cannot get mail out with comcast using windows 7, outlook 2010.

Similar Questions

• Using Windows 7 Outlook 2007 get more "not responding" just as with Vista.

  Original title: "Using Windows 7 Outlook 2007 put in more and more"not responding"just as with Vista." "Outlook pst file corrupt again and looks like I'm carefree like that again - not a very technical user here"

  Recently, I installed 7 due to problems with Vista. Prompted by crashing in Outlook 2007. Began with "does not" message and now I'm getting the same thing with 7. "» The last time it happened that I found the corrupted pst file and decided to skip the Vista and support 7. Love 7 (as turning on your TV in comparison) but get the same message. Outlook runs slow again and don't know what to do now.

  Hi JackinGeorgia,

  Welcome to the Microsoft Answers site!

  Are you facing this problem only with Outlook or any other program as well?

  It seems that some background programs is in conflict with the proper functioning of Office Outlook 2007. You can try to put your computer in a clean boot and check the base program leading Outlook hang.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note:

  Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our

  Microsoft answers Feedback Forum and let us know what you think.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• I have cs3 and cannot get to work on 8.1 windows.  Can I download a trial version of fireworks and use my product for full activation key?

  I use only Photoshop and Fireworks of my CS3 cd.  It is not compatible with 8.1 windows.  Can I download a trial of fireworks from the Adobe site and activate using my product since the original cd key?  I looked for patches and nothing helped.  Please help me with what I need to make prints of my paintings in oil.

  I rarely use Fireworks for print, but rather to render or my perfect images.  I used Fireworks for about 17 years and just uncomfortable with it.  I use Photoshop as well and see the simularities.  I see the writing on the wall with Fireworks going perhaps for the warmer, but still uncomfortable with it.  I received my original cd from Macromedia to my son as a gift and another gift years later.  I run a new art form, 'Conceptual Art' on my site and require Fireworks.  Maybe its time to spend on Photoshop, I'll see.  Thank you for your reply and your time. http://www.baywoodgallery.com/

• Cannot get administrator access to download the Windows 8.1 upgrade

  Hello.

  I have a new XPS8700.  I was able to download the Windows 8.1 since the MS. Store upgrade  My first problem is the lack of updates from Windows, I did, and now I can see the 8.1 update in the store.  I can also download updates to other access points.

  My problem is a continual notice whenever I hit the download that I must log in to an account with admin access.  Best I can tell, this and other forums have shown me how to add the Admin feature with the command prompt.  I even created a second account and did the same thing.  In the summary screen of the user in the Control Panel, the two users show "administrator."  But I still can't access

  I tried "net user administrator / Active: Yes" but also tried the same thing with permutation of my name for the administrator

  The real ' administrator' user cannot do anything in the App Store.  This seems to be what's supposed to happen.

  Does anyone have advice?

  Very frustrating to say the least

  Sounds like a bad set-up. I would advise to uninstall KB2871389 and put it back manually. Also uninstall McAfee and then retry the update.

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/upgrading-to-Windows-8-1-from-Windows-8-0-via-the-Microsoft-store/

  I also recommend asking a reinstallation DVD Windows 8 of Dell.

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/request-a-reinstallation-DVD-from-Dell/

  Personally, I prefer a clean install and certainly have a way to clean install would be beneficial to you if you are having these problems with the factory settings. For instructions on how to clean installation guide reinstalling Windows / A Clean install of Windows 8.1:

  http://dellwindowsreinstallationguide.com/

  Unfortunately, the combination of policies (blocking Windows 8.1 media to accept product keys Windows 8.0) Microsoft and Dell systems with Windows 8.1 not marketed is problematic for the end user. Dell won't be able send you reinstalling Windows 8.0 media. If you can get your hands on the Windows media 8.1, then you can clean install with him using the following arounds:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-8-1/Microsoft-product-activation/

  Note If you ask to request installation media the DVD and not the USB as DVD can contain additional Dell drivers that may cause problems similar to the factory settings.

