Cannot install VIPRE software; Impossible to uninstall Norton 360 (Error 21)

Similar Questions

• Cannot install Skype because impossible to uninstall

  It says it cannot locate the older version of Skype that must be uninstalled before that Skype is downloaded, the thing is I don't have Skype on my computer, I uninstalled it recently and there is no Skype folder on my computer. How can I fix it?

  You can run the following program to eliminate the traces of Skype to allow you to reinstall the latest version.

  http://www.pcdust.com/downloads/SRT/SRT.exe

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.

• Satellite A305-S6825: How do I uninstall Norton 360

  Just bought the A305-S6825 and wonder how I might be able to uninstall Norton 360 (in its entirety) that was installed when I bought the camera.

  Can anyone help?

  Hello

  You can uninstall the applications installed in the Panel.
  Open programs and features by clicking on the button start.
  Then click on Control Panel, click programs, and then click programs and features.
  Select a program and then click on uninstall.

  In addition, you can use a free app called CCLeaner to clean the registry and titles of Norton.

  See you soon

• Windows XP does not recognize my DVD players after uninstalling Norton 360

  After uninstalling Norton 360, my Windows XP-based computer does not recognize my CD-ROM/DVD-ROM drives.  Tried to reinstall drivers without success.  Clicking on driver, I get a drive not installed message.  Using the Manager, have uninstalled and reinstalled the drives without success.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Impossible to uninstall a program error: unable to generate the uninstaller for ca aintivirus E9030 command line.

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Try this... no guarantee

  Start > computer > open C: drive > open the Progran files > y at - it a record of the Ca antivirus?
  If so, open it > is there a uninstaller.exe file here?
  If so, open it and let go about uninstalling.

  Or,

  Start > all programs > CA antivirus > y at - it an option to uninstall?

  Hope one of these AIDS.

• Impossible to uninstall Norton

  I did a reset of my laptop, lost I've installed all the programs.  While trying to install my Microsoft Antivirus trend, it has not transferred due to a failure to uninstall Norton antivirus. I tried to uninstall previously, I thougth I did, but when the trend Micro Titanium fail to install, it displays a window telling me, asked me if I wanted to uninstall Norton, I've tried several times, but it didn't. It seems to me, as Norton has a function to avoid or to cheat customers to prevent them from unistalling the program. It was a pain and a waste of time. It really upsetme, to the point that I would never know Norton. Please, the HP software that is installed with this anoing free trial Norton in the system, should not be there, or at least it should be optional.  Out of 3 notebooks we bougth of HSN, all have the same address. Now, we want to use the Trend Micro Titanium Antivirus, which is the software solution that adds a life of Pc technical support subscription. Now, I was not protected because of this undesirable Norton.  Although I call for support for them, they sent a link to get rid of Norton, but it did not work. I am very angry to lose time to do all this work, calls, this report by filling... I'm busy and can care for Norton, but to hate him. Please take note of this issue and do not expose customers time to lose with the unwanted stuff... as if I have time to waste.

  Hello

  Try to download and run the Norton Removal Tool on the following link.

  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  When this has completed, restart the laptop.

  Kind regards

  DP - K

• Cannot install HP Software Solutions for C5550 on Vista

  I recently bought a new Photosmart C5550 all-in-one printer. I spent two full days, try to install the software on my Vista desktop. After countless hours on the phone with technical support to get the same results (fatal error & Windows Installer problems), I was told to contact the computer manufacturer. Another two hours on the phone with tech support and was told to reinstall Windows. I've done reluctantly. I received all of the updates in my installed security software and then tried the printer... same results as before reintsalling Windows. I tried to reformat once more, updates installed and then installed the printer drivers & software before installing security software. It actually installed and worked very well.  Last week, I discovered that there is an updated driver and software of the printer so I decided to install it, don't think not that I would have the same problems. Is it installed perfectly on my laptop (which she had done before), but would not install it on my desktop. After another few hours in line with the technical support I uninstalled all the software and printer drivers & stop all unnecessary processes (including security software), but still no luck. I am now without a printer on my desk and can't figure out what to do. I don't want to have to reformat again and try to install. I wonder if I uninstall my security software if it works because the printer seems to install without security software installed. Any help will be appreciated. Thank you!

