Cannot install Windows CODE 80073712 updates & 6 b 2.

Similar Questions

• Cannot install Windows 3.1 updated through Windows Update, error code 0x80070005

  Running Windows XP Pro on a MacBook Pro running OS 10.7.3 and Parallels 7

  Attempted to execute systematic of Windows Update, who told me that I needed to upgrade "of the components' Windows Update

  When I click on the "Download and install now" button the Windows Installer 3.1 download fails, with error code 0x80070005

  Any suggestions?

  Hello

  -Have you logged as administrator?

  Your problem may be related to authentication.

  I suggest you to follow the steps in this article and check if it helps.
  You cannot install some programs or updates

• Cannot install Windows in bulk updates

  After a major update (back to top), my computer will only install updates MS 131and I know there are more than 100 more, they have obviously downloaded but have NOT installed. For updates they show has failed, and in the updates installed, they are nowhere to be found. Does this mean "that they have been downloaded, but NOT installed?"  Because I continue to check the updates because I know they are NOT installed and it telling me there is no. To download more than 100 updates one is ridiculous, if it can still be done. After the update it downloaded 1.5 GB of MS updates and the other half has failed. I don't have a choice on my date of restoration, a mouse driver crashed, so the update was important. And the next day he downloaded more than 100. "Should I download these one? If Yes, I switch to Apple.

  Original title: amount of updates

  Hello

  I've seen a number of messages about this problem, so I spent the evening reload an image of two year, perform a new installation of Win 8 who had never had Windows updates...

  For the most part just out of curiosity I guess... and the fact that you mentioned 200 + updates that seemed much too much for me.

  There were 109 updates for my machine. After installation of these groups, I checked once again more updates to Windows, and there is more than 18... A couple less than your total actually. And after checking again once there is no more...

  Your total of 131 is probably correct... I think that you have a gap in your numbers it's because a lot of the first failed and redownloaded again.

  If I go on my updates installed page, it lists 137, even if I downloaded only 127...

  This is because some updates are 'Cumulative' who have more than an update of the package.

  I don't know if I mentioned this in another thread or not, but don't try to do all the updates at the same time... It SHOULD work, but according to the actual updates, they can actually interfere with each other.

  Especially if the .net Framework updates are included. .NET 3.5 in particular. This issue has been much come on the forum, and I'm little tired of repeatedly typing, so I wrote a few notes...

  This is just my opinion, for what it's worth, it's here...

  I just did a test installation 109 updates Windows in groups. All groups have continued the installation process even if they were supposed to be finished, and showed the RESTART...

  You must run the Task Manager to see this.

  I did thirteen .net Framework 3.5.1 updates totaled 206 MB. At least 20 minutes after the RESTART appeared several process continued to run.

  Because I have an application that displays all internet activity, I have seen that Windows Installer would go several times, and when it ran, it would trigger a download of a certain type.

  Two other processes that are running are Windows Module Installer and Windows Module Installer Worker.

  In Win 7, they are called "mscorsvrs" and after you have installed a .net Framework update there are sometimes up to three who take turns running. The best I can describe their function, they're afflicted a compiler.

  Even if the installation is supposed to be completed according to Windows Update, it is not. Not until the end of the process...

  This is the source of many problems with the updates of Windows not... Over the years, I saw countless times in which an update failed after that these processes started to run... To the beautiful environment of the rest updates.

  It's the sequence, I used to install updates 109 @ 1.22 GB on a computer where Windows Update had never been performed...

  Group #1... @ 128 MB's malicious software removal tool and Windows Defender... Then restart

  Group #2... Graphics, internet explore ActiveX

  (Updates of seven first in the list before the .net start) 7 @ 188 MB...  Then restart

  Group #3... .NET framework 3.5.1...  13 @ 105 MB...  It took about 20 minutes for the CPU go to zero before rebooting, as mentioned above...