• HP xw6200 workstation - cannot get to BIOS with F10 Setup screen

  HP xw6200 workstation - cannot get to the configuration screen of the BIOS with the question of the language with F10.  Because of a mental lapse, I turned on the SATA RAID Option ROM.   System fails to start on the C drive. It turns out that the system has an Adaptec 1420SA SATA HostRaid map three discs. I see now three readers at the start after I enable readers to show in the Adaptec utility. Two of the disks are configured in RAID 1 Boot on the C: drive.  He could not see the third disc in Windows Explorer, only the C: drive.

  At startup by pressing F10 I have only three options:

  1 Ethernet Boot Agent

  2 RAID Adaptec Configuration utility

  3 Intel RAID for Serial ATA

  My question is "How to get back in the BIOS to achieve the Advanced tab to disable the RAID SATA ROM Option?"

  This article is similar to your problem.  I would try to clear the CMOS memory.  If you open your PC, you should find a rider to move that will define your CMOS to default values.  When you move the jumper, let up for a minute and then bring it back.  If you can't find the jumper then try to remove the CMOS battery for a minute then replace.

• Cannot connect Blackberry mobile access point using Windows computer.

  Original title: connection problem

  I use windows 8 on my hp15 and also a cell phone blackberry q10... I noticed that the hotspot from my phone does not appear on the windows network. but hotspot of the else phone shows and connects perfectly well and my q10 hotspot shows and connects on their own computer... any idea on what could be the problem?

  Hi Adam,

  Thanks for posting the query on Microsoft Community.

  If I understand correctly, you are unable to connect the mobile access using Windows computer point. Don't worry, we will help you with the question. It could be matter of settings.

  Manage the network and other utilities mentioned in the link below and check if it helps.

  Why can't connect me to a network? :

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Also try the other steps in the link below.

  Mobile broadband from end to end:

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  For reference:

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB31857&sliceId=2&DOCTYPE=KC&noCount=true

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/55574/mes1342811963579.jsp

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Web Client connection with the "Use Windows logon credentials" error

  Hello

  I tried to configure vCenter Server appliance (suse) 5.5.0b.

  I created a user in the console of bash and permissions added to it with access complete the server vcenter (with multiplication), added to the Group administrators and users etc.

  When I manually enter credentials to connect it let me, but when I check the "Session using Windows credentials" box produces an error message:

  «The authentication server has returned an unexpected error: ns0:RequestFailed: IDM threw an unexpected error during authentication: platform Native Error [code: 1213] [] [ERROR_INVALID_SERVICENAME].» The error can be caused by a source of identity with a malfunction. »

  I have the same credentials on my computer as in vcenter (the two without configured AD) [this works with vcenter on windows 2008 server].

  I heard it could be the problem of the lack of reverse dns lookup, but I works perfectly.

  vCenter server and dns server are on the same subnet.

  I know there is already a discussion on this error, but the solution is not sufficient (I use American English characters and as I already said - it works on different vcenter).

  Can anyone help?

  Thanks in advance!

  Here's what I got from support that clarifies the case:

  "Design when we choose 'References using Session Windows' respective user name and password is sent to vCenter using the Kerberos authentication protocol that only works when the Client and server are joined to a common domain.

  The reason why we are getting the error reported in your environment is that key Kerberos for the host of the server vCenter application are missing from the/etc/krb5.keytab file. So, I confirm that we will not be able to make the "Session using Windows credentials" option to work in Client and server only not part of the domain.

  To learn more on Kerberos authentication, see Microsoft Link below.

  http://TechNet.Microsoft.com/en-us/library/cc780469 (v = ws.10) .aspx

  "

• Cannot get rid of the empty Capture window

  I've been video capture from VHS tapes to a VCR by a Canopus ADVC-55 analog-to-digital converter.  I use Windows 7.  It worked OK, but at one point, first Elements 9 froze when taking and I aborted it via Task Manager.  When I reopened it PE9 a capture window empty blocking work area appeared (see Figure).  The window cannot be closed or moved, but can be resized.

  I have made several attempts to get rid of him.

  -J' started another video capture, which opened a new capture window without getting rid of it empty.

  -Starting a new project doesn't have a window.

  -J' uninstalled and reinstalled PE9.  The empty window always opens when I start the program!

  The program is still usable by resizing the window to small so large that I can access the controls, but I would appreciate any advice to get rid of the stupid thing.

