cannot get my dv9000 9817 cl vista o/s with discs of hp (1 & 2)

Similar Questions

• After changing the settings of the mouse, cannot get rid of ClickLock in Vista

  In order to fix my mouse, I went a mouse in the control panel and checked the ClickLock. Restarting the computer fixed my problem of mouse, but now I'm stuck with the ClickLock and can't get rid of it. I tried to go back to the mouse in the Control Panel, but now a completely different with different options screen and no lock click box rises.

  Hi CBerger,

  Please let us know what happened when you try another suggestion of Lórien:

  "You may be having problems with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  "If you need to get drivers (and you shouldget latest drivers, firmware, or software for your mouse at least and all you have time to do - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot get my Acer X223W monitor widescreen (DVI + HDMI with adapter Apple) to show anything.

  Separated from this thread.

  Yes two years late.

  I went to the Acer site to try to find the updated drivers for my Acer x223w LCD monitor, but the only driver, they offered was for the 32-bit version of windows.  Where did you get the 64 bit version.

  I'm having a similar problem where the display does not indicate a signal from a DVI - D port on my motherboard (Asus Z97 Pro (wifi) with a processor of 4790 K with HD 4600 video intel).  However, it will be a 'Digital' signal when I connect it with the same cable to a passive adapter plugged into the display port.

  So I was looking for a solution to this strange cannot read a DVI - D signal for some reason any.  And Yes, all pilots are supposed to be updated.

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  This problem could occur due to corrupted drivers.

  I suggest you to check with the Acer support, if they have a driver updated 64-bit for Windows 8.
  http://us.Acer.com/AC/en/us/content/service-contact

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Cannot get the stream being the custom when integrating with ISDK 20.2.3 Action

  Hello

  I'm trying to integrate my project with Autovue using ISDK 20.2.3. When you try to view a document I could not get the flow in my custom action process. Ideally, the stream should come in the execute method of the CustomOpenAction class that is saved in the web.xml file. At the start of my application server, I get the below error. I suspect that this could be the reason for not having flow in my class of the Custom Action. Do we need to define an additional property or the path beforehand.

  Since the log below, it is obvious that listing other elements go well.

  Please help get the flow of my custom classes so that I can continue my development.

  INFO [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -> com.primavera.integration.autovue.DMSVuelink@6fbab89e::init()

  INFO [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Initialzing Decrypter... (Please wait)

  INFO [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Initialized Decrypter.

  INFO [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Vuelink has been activated to connect using SSL.

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -context record DMS

  ERROR [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?)-failed to verify or update null java.lang.NullPointerException

  at java.util.Hashtable.put(Hashtable.java:514)

  at com.cimmetry.vuelink.context.GenericContext.setInitParameter (unknown Source)

  at com.cimmetry.vuelink.Vuelink.registerDMSContext (unknown Source)

  at com.cimmetry.vuelink.Vuelink.init (unknown Source)

  at com.primavera.integration.autovue.DMSVuelink.init(DMSVuelink.java:22)

  at javax.servlet.GenericServlet.init(GenericServlet.java:240)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:337)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:288)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.StubSecurityHelper.initServletInstance(StubSecurityHelper.java:98)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:86)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:71)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:57)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:31)

  at weblogic.servlet.internal.ServletStubImpl.initStubLifecycleHelper(ServletStubImpl.java:660)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:600)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1979)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1956)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1846)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2876)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1661)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:823)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:360)

  to weblogic.application.internal.ExtensibleModuleWrapper$ StartStateChange.next (ExtensibleModuleWrapper.java:356)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.ExtensibleModuleWrapper.start(ExtensibleModuleWrapper.java:138)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:124)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:216)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:211)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:73)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:24)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:729)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)

  at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:48)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:226)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:418)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:210)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:118)

  at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)

  at sun.reflect.GeneratedMethodAccessor6.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)

  at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)

  at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)

  at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)

  at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)

  at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)

  at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)

  at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)

  at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)

  at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)

  at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)

  at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)

  at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)

  at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)

  at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)

  at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)

  at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)

  at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)

  at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)

  to org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$ QueueRunner.oneJob (CurrentTaskFuture.java:1162)

  to org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$ QueueRunner.run (CurrentTaskFuture.java:1147)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:548)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -DMS saved context: com.p

  rimavera.integration.autovue.context.DMSContextImpl

  DEBUG [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -actions of the DMS registration

