Cannot install vtech learning lodge navigator in Windows 7

Similar Questions

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• Cannot install hp 1300 series on the Windows 7 operating system

  I just got a new laptop with Windows 7.  The installation disc contains the operating system is not compatible and that's why it cannot install it.

  I tried to change the compatibility by changing the request of Vista installation file. Still will not work.

  I tried to install directly from the laptop but my printer is not - he is online and says he cannot access at this time. Try again. (I tried again and again)

  I searched for HP PSC 1300 series all-in-one on the HP website and it is not found.

  Help, please.  I don't want to buy another printer when this one works very well (well, he did on my old computer)

  Thank you

  Use the link below to download the software for Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=us&OS=4062&product=374568&sw_lang=

  Download and save the driver on desktop screen. Make sure that the USB cable is not connected to the port on the computer before you start the installation of s/w. If the same error on the subject not compatible operating system, press on and hold down the CTRL + SHIFT keys on the keyboard and click CANCEL on the error message.

  It ignores the error and we will install the s/w.

• Cannot install updates or Flash Player on Windows Vista

  I know this is an old machine, but I really need help.

  I recently had to restore laptop cleaning to factory settings and have had problems with windows update since.

  Running Vista Home 32-bit.

  Installing sp2, but now he finds other 120ish updated but will not progress the 0% download status

  Also cannot install latest Flash Player. Going to download but not install.

  Some research suggests that this was a certificate problem and run up-to-date KB2763674

  Have downloaded it but when I try to run it I am stuck as I threw in a "search for update" constantly.

  Pointers appreciated.

  Hello

  You can read the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  How to back up and restore the registry in Windows:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-Vista

  Important: all by performing the check disk on the hard disk, if bad sectors are detected and if it tries to repair this area, all available data on the risk of being lost.

  Please let us know if the problem persists. We will be happy to help you further.

• My Innotab learning Lodge Navigator keeps telling me to download flashplayer and I did several times and yet he keeps asking me to do. Please help someone

  The learning lodge Innotab keeps telling me to download flashplayer... I have and he always tells me to do. What I am doing wrong?

  I had mining work by using the installer of the lodge of learning, and when the flash install installation guide asks you to choose which version of the internet cover I select 'other' and it worked!

• Cannot install the trial version of the Windows Version of Photoshop Elements 11

  Download and he was trying to install the trial version of Windows Photoshop elements 11 after I run Setup I get this message - cannot install this application because this installer has been misconfigured. Please contact the application author.

  http://forums.Adobe.com/thread/1092011

• Cannot install hp psc 750 on my Windows XP laptop

  I got a NEW, never been used, all in one hp psc 750 printer, but it will not install on my laptop HP Pavillion Windows XP.  I get the message: "Installation not supported for Windows 5.1 - 5.2 - 5.3.»  Is it possible to install this printer?  Support documents indicate it was made to work with Windows 98, 2000, or me.

  Have you tried this driver?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=OJ-4013-2&CC=US&DLC=en&LC=en&os=228&Product=57769&sw_lang=

• Cannot install the update of security for Windows XP (KB982665)

  Original title: security update/install failures

  Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

  Hi ubancosr,

  Try to download and install the update manually and check.

  Update security for Windows XP (KB982665)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaseJet M1530 MFP: Cannot install printer multifunction LaserJet M1530 on Windows 10 drivers

  I tried to install the downloaded driver software from http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3... for my multifunction printer drivers LaserJet M1530 on my new windows 10 Pro o/s, but it has always failed with the message below. Restarted my laptop and I tried installing several times, are the same mistakes. Also, I installed the old drivers from the CD supplied with the printer, the same error as shown.

  The drivers is not compatible to Windows 10? Any suggestion to solve this problems?

  

  Hello @chrislim2888,

  It is a great place to get help! I read your post and see that you are unable to install the printer on the computer Windows 10. Thank you for providing all the information and the screenshot. I want to help you solve this problem.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
   
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Immediately after connecting the USB cable, follow the steps described in this paper: A Fatal Error displays during Installation of the software. This should resolve this error message.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  How is the printer connected?

  Please click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Cannot install the update of security for Windows XP (KB2686509)

  original title: why my XP pro does not accept the following security update? Update security for Windows XP (KB2686509)

  Hello

  I'm not really very good which is why I chose to use automatic updates. I recently got 'updates are ready for your computer' and when I start to download it stops pretty quickly and said:

  The following updates have not been installed.