  

  Welcome to the forum.

  It's a new one on me.

  First thing I would do would be go to the fenΩtre > reset the workspace and we hope that it clears.

  Hope that helps and good luck,

  Hunt

• Girl just got a new Iphone6s 9.3.1 and can't access his e-mail.  Gets the message "Cannot Get Mail the username or password of"Gmail"is incorrect."  Obviously, we did something wrong... anyone knows how to fix this?

  My daughter just upgraded to an iPhone 6s.  She is not able to receive or send emails... Besides, she can't still access his Messages.  Earlier, the phone wants to switch to 9.3.5... will it solve this problem of e-mail?

  Go ahead and upgrade to same 9.3.5 so that will probably not solve the problem of electronic mail (additional security is important). Then try to reset your email account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider, click the account, and the blow to remove. Then restart the unit. Then go to settings > mail... and to add the account. Follow this:

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple Support

• Cannot get on Internet with computer Vista, getting 169 ip address

  We have a problem with Vista my boyfriend. He said that everything was working fine yesterday, and then we left for lunch. He thought that he turned off the computer, but when we came back he was and would not connect to the internet. We first thought it was a bad cable so went out and got a new but no change. I also tried to use the cable from another computer but still can't connect. We get a 169 ip address and the network shows as Public unidentified network with limited connectivity. We have tried to change for private network but always presented as identified and unable to connect to the internet network. I'm sure that yesterday we have a 192 ip address and the address of a default gateway and succeeded to another computer on the network but still could not get on the internet, but failed to get the IP 192 today. I'm confused, what is happening. Help, please!

  More information - Vista computer also has a wireless adapter that when activated, it works but we have the connection Ethernet also works. I tried to connect with the mode safe mode with networking, but get the same thing. I thought to reset tcp/ip, but given that the wireless adapter is able to connect, does that mean tcp/ip works on the computer and running that a fix would be a waste of time? I don't want to do anything that could screw up the wireless adapter. Ethernet is on board so that it cannot be let go and need to reinstall. Any ideas will be greatly appreciated!

  Thanks for your reply. I tried to remove the network adapter from Device Manager and allowing windows to reinstall but it does not solve the problem. It is a desktop computer. I started to think about how the cable could have been pulled and could have damaged the Ethernet port and was going to ask you what the lights where the cable plugs into the Ethernet port average. It's a green light solid with a yellow flashing light next to him. I decided to shut down the computer and blow the Ethernet port with compressed air. To my surprise, it works now! Although your answer directly does not solve my problem, it helped me not to do things that do not help and he will think the Ethernet port and what could be wrong with it.

  Thank you!

• Cannot send email stuck in Outbox using Windows 7

  I just Windoows 7.  I get no problem, but I cannot send email the.  They are all stuck in my Outbox.  Please help me with this.

  Thank you

  I just Windoows 7.  I get no problem, but I cannot send email the.  They are all stuck in my Outbox.  Please help me with this.

  Thank you

  1. first thing first...
  Open your e-mail program > in the menu bar above, FILE > work offline.
  Now let's see if you can remove those blocked e-mails.

  2. what email program are you using? Win 7 is your operating system, operating system, not an e-mail program.

  3. try to send a message is for you with the same e-mail address. You will receive an error message. Post this message in its entirety... verbatim. Do not use your own words, the message must be an original.

  t-4-2

• Cannot get rid of the pop up windows

  Hi, I removed my Media Gallery because if gave me a lot of errors, or it would freeze my computer.  I went and deleted all VAIO applications because I do not use them, but now I get this message "Windows cannot find ' C:\Program Files (x 86) \Sony\Media".» Make sure you typed the name correctly and then try again. »

  Hey Brenlizz,

  What could be the problem, is that the program tries to start at startup, but since it is impossible to find the program error occurs.

  A solution would be:

  Open the start menu and type "msconifg" into the search bar. That must put in place the program system Configurtion.

  Go to the Startup tab and look for all programs with the VAIO or Windows Media Gallery.

  If you are able to find them, uncheck the box for this problem, it should disable start at startup, and hit apply.

  This should fix the pop up question.

  I hope this has helped!