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionSave

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionSetProperties

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionGetProperties

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionDownload

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionDelete

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -Registered DMS action com.pri

  mavera.integration.autovue.actions.DMSActionOpen

  DEBUG [[ACTIVE] ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -registered stock DMS

  INFO [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (?:?) -<-com.primavera.integratio

  n.autovue.DMSVuelink@6fbab89e::init()

  ==========================================================================================================================

  This means generally that the deployment descriptor is not properly built

  Please check the deployment descriptor and please make sure that all required arguments are entered

  This is nothing new, as the ISDK 20.2.3 is the SAME as previous versions

• Cannot get cs6 to load on my macbook pro with os 10.9.5

  I was able to get downloaded on my computer, but on installation it tells me that I need software of adobe to assess support what is wrong.

  This software is no longer available.  any ideas?

  Thanks in advance...

  Thanks for your help, but never could get to go.  Finally hung laptop on the desk and was able to migrate over.  very very very frustrating...

  Thank you for your help, much appreciated.

• Cannot get the value of capacity or free space with vCO vCenter plug-in 5.5.1

  
  Hi all

  As indicated in the title, as I migrated my devices vCO to vCO 5.5.1 (connected to 5.0 vCenters) 5.1 (connected to 5.5 Server devices vCenters) capacity and freeSpace from a given data store fields always show 0GO as value (although the provisonnedSpace displays a correct value).

  I tried to use the datastore.summary.capacity and datastore.summary.freeSpace properties, but they always return a value of 0.

  Are these properties obsolete or unusable with the 5.5.1 plugin?

  Thank you for your help.

  BZ

  Usually resolves such issues with lack of properties or values not updated, you should:

  1. take the latest technical preview of the plugin by (Version of technical overview of VMware vCenter Orchestrator plug-in for VMware vSphere 5.5.x)

  2 disable the inventory service in setting the property "com.vmware.o11n.vim.useInventoryService" to "false" (in vmo.properties).

  • Ability to disable the use of the service of inventory by setting the value of the java system property "com.vmware.o11n.vim.useInventoryService" to "false" (in vmo.properties).

  It will be useful.

• HP xw6200 workstation - cannot get to BIOS with F10 Setup screen

  HP xw6200 workstation - cannot get to the configuration screen of the BIOS with the question of the language with F10.  Because of a mental lapse, I turned on the SATA RAID Option ROM.   System fails to start on the C drive. It turns out that the system has an Adaptec 1420SA SATA HostRaid map three discs. I see now three readers at the start after I enable readers to show in the Adaptec utility. Two of the disks are configured in RAID 1 Boot on the C: drive.  He could not see the third disc in Windows Explorer, only the C: drive.

  At startup by pressing F10 I have only three options:

  1 Ethernet Boot Agent

  2 RAID Adaptec Configuration utility

  3 Intel RAID for Serial ATA

  My question is "How to get back in the BIOS to achieve the Advanced tab to disable the RAID SATA ROM Option?"

  This article is similar to your problem.  I would try to clear the CMOS memory.  If you open your PC, you should find a rider to move that will define your CMOS to default values.  When you move the jumper, let up for a minute and then bring it back.  If you can't find the jumper then try to remove the CMOS battery for a minute then replace.

• Whenever I try to access anything on my computer I get this message: WINDOWS CANNOT FIND... IN VISTA

  Original title: WINDOWS CANNOT FIND... IN VISTA

  I get this message every time I try to access anything on my computer.  How can I fix that, please?

  Hi PamatuNoLastName

   

  1. when exactly you get the message?
  2. that you get the message using the search option?

  
  You can check if the steps in the Microsoft article assistance provided below solve you the problem-

  http://support.Microsoft.com/kb/932989

   

  I hope this helps.

• Cannot get digital ID

  * - Original title - digital ID

  Cannot get the digital ID when accepting/sending email via Windows Mail. How do I do that >

  Hello

  1. did you make the changes recently hardware or software on the computer?

  2. What is the error message you get when the digital ID fails to get?

  Try the steps in this article.

  Using digital IDs to sign or encrypt Windows Mail messages: http://windows.microsoft.com/en-US/windows-vista/Using-digital-IDs-to-sign-or-encrypt-Windows-Mail-messages

  I hope this helps.

• How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  Hello

  You don't say which edition of Vista you are using.