  Just to update, I registered & re-recorded MSI before installing since that was the error message that I kept getting.

• Impossible to install security software 1603,0, 0 x 000 errors

  For the last 3 weeks I tried to install Trend Micro Internet Security software. Initially the 1603 error is out of my attempt to upgrade my version 3.51 to the latest version 5. Software Trend Micro uninstalled my old version then threw a 1603 error when you try to install the latest version. I tried this site and had a broad Trend Micro remote support. The last attempt to remedy the situation failed after 2 1/2 hours of support away from the Hungary and about 5 trying to clean my registry windows and re install my deep security software. Their developers (Tren Micro) came to the conclusion that the fault lies with the installer of windows on my pc. Even if I ran sfc/scannow and no error was detected, I can't get any software security at all to install not only Trend Micro.

  As I mentioned briefly earlier that I did everything what to do in what concerns the cleanup of registry entries and temporary directories that is the first step to try to resolve these problems

  I need options. Windows reports under its security suite that Trend Micro is installed, but not in a format it recognizes. This is misleading and does not allow me to make one installs clean

  Any ideas?

  This is just to inform everyone that this problem has been resolved. Extended support Trend Micro resolved after suspending system restore facilities which I think affected the file access permissions. My security software is now installed, updated and working properly

• Update to Windows 7 RTM failing - error 80070652 - cannot install new software or run Windows Update successfully.

  I upgraded from Win 7 RC for Win 7 RTM on my 64-bit machine from Dell and started installing all my software.  Everything was fine until I started Windows Update and had a list of 15 updates that needed to be done.  Several have had agreements that I had to accept, he wasn't the normal process of "update in the background.  I had to leave and is concerned to let the process of continuous updating on its own and potentially hang, so I cancelled it.

  Since then, I can't install any software or to upgrade my system.  Updates fail with the error message "WindowsUpdate_80070652" which seems to be undefined.  In some cases, I get an error message another installation is running and the current installation or update cannot be performed until the end of the current installation.

  I restarted my dozens of machine time and then immediately began installing or upgrading windows - without success.

  Any suggestions would be greatly appreciated.  It seems that there is a dead plant that does not block updates and installs.

  Jeff

  It is not an error "undefined":

  WindowsUpdate_80070652 = ErrorClientUpdateInProgress ERROR_INSTALL_ALREADY_RUNNING
  The program to be upgraded is may be missing or the patch may update a different version of the program

  You could always...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Cannot install all software: error: an application not valid win 32

  I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

  Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

  Hello

  This problem may be caused by one of the options below.

  1. the file is corrupt, missing, or bad.

  2 file is not designed for your version of Windows.

  3. the file is a virus, worm or other malicious program file.

  4. incompatibility of hardware.

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

• Cannot install application software

  I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

  Aamir Attari

  I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

  Hello Amir

  You always struggle to install the software on your computer in Windows 7 RC?  We had several post on Adobe CS3 software installation problems.  You must ensure that you have no other product from Adobe installed before you try to install CS3.  If you have Flash, Shockwave, Acrobat is installed, they must be uninstalled.  Once you have removed Adobe programs, you should be able to install CS3.  What antivirus program you are trying to use?  It is one of the programs that have been tested and work with Windows 7?  Here is a link to a page of software compatibility to Microsoft Windows 7 RC:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/

  Let us know if these suggestions have you helped to resolve your problems.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

  I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

  You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

  Go to options-support card on your BB
  The settings should be:

  Media card support: on
  Encryption mode: no
  Mass storage Mode support: on
  Auto enable mass storage Mode when connected: Yes

  Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.