  Update security for Windows XP (KB2686509)

  Is there a wat to fix this problem without needing to know the registrys etc.

  Thank you

  Mick

  See my post on the third page of this topic which contains detailed instructions for anyone with this problem. Go to the bottom of this page and click Next until you get to page three.

  

  Thanks for the update Mick. You should be able to double-click the file to open it in the command prompt. I did not write the script, so I can't tell you why you were unable to launch it by double clicking. Right click and choose to run it in command line will still work.

  @ Icom756pro I do not work for Microsoft, then you would be best suited to forward your complaint directly to them. I understand your frustration, however. I can only recommend that you try the script that I've linked to page 1 of this topic. If this does not resolve the problem then simply hide the update. You should not be prompted to install later.

• Cannot install "iTunes" on my compuper running Windows 8

  I'm new here and don't know how to do a wire and this problem I had all the time when I try to install "' iTunes" there is a problem with this Windows Installer package. " A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

  Probably a corrupted download. I downloaded a copy of iTunes 11 64-bit and I installed it on 3 computers running Windows Vista 64 bit, Windows 7 64-bit, 64-bit Windows 8.

  Try to download again and see if it solves the problem.

• Satellite A200-1 s 5 - cannot install driver LAN after installation of Windows 7

  I have a laptop Toshiba A200-1 s 5, serial number: X7357433K. I just installed Windows 7 and downloaded and installed all the drivers of Toshiba laptop. I have no problem device in the system information screen.

  In Device Manager, the cards I have that the "Intel (r) PRO/Wireless' network. When I install the downloaded driver for LAN (lan-20091103092515) it says "Realtek LAN Driver V7.003.0522.2009", but I can't not under network adapters - I don't know where he's going? I can't find everything Realtek device in Device Manager. Needles to say works Wireless LAN, LAN does not work.

  Connectivity doctor shows Wireless Lan, Dial-up Modem and Bluetooth, but no LAN. Trying to load the driver from Realtek - does not help. -message: the device does not work properly because Windows cannot load the drivers required for this device (Code 31)
  I even tried to install from Realtek and update the driver for lan-20091103092515 - same error Code 31.

  Hey Buddy,

  You have an unknown device in Device Manager? This could be the missing LAN card

  Also check if there are devices hidden in Device Manager. So open the Device Manager and go to view > show hidden devices.

  Normally, you should now see the LAN card and then you can update the driver.

  Check this box!

• Cannot install wc3 on elitebook hp with windows 7

  Hey, I recently got an elitebook hp with windows 7 and I went to install warcraft 3 on it. When I put the reign of chaos it installed fine and correctly but when I put in disc expansion throne frozen it says I have to install warcraft 3 to go forward and I uninstalled it and tried to put it in different drives on my computer but nothing seems to work, would appreciate any help in this

  Hi KiD_CuD1,
   
  1. What is the exact message?
  2. using 64-bit or the 32-bit version of the operating system?
   
  Installing the game cannot continue due to some reasons such as:
   
  1 game corrupt in the DVD.
  2. the stripes or impure DVD.
  3 previous World Of Warcraft installation files on the computer that could not be rewritten.
  4. any security or any other application program blocks installation.
  
  Step 1: Clean the disc
   
  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.
                   
  Step 2: If the steps above don't fix the issue, I recommend you contact the support of World of Warcraft for the replaced disk.

  
  http://www.Blizzard.com/us/?rhtml=y

   

  http://us.Blizzard.com/en-us/community/  

                                  

   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• Cannot install error matix web: problem with windows install.

  Original title: install windows package

  Hi, I was wondering if someone could help me, not used webmatrix for awhile and I put on and its not responding do not, I tried to re download and no luck, from the web, platform installer it returns constantly so I had a problem with the windows package install. Please can someone help?

  I use microsoft web platform install 3.0

  It fails when I try to install and a message appears

  ASP.NET web pages

  This product has not been installed successfully. There is a problem with this windows package install. a program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  ASP.NET web pages language packs

  This product can not be installed because a failure that it was not installed successfully.

  Microsoft webmatrix.

  This product cannot be installed because a prduct which it depends have not installed successfully

  Hello

  1. What is the message exact error do you get when you try to install the web matrix?

  2. where did you download webmatrix?

  I suggest you to try the steps below and check if it helps.

  Verify that the Windows Installer service is running or not.

  Start the Windows Installer service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of items, double-click Windows installation service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.

  e. restart the computer.

  Check whether the problem is resolved.

  Hope this information is useful.