  Vista Home Basic Edition does not have the "snipping tool".

  If you have a different edition of Vista, read the information on how to find it:

  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  If you have one version of Vista, other than the Home Basic edition, you already have the Snipping Tool screenshot utility: click on Start, all programs, accessories, Snipping Tool. If you do not see here, it cannot be activated. Go to the Control Panel and open programs and features (you may need to click programs first). In the left pane, click Windows turn features on or off. If necessary, click continue when you are prompted by user account control. Scroll down the list of features, check the box next to Tablet PC optional components, and click OK. Marketing of these features gives you not only the Snipping Tool, but also input panel Tablet PC, Windows Journal and other features related to the stylus.

  "Install or activate the cutting tool in Windows Vista"

  http://www.mydigitallife.info/install-or-enable-Snipping-Tool-in-Windows-Vista/

  See you soon.

• I ran all virus time and time again and that you cannot get rid of this e-mail worm that continues to advance.

  I ran all virus time and time again and cannot get rid of this e-mail worm that continues to move forward, what I can do now, stop using hotmail?

  Hello

  Why do you think you have an e-mail worm? If you can't name it?

  If someone is Spoofing emails that appear to come from you then they probably never
  had access to your e-mail account. Instead, they have either a copy of your contacts
  list or just an email from you or one of you where you were one of the recipients. Those
  could be gleaned either your computer, the computer of a friend, or hacking
  any site or intercept an email on your behalf or to you (you may not be the main)
  (beneficiary).

  Once they have this information there is nothing you can do to avoid that they don't
  send usurped messages. Warn your friends that is happening and they
  can be entitled to install rules such as parodies are treated as SPAM or JUNK
  mail.

  I've even seen usurped by email that appears to be from a valid user name however
  This name doesn't have an e-mail account on the mail system used in parody.
  As SpiritX - AT - realmail.com may be a valid account, however, parody used
  SpiritX - AT - wrongmail.com. The latter could still be considered an email address valid
  SpiritX if it was allowed through JUNK and JUNK e-mail filtering. (The - AT - has been used
  instead of so that those addresses would not be filtered by auto responses.
  as if by magic.)

  ============================================================

  Proceed to a very thorough check for malware and then change your password by e-mail.

  The reason why you want to do this is to make sure no more hacking your computer is
  still in effect (if it has been hacked). You have changed the password once but I would
  Change it again after these checks.

  It is possible for a person to send the email that 'seems' to be of your
  account but that is not really - called "Spoofing." That means its 'Possible' emails
  were not really you, although they may have your contact list. Have someone
  who receives the e-mails to check the header to see where he is actually sent by and
  NOT only the answer to the address.

  How to read the message headers
  http://www.emailaddressmanager.com/tips/header.html

  What Email Headers can tell you about the origin of Spam
  http://email.about.com/cs/spamgeneral/a/spam_headers.htm

  E-mail spoofing
  http://en.Wikipedia.org/wiki/E-mail_spoofing

  E-mail spoofing and Phishing
  http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

  Understanding E-mail Spoofing
  http://www.windowsecurity.com/articles/email-spoofing.html

  Fraudulent emails (false)
  http://pages.eBay.com/education/spooftutorial/

  Google search - email Spoofing
  http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

  =============================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ========================================

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you should ask your questions there if the above do not help resolve.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot install Windows Update in Windows Vista error 800F8016

  Original title: 800F8016

  Hi, I can't download the updates from microsoft, they all fail.    I get the code 800F8016 but can't find answers online... Help, please

  Hello

  1. you did it before the issue of any material changes or software?

  Method 1: Follow the steps in the article mentioned below.
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: Boot your system in clean boot mode. Check if you are facing the similar question in this mode as well.

  Step 1: Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Method 3: Follow the steps in the article mentioned below.

  Problems with the installation of the updates:.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756) how to back up and restore the registry in Windows

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Photos appear white and cannot get images to display on the photos

  Original title: I CANNOT GET PICTURES TO DISPLAY ON THUMNAILS, THEY APPEAR as WHITE, WITH a RECORD #, WHY?

  WHEN I NAVIGATE TO UPLOAD PICTURES, MY PICTURES APPEAR IN WHITE, WITH A FILE # BELOW THEM, I CAN'T S EE THE MINIATURE OF THE PHOTOS, I DID CHANGE SOMETHING?

