Cannot find the sreensaver on the computer

Similar Questions

• Remote Desktop cannot find the computer

  Try to log on the server is running, I use windows 7 and internet explorer 8.

  I've used several times to link to you connect them to but it is hit and miss, I get the following text:

  Cannot find the computer XXXX

  Check the computer name and domain

  Any help as its very frustrating

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cannot find the computer IPod Nano

  Original title - I Pod Nano

  When you try to connect my new I Pod Nano to my computer which runs windows 8, it essentially says that it cannot find the I Pod.  Any ideas?  I installed I tunes, uninstalled and installed again.  No luck.

  Hi Judy,.

  I suggest you try the steps from the following link:

  iPod not recognized in my computer and in iTunes for Windows
  http://support.Apple.com/kb/ts1369

  Note: Make sure that you reset the computer to normal mode, once the troubleshooting is complete.

  iOS: device not recognized in iTunes for Windows
  http://support.Apple.com/kb/ts1538

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Scanner (Officejet 7500) cannot find the computer when you use shortcuts scan to printer

  When you choose Scan to PDF, e-mail, etc., by using the scanning on the 7500 buttons it allows me to select the computer on the network (each with all of the latest drivers and software loaded). However when about to the scanner and then says the computer is not found (whatever the) despite them being on and ready. Scanning by any other method of the Mac works. Automator shortcuts work very well during the tests, but they do not seem to get initiated by the scanner for scanning form of initiation of the printer itself.

  Research on the support site HP and conclusion - a 'connection error' or "Computer no. detected" Error Message displays when trying to Scan from the printer control panel - as a subject gives PC solutions, but nothing for Mac. And so here I am. Help!

  JKB

  The next thing to check is that "HP Device Monitor" is running.  This background process is responsible for detecting the keys for scanning applications.  If you open the activity monitor (located in/Applications/Utilities) you should see this class as one of the running processes.

  It may be generally preferable for you to perform an uninstall and reinstall the HP software.  You will find in Applications/Hewlett-Packard HP Uninstaller.  Use this utility to remove the old software.  I recommend that you download and install the latest version of the software for your 7500 here: http://tinyurl.com/4voly2d.

  Hope this helps,

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Imaging a computer error, "the system cannot find the file specified."

  I tried an imaging machine and it fails because "the system cannot find the specified file" I can boot and crossed to the file, the system does not find.  If I remove the file from the location and try to reimage the machine, he succeeded. And I need this file on the machine, why would that be?

  Hello K.C.Clayton,

  Thanks for the return of the response.  Because you're imaging a computer Server 2003, it would be better displayed on the Microsoft TechNet forums.

  Systems Management Server 2003

  http://social.technet.Microsoft.com/forums/en-us/SMS/threads

  Thank you

  James

• Not able to repair Windows XP computer error cannot find the file [e1e5132.sys].

  Original title: need help to use the repair feature when you use the disk of resettlement for XP Media Center 2005.

  I cannot using the repair on Windows XP Media Center 2005 feature.  I started the repair process and enter the installation phase, but the installation stops because it cannot find the file [e1e5132.sys] which is a Windows\System32 folder.  I managed to download a Pack which included the file (using another computer), but I can't properly cancellation of the installation in order to install the file in the appropriate location.  Whenever I try to restart the computer, it goes immediately to this part of the installation of the repair process.  Even when I try to restart without reinstall into the CD drive; When the reinstallation disk is removed and I try to restart, it requires me to insert the disc to continue to the reinstall.  Help - How can I back out of the reinstall, so that I can add the missing file first?

  Hi Stephdan,

  1. have you done any hardware changes or software on your computer before this problem?

  2. Why are you trying to fix the computer?

  It would be possible that the Windows XP installation disc is damaged.

  (a) you can try to do a Windows XP disk which should correspond to the same edition, as it is installed on your machine.

  (b) later, try to repair the installation and check if you are able to boot to the desktop normally.

  Perform a repair Installation

  
  Note: however, you should not have Service Pack 3 installed on the computer before you run repair installation.

  Hope the helps of information.
  Please post back and we do know.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Old computer is dead, have the disc Lightroom cannot find the serial number, I got when I bought the software.  Where can I get the old one or new to load my software?

  Old computer is dead, have the disc Lightroom cannot find the serial number, I got when I bought the software.  Where can I get the old one or new to load my software?

  Hi Peter,.

  Please check the help below document:

  Quickly find your serial number

  In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts

  Kind regards

  Sheena

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Mini 101NR - restore to fail, error message "cannot find the file.

  While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.

  I tried the options "install fresh copy" and "repair" and get this same error message in both directions.

  I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?

  I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.

  I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.

  This OSD provided with the computer when I bought it new at HP.

  Thank you

  Peter

  The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.

  http://support.Microsoft.com/kb/q311755/

• Satellite A665 - 12K: BT does not work - cannot find the remote service

  Hello!

  Help solve the problem,

  Computer laptop A665 - 12 k connected via bluetooth devices, bluetooth Manager finds the device, but do not connect it gives an error 'Cannot find the remote service' before you reinstall windiws solved similar problems 7. Did you reinstall driver broadcom, resettlement (ver.8, ver.9) bluetooth stack, clean the registry, windows 7 the relocation does not contribute to what either.. .Please help!

  Hello

  I recommend you to check the services that are running in the background.
  The point is that if BT service is not running or is not enabled, the BT connection cannot be established.

  To check the service appointment on: Control Panel-> administration-> computer management tools
  or you can directly open the Services' list by typing services.msc command in RUN or Start Menu search box.

  No, you will get a list of available services. Search for services called Bluetooth and activate this service by double-click a service and select the option you want.

  Then try to reactivate the BT using the FN + F8 key combination

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.