Cannot install my HP 3050 printer in my house netwerk

Similar Questions

• Cannot install my Lexmark 8300 printer all in one

  Cannot install my Lexmark 8300 printer all in one

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US%20&segment=download

  Read the above, after typing in a Lexmark 8300 printer:

  Please start typing your model number to find your product.

  Please try again. There was no product found for this model:

  Printer Lexmark 8300

  Select

  Contact Lexmark

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install the MFP M177fw printer driver

  I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

  I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

  Can I do to install? Thank you.

  Rgds,

  Tony Thk

  Hi @TonyThk,

  Thank you for showing interest in the Forums of HP Support!

  I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

  Tips for a successful wireless connection:

  • What type of encryption are you helping? HP recommends WPA or WPA2.
  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  Disable IPV6 in front panel of the printer menu:

  1. Configuration menu
  2. Network configuration
  3. Network services
  4. IPv6, select disabled.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
  2. Type the IP address in the browser to bring up the SAP.
  3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  4. Select Manual IP.
  5. Enter your IP address manual (192.168.0.232)
  6. Enter 255.255.255.0 for the subnet mask, except if it is different.
  7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  9. Click on apply.
  10. Restart the router, the printer and the computer.
  11. Test print.

  Ensure that your router and firewall do not block these ports.

  • UDP ports: 427, 137, 161
  • TCP port: 9100
  • Card photo upload:
  • UDP ports: 137, 138, 427
  • TCP port: 139
  • Scanning:
  • UDP port: 427
  • TCP ports: 9220, 9500
  • The HP device status:
  • UDP port: 161
  • Sending faxes:
  • UDP port: 427
  • TCP port: 9220
  • Installation of the HP device:
  • UDP port: 427
  • Ports of Web Services:
  • UDP and TCP: 80, 443, 5222 and 5223
  • Hello Ports:
  • TCP and UDP: 5353 and 5297, 5298

  Update the firmware of the printer:

  • Click here to download and install the update of the firmware of the printer.
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to install the USB printer.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

  OT: Print processor.
  During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

  Hi Chancey,

  1. are you able to install other applications?
  2. are you able to print from other applications?

  If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi

• Cannot install laserjet pro p1102w printer, usb error, please help?

  I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

  Hi cowmanchess,

  It seems that you are having problems with your USB port on the computer.

  Have you tried using a different USB port on the computer?

  Have you tried a new USB cable?

  How long is the USB cable you are using?

  You have a USB hub between the printer and the computer?

  Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

  Driver and software of HP LaserJet Full Feature

• Cannot install Epson Photo R300 printer on Wndows XP

  I have an Epson Photo R300 printer which I'm unable to install on my windows XPS. I don't have an installation disc and my system has recently been wiped and restarted. The installation wizard does not include the R300 model. Please notify.  R. beck

  Hi raybeck,.

  You can follow the steps in this link & check if it helps:

  Can not find the driver for Epson R300 printer - for Win 7 Pro 64 bit disk

  Hope the helps of information.

• Cannot install Lexmark X 4270 printer drivers in my computer because the version of windows. Can u correct E-mail website to allow me to install the drives.

  I have laptop Dell Studio 1537. Operating system is Vista. I have Lexmark X 4270 all-in-one printer, but I can't install the drivers of software due to the version of windows. Can u pl advise me what to do. If you can send an email the correct site where I can see readers. Then I can download fdrom Web site.

  Thank you.

  Diakite in Sri Lanka.

  Hello

  Download your drivers from the link below

  Choose the right operating system it

  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X4270&page=product&FromPage=null#2

• Cannot install all-in-one printer of 7280 to my computer with Windows 7-2010 - what can I do?

  When you try to install my Photosmart printer/copier all-in-one on my new computer with Windows 7 Home Premium operating system, a message came that said that I would need to upgrade the operating system Windows 2000, XP and Vista, so I should cancel the installation.  Y at - he no download I can get that would allow me to use my all-in-one with Windows 7?

  Hi beeg1,

  You are using an older driver disk?

  If so, download the latest version of your printer drivers from the HP support below site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76036-1&cc=us&DLC=en&LC=en&OS=4063&product=3204785&sw_lang=

  Let me know if it helps.

• Cannot install Epson XP-215 printing software

  When I try to install my XP Epson-215 software on my laptop I get the message "error occurred [0-1].

  Hi Elizabeth,.

  What is the full error you receive when you try to install the printer?

  I wish that you run the Microsoft fixit and then try to install the printer.

  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/

  Hope this helps and keep us informed if you need help.

• Cannot install my hp l7590 printer my printer connected to the network via another computer

  I have win 7 computer and the printer attached to the xp computer

  When I click on add a printer, I can see the printer but when I try to install it

  Windows says it can't find the driver in the network after watching it in windows update

  I tried to find it manually in the directory of the software for the printer hp, but I don't know which

  Using INF file

  If anyone can help me

  I will appriceciate it.

  in amir thanks

  Hi amir40,

  You have a more intermittent connection if you connect the printer to your router and then install the printer on computers using the network. Here is a document on how to connect the printer to your router.

  http://support.HP.com/us-en/document/c02279915

  If you want to continue with the print share. See the following document below.

  http://search.Microsoft.com/en-us/results.aspx?q=printer+sharing+USB

• Cannot install the Epson CX4800 printer driver in the new Win7 64-bit system.

  I have a new pc with Win7 64 bit. I downloaded the driver Vista/Win7 64-bit on the Epson site. The Installer-error at the point when you try to install the driver. I checked Device Manager and can see Printing USB support in the USB controllers section. When you view Device Manager, I can unplug the printer USB cable and USB printing support icon goes. When I plug the cable into the printer, the reapperars icon. I can scan documents from the printer to the computer. I can also copy the parts of the printer on the paper. I can't get the driver to install. Windows simply says "driver not installed device software." I run the driver installation program Epson 4 times with no success. Your help is appreciated.

  Hi halbad,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f1d234f2-d14c-4b0a-A2ac-53fb72fb5357

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install drivers for AIO Printer 924

  I recently bought a new PC running on Windows 8 (took me a while to get used to!) and wanted to connect my Dell AIO 924 printer/Scanner to the new PC.  I followed the advice given - the PC configuration change settings - devices - add a device.  I put the CD of driver & utilities belonging to the printer in the DVD/CD drive.  When I check on devices, I think the 924 AIO listed but it says driver is not available.  I also tried to install using the Control Panel - Add a device, but after research it just says not: no devices found. It detects I have a scanner connected to the computer but not a printer.

  jean9,

  Try this procedure and see if it works...

  To the best of my knowledge, window 8 is not supported for this printer. You can try this, it may or may not work...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications. If no antivirus program is installed, Windows Defender is the default virus program. Try to read it, printer let past Microsoft Essentials/Windows Defender

  Rick

• Scanner - cannot install wireless HP 8500 printer all in one as a scanner

  The print on my home wireless network, but the system does not see it as a scanner and I can't find a way to do it.

  Help.
  Please, I beg you.

  You have installed the drivers from here?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459#n205

• Cannot install the Kodak wireless printer.

  Original title: http://windows.microsoft.com/en-us/windows8/install-a-printer

  Trying to install a Kodak printer to a computer from hp via a wireless connection and can't find the printer.

  Is this recent post offers you clues?

  Epson printer WF-2510 with wireless-"printer not connected."

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Epson-printer-WF-2510-with-wireless-connection/5ed27221-0cc3-4725-bdd0-2a56ecd9ba65