  Hi marvin z..

  1. are you using Windows Photo gallery?

  2. were you able to view a thumbnail preview?

  2. you remember to make changes to the computer before this problem?

  You need enable preview of thumbnails in the navigation pane.

  a. open the pictures folder by clicking the Start button, click photos.

  b. in the Navigation pane, click the folder that contains the images that you want to display.

  All images in this folder are displayed.

  c. click on the arrow next to the view button and then move the slider to change the size of thumbnails.

  Check out the link:

  View and print picture thumbnails

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-print-picture-thumbnails

  Also check out the link:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ODI11 &gt; jdbc cannot get the connection exception Jdbc - HELP!

  Dear
  
  I'm doing a conexion a new installation in the 11 ODI, in a new machine.
  
  which occurs when you try to configure the connection to the moment that will define the repository of the work, the following error occurs.
  ==
  Parameters
  ODI user and password - OK (checked and is correct)
  The repository and master user password - ok (checked and is correct)
  List of drivers - oracle.jdbc.OracleDriver
  URL >
  JDBC: oracle: thin: @ (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = sss.rrr3.ttttj.ggg.br) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = RRR3)))
  
  and
  Error text >
  oracle.odi.core.config.MasterRepositoryResourceFailureException: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is java.sql.SQLException: Exception when the connection: oracle.ucp.UniversalConnectionPoolException: cannot get data Source connection
  at oracle.odi.core.repository.Repository.getMasterRepository (Repository.java: 74)
  at oracle.odi.core.OdiInstance.createMasterRepository (OdiInstance.java: 501)
  to oracle.odi.core.OdiInstance. < Init > (OdiInstance.java: 553)
  at oracle.odi.core.OdiInstance.createInstance (OdiInstance.java: 529)
  at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.jButtonRepository_ActionPerformed (SnpsDialogLoginDetail.java: 1209)
  at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.connEtoC9 (SnpsDialogLoginDetail.java: 394)
  com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.access $ 15 (SnpsDialogLoginDetail.java: 390)
  com.sunopsis.graphical.dialog.SnpsDialogLoginDetail to $ IvjEventHandler.actionPerformed (SnpsDialogLoginDetail.java: 186)
  at javax.swing.AbstractButton.fireActionPerformed (AbstractButton.java: 1995)
  javax.swing.AbstractButton to $ Handler.actionPerformed (AbstractButton.java: 2318)
  at javax.swing.DefaultButtonModel.fireActionPerformed (DefaultButtonModel.java: 387)
  at javax.swing.DefaultButtonModel.setPressed (DefaultButtonModel.java: 242)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (BasicButtonListener.java: 236)
  at java.awt.AWTEventMulticaster.mouseReleased (AWTEventMulticaster.java: 272)
  at java.awt.AWTEventMulticaster.mouseReleased (AWTEventMulticaster.java: 272)
  at java.awt.Component.processMouseEvent (Component.java: 6267)
  at javax.swing.JComponent.processMouseEvent (JComponent.java: 3267)
  at java.awt.Component.processEvent (Component.java: 6032)
  at java.awt.Container.processEvent (Container.java: 2041)
  at java.awt.Component.dispatchEventImpl (Component.java: 4630)
  at java.awt.Container.dispatchEventImpl (Container.java: 2099)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.LightweightDispatcher.retargetMouseEvent (Container.java: 4577)
  at java.awt.LightweightDispatcher.processMouseEvent (Container.java: 4238)
  at java.awt.LightweightDispatcher.dispatchEvent (Container.java: 4168)
  at java.awt.Container.dispatchEventImpl (Container.java: 2085)
  to java.awt.Window.dispatchEventImpl (Window.java: 2478)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.EventQueue.dispatchEvent (EventQueue.java: 599)
  at java.awt.EventDispatchThread.pumpOneEventForFilters (EventDispatchThread.java: 269)
  at java.awt.EventDispatchThread.pumpEventsForFilter (EventDispatchThread.java: 184)
  at java.awt.EventDispatchThread.pumpEventsForFilter (EventDispatchThread.java: 178)
  java.awt.Dialog to $1. run (Dialog.java: 1046)
  java.awt.Dialog at $3. Run (Dialog.java: 1098)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Dialog.show (Dialog.java: 1096)
  at java.awt.Component.show (Component.java: 1563)
  at java.awt.Component.setVisible (Component.java: 1515)
  to java.awt.Window.setVisible (Window.java: 842)
  at java.awt.Dialog.setVisible (Dialog.java: 986)
  at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.snpsInitializeDisplayAll (SnpsDialogLoginDetail.java: 1475)
  at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.snpsInitialize (SnpsDialogLoginDetail.java: 1421)
  at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.initialize (SnpsDialogLoginDetail.java: 1096)
