test123");
  
      SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
      envelope.dotNet = true;
      envelope.encodingStyle = SoapSerializationEnvelope.XSD;
      envelope.setOutputSoapObject(rpc);  
     HttpTransport  httpTransport = new HttpTransport(SOAP_ADDRESS);
     httpTransport.debug = true;
     httpTransport.setXmlVersionTag("");
  
     try
        {
            httpTransport.call(SOAPLOGINACTION, envelope);
            ret = (envelope.getResult()).toString();
            Dialog.alert(ret);
        }
          catch(Exception ex)
        {       error = ex.toString();
          }
  

  Any suggestions are welcome.

  There may be problem in your net connections, I tried this code and I got-1 as response.

• Cannot connect http - Centennial Wireless

  Hi guys.

  My application cannot connect to the web by HTTP server, when it works with the radio of the centennial.

  Do you know the Centennial wireless uses APN?

  If Yes, what is the APN username and password?

  You have an experience related to this matter (Centennial Wireless)?

  Thanks in advance.

  Hello

  I found this one:

  APN: private.centennialwireless.com
  Username: privuser
  Password: priv

  Thank you

  Bifocals

• Sierra of MacOS - Siri cannot make voice calls.

  Hi guys,.

  Siri is supposed to be able to make phone calls via the iPhone, the Mac, in the Sierra de MacOS?

  Cause I can make phone calls (not the Facetime calls) fine if I use the Facetime on Mac app and click on the phone number, I want to call, or if I take a certain number of Contacts. But if I try to open Siri and make a voice command to "call X", he always tries to do through Facetime. Which means he's trying to make a Facetime call instead of a voice call normal.

  Is this a bug or missing feature? Is there a fix or a workaround for it? I wish I could use Siri on my Mac, just as I do on the iPhone.

  I observed the same behavior, so I think it's a missing feature.

  And page (below) which deals with Siri on Mac shows a command "FaceTime", but not a "Call" command  (As I say, I used the "Call" command and observed the same behavior you did.)

  Use Siri on your Mac - Apple Support