  to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail. < Init > (SnpsDialogLoginDetail.java: 230)
  to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail. < Init > (SnpsDialogLoginDetail.java: 208)
  at oracle.odi.ui.LoginFactory.createLoginDetailDialog (LoginFactory.java: 218)
  at oracle.odi.ui.LoginFactory.createNewLogin (LoginFactory.java: 291)
  at com.sunopsis.graphical.dialog.SnpsDialogLogin.jToolBarButtonNew_ActionPerformed (SnpsDialogLogin.java: 853)
  at com.sunopsis.graphical.dialog.SnpsDialogLogin.connEtoC1 (SnpsDialogLogin.java: 166)
  com.sunopsis.graphical.dialog.SnpsDialogLogin to $ IvjEventHandler.actionPerformed (SnpsDialogLogin.java: 120)
  at javax.swing.AbstractButton.fireActionPerformed (AbstractButton.java: 1995)
  javax.swing.AbstractButton to $ Handler.actionPerformed (AbstractButton.java: 2318)
  at javax.swing.DefaultButtonModel.fireActionPerformed (DefaultButtonModel.java: 387)
  at javax.swing.DefaultButtonModel.setPressed (DefaultButtonModel.java: 242)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (BasicButtonListener.java: 236)
  at java.awt.AWTEventMulticaster.mouseReleased (AWTEventMulticaster.java: 272)
  at java.awt.AWTEventMulticaster.mouseReleased (AWTEventMulticaster.java: 272)
  at java.awt.Component.processMouseEvent (Component.java: 6267)
  at javax.swing.JComponent.processMouseEvent (JComponent.java: 3267)
  at java.awt.Component.processEvent (Component.java: 6032)
  at java.awt.Container.processEvent (Container.java: 2041)
  at java.awt.Component.dispatchEventImpl (Component.java: 4630)
  at java.awt.Container.dispatchEventImpl (Container.java: 2099)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.LightweightDispatcher.retargetMouseEvent (Container.java: 4577)
  at java.awt.LightweightDispatcher.processMouseEvent (Container.java: 4238)
  at java.awt.LightweightDispatcher.dispatchEvent (Container.java: 4168)
  at java.awt.Container.dispatchEventImpl (Container.java: 2085)
  to java.awt.Window.dispatchEventImpl (Window.java: 2478)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.EventQueue.dispatchEvent (EventQueue.java: 599)
  at java.awt.EventDispatchThread.pumpOneEventForFilters (EventDispatchThread.java: 269)
  at java.awt.EventDispatchThread.pumpEventsForFilter (EventDispatchThread.java: 184)
  at java.awt.EventDispatchThread.pumpEventsForFilter (EventDispatchThread.java: 178)
  java.awt.Dialog to $1. run (Dialog.java: 1046)
  java.awt.Dialog at $3. Run (Dialog.java: 1098)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Dialog.show (Dialog.java: 1096)
  at java.awt.Component.show (Component.java: 1563)
  at java.awt.Component.setVisible (Component.java: 1515)
  to java.awt.Window.setVisible (Window.java: 842)
  at java.awt.Dialog.setVisible (Dialog.java: 986)
  at com.sunopsis.graphical.dialog.SnpsAbstractDialog.setVisible (SnpsAbstractDialog.java: 299)
  at oracle.odi.ui.OdiConnectController.handleEvent (OdiConnectController.java: 114)
  at oracle.ide.controller.IdeAction.performAction (IdeAction.java: 529)
  at oracle.ide.controller.IdeAction.actionPerformedImpl (IdeAction.java: 884)
  at oracle.ide.controller.IdeAction.actionPerformed (IdeAction.java: 501)
  oracle.odi.ui.docking.AbstractOdiDockableWindow to $1. actionPerformed (AbstractOdiDockableWindow.java: 203)
  at javax.swing.AbstractButton.fireActionPerformed (AbstractButton.java: 1995)
  javax.swing.AbstractButton to $ Handler.actionPerformed (AbstractButton.java: 2318)
  at javax.swing.DefaultButtonModel.fireActionPerformed (DefaultButtonModel.java: 387)
  at javax.swing.DefaultButtonModel.setPressed (DefaultButtonModel.java: 242)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (BasicButtonListener.java: 236)
  at java.awt.AWTEventMulticaster.mouseReleased (AWTEventMulticaster.java: 272)
  at java.awt.Component.processMouseEvent (Component.java: 6267)
  at javax.swing.JComponent.processMouseEvent (JComponent.java: 3267)
  at java.awt.Component.processEvent (Component.java: 6032)
  at java.awt.Container.processEvent (Container.java: 2041)
  at java.awt.Component.dispatchEventImpl (Component.java: 4630)
  at java.awt.Container.dispatchEventImpl (Container.java: 2099)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.LightweightDispatcher.retargetMouseEvent (Container.java: 4577)
  at java.awt.LightweightDispatcher.processMouseEvent (Container.java: 4238)
  at java.awt.LightweightDispatcher.dispatchEvent (Container.java: 4168)
  at java.awt.Container.dispatchEventImpl (Container.java: 2085)
  to java.awt.Window.dispatchEventImpl (Window.java: 2478)
  at java.awt.Component.dispatchEvent (Component.java: 4460)
  at java.awt.EventQueue.dispatchEvent (EventQueue.java: 599)
  at java.awt.EventDispatchThread.pumpOneEventForFilters (EventDispatchThread.java: 269)
  at java.awt.EventDispatchThread.pumpEventsForFilter (EventDispatchThread.java: 184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy (EventDispatchThread.java: 174)
  at java.awt.EventDispatchThread.pumpEvents (EventDispatchThread.java: 169)
  at java.awt.EventDispatchThread.pumpEvents (EventDispatchThread.java: 161)
  at java.awt.EventDispatchThread.run (EventDispatchThread.java: 122)
  Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is java.sql.SQLException: Exception when the connection: oracle.ucp.UniversalConnectionPoolException: could not get the Data Source connection
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection (DataSourceUtils.java: 82)
  at org.springframework.jdbc.core.JdbcTemplate.execute (JdbcTemplate.java: 524)
  at org.springframework.jdbc.core.JdbcTemplate.query (JdbcTemplate.java: 588)
  at org.springframework.jdbc.core.JdbcTemplate.query (JdbcTemplate.java: 613)
  at org.springframework.jdbc.core.JdbcTemplate.query (JdbcTemplate.java: 645)
  at org.springframework.jdbc.object.SqlQuery.execute (SqlQuery.java: 111)
  at org.springframework.jdbc.object.SqlQuery.execute (SqlQuery.java: 121)
  at org.springframework.jdbc.object.SqlQuery.execute (SqlQuery.java: 136)
  oracle.odi.core.repository.support.RepositoryUtils to $ RepositoryInfoSource.loadRepositoryInfo (RepositoryUtils.java: 179)
  at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo (RepositoryUtils.java: 373)
  at oracle.odi.core.repository.Repository.getMasterRepository (Repository.java: 72)
  ... more than 113
  Caused by: java.sql.SQLException: Exception when the connection: oracle.ucp.UniversalConnectionPoolException: could not get the Data Source connection
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection (LoginTimeoutDatasourceAdapter.java: 133)
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection (LoginTimeoutDatasourceAdapter.java: 62)
  at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection (DataSourceUtils.java: 113)
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection (DataSourceUtils.java: 79)
  ... more than 123
  Caused by: java.sql.SQLException: Exception when the connection: oracle.ucp.UniversalConnectionPoolException: could not get the Data Source connection
  at oracle.ucp.util.UCPErrorHandler.newSQLException (UCPErrorHandler.java: 541)
  at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException (PoolDataSourceImpl.java: 587)
  at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection (PoolDataSourceImpl.java: 668)
  at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection (PoolDataSourceImpl.java: 613)
  at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection (PoolDataSourceImpl.java: 607)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java: 39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java: 25)
  at java.lang.reflect.Method.invoke (Method.java: 597)
  oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator to $ DataSourceInvocationHandler.invoke (RuntimeClassLoaderDataSourceCreator.java: 41)
  Proxy0.getConnection $ (unknown Source)
  oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter to $ ConnectionProcessor.run (LoginTimeoutDatasourceAdapter.java: 217)
  java.util.concurrent.Executors to $ RunnableAdapter.call (Executors.java: 441)
  java.util.concurrent.FutureTask to $ Sync.innerRun (FutureTask.java: 303)
  at java.util.concurrent.FutureTask.run (FutureTask.java: 138)
  to java.util.concurrent.ThreadPoolExecutor $ Worker.runTask (ThreadPoolExecutor.java: 886)
  to java.util.concurrent.ThreadPoolExecutor $ Worker.run (ThreadPoolExecutor.java: 908)
  at java.lang.Thread.run (Thread.java: 662)
  Caused by: oracle.ucp.UniversalConnectionPoolException: could not get the Data Source connection
  at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException (UCPErrorHandler.java: 421)
  at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException (UCPErrorHandler.java: 389)
  at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection (DriverConnectionFactoryAdapter.java: 133)
  oracle.ucp.common.UniversalConnectionPoolImpl to $ UniversalConnectionPoolInternal.createOnePooledConnectionInternal (UniversalConnectionPoolImpl.java: 1570)
  Oracle.ucp.common.UniversalConnectionPoolImpl UniversalConnectionPoolInternal.access $ to $600 (UniversalConnectionPoolImpl.java: 1378)
  at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnection (UniversalConnectionPoolImpl.java: 445)
  at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnectionWithoutCountingRequests (UniversalConnectionPoolImpl.java: 302)
  at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnection (UniversalConnectionPoolImpl.java: 129)
  at oracle.ucp.jdbc.JDBCConnectionPool.borrowConnection (JDBCConnectionPool.java: 119)
  at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection (PoolDataSourceImpl.java: 655)
  ... 15 more
  Caused by: java.sql.SQLException: ORA-01017: password / username invalid; log - it refused
  
  at oracle.jdbc.driver.SQLStateMapping.newSQLException (SQLStateMapping.java: 70)
  at oracle.jdbc.driver.DatabaseError.newSQLException (DatabaseError.java: 133)
  at oracle.jdbc.driver.DatabaseError.throwSqlException (DatabaseError.java: 206)
  at oracle.jdbc.driver.T4CTTIoer.processError (T4CTTIoer.java: 455)
  at oracle.jdbc.driver.T4CTTIoer.processError (T4CTTIoer.java: 406)
  at oracle.jdbc.driver.T4CTTIoer.processError (T4CTTIoer.java: 399)
  at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth (T4CTTIoauthenticate.java: 799)
  at oracle.jdbc.driver.T4CConnection.logon (T4CConnection.java: 368)
  to oracle.jdbc.driver.PhysicalConnection. < Init > (PhysicalConnection.java: 508)
  to oracle.jdbc.driver.T4CConnection. < Init > (T4CConnection.java: 203)
  at oracle.jdbc.driver.T4CDriverExtension.getConnection (T4CDriverExtension.java: 33)
  at oracle.jdbc.driver.OracleDriver.connect (OracleDriver.java: 510)
  at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection (DriverConnectionFactoryAdapter.java: 129)
  ... more than 22
  
  ==
  
  >
  I think the problem is in jdbc
  but exhausted my ideas on how to fix
  This
  
  where:
  Already reinstalled ODI 11
  checked in SO way (JAVA_HOME, ODI_JAVA_HOME'm on C:-Program Files-Java-bin------jdk1.6.0_23)
  ORACLE_CLASSES'm on C:-oracle-product------10.2.0------client_1-jdbc-lib------ojdbc14.jar is
  and
  ORACLE_HOME uses C:-oracle-product-10.2.0------client_1
  
  
  My OS is windows vista Professional (the odi11 of client machine)
  the oracle11 database connection
  
  
  have any suggestions for a procedure, something which has not, you have forgotten or did not even know.
  
  Thank you.

  Michael,

  I'm not 100% clear on your location of the error.
  1. do you get this error when you try to install the ODI 11 g?
  2.) or you get this error when you try to establish a connection with the master and the repository of work in the Studio of ODI?
  I think the second is true because you also mention the password and user ODI

  user and password must be that of the schema of the master repository.

  Your driver should be

  oracle.jdbc.driver.OracleDriver

  Try with this URL
  JDBC:Oracle:thin:@SSS.rrr3.ttttj.GGG.br:1521:RRR3