  Group #4...  .NET framework 4.5...   11 @ 162 MB...   It took about 45 seconds for the CPU to zero before the reboot even if reboot was not required.

  Group #5...  Updates to security...   45 @ 105 MB...     Once again, reboot only after zero CPU

  Group #6...  Important updates...  30 @ 419 MB...     Once again, reboot only after zero CPU

  After installing the first 109, I checked for new updates, and 18 were found @ 579 mb. None were .net Framework... All were successful.

  I actually did this process twice to check it again and with no failure... He managed both times.

  BTW... I have 1.01 GB of updates of Windows to be 'cleaned '... This does mean that they have failed. What is cleaned is the old files that have been replaced and the left on the packages that are no longer needed.

  Kinda like your TEMP folder where a large number of programs store the installation files... After a week, disk cleanup will allow you to remove...

• Cannot install the code for update for Windows XP (KB2686509) security error 0x8007F0F4

  I tried the steps and fix its on other items.  Nothing seems to work even though it says it has found things to correct and do.  What should I try now?

  Vaughnh,

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/958051 >

  UTC/GMT is 16:34 Tuesday, July 31, 2012

• HP ENVY RE TS 23-k300xt AIO: cannot install Windows 8.1 updates

  I have AIO 23-k300xt HP ENVY RE TS with Windows 8.1.  Windows updates do not install.  It tries to install but has then save changes, I tried all the remedies proposed without success. He installed 2% of updates in August and no oil in September.

  I am entitled to a free copy of windows 10. I tried to install. It is said current download, but nothing ever happens.

  Like a fool I keep doing the same thing over and over expecying a different result.

  Thnks.

  Peter

  Finally! It took a few days but finally ithappened. 8.1 Windows updates to my surprise were not to be regularized.

  Then Windows 10 itself installed and works very well.  Incidentally Windows 10 is a pleasant experience - but a lot to learn

• Cannot install Windows 8.1 update on my HP Envy TS M6 Sleekbook

  I have all of the current drivers and software.  It came with Windows 8, and I try to install 8.1.  He does it well until you restart.  I do the reboot and it gets halfway through and the screen will Dim and hours later, the screen is still dark.  "I press the power button and it says something like: trying to find install ' and from there nothing happens.  Finally, I end up having to go back to windows 8.   Your help is appreciated.  From what I've read, 8.1 is maybe a problem

  I haven't posted in this forum, because I've had my laptop ENVY workshop of repair of HP in January. HP has not load 8.1 then even if I asked what she and the Cat Lady said they would. I decided to stay with 8.0 until HP told me that it was OK to download 8.1. They never have. A couple of weeks, I was downloading updates of the application and one of them has required 8.1 so they have downloaded 8.1 without my concent. At the time I realized what was going on it was halfway through with the installation. It was completed without a hitch, so they must have fixed the problem. I have not downloaded and installed updates 8.1 still pending. I also noticed that the PC is faster when you access web sites with Windows Explorer, so it's worth. Except that I don't notice much of a difference.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• Cannot install Windows updates and cannot install new programs due to Error Codes: CODE C355, Code 80070652

  Original title: C355 Codes error: CODE, Code 80070652

  I'm unable to download the updates of widows and also have problems to install new programs.  The error is in the topic above and also get a screenshot that windows installs another program that must be done first when don't want to install anything.

  Hi Whitefish50m,

  (1) what programs are you trying to install?

  (2) how long have you been faced with this problem?

  Please provide the number of up-to-date Knowledge Base that you are trying to install.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can follow the steps described in the article below

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  Method 3: You can also view the steps mentioned in the link below

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Error Code 80604004 cannot install Windows security update KB 2296199

  Already tried "Microsoft Fix It" but no problems have been detected

  Hello

  1. what Microsoft 'Fix it' has been run on your machine?

  Follow the steps below and check, if it helps.

  Step 1:
  
  Disable all security software and try to install the updates.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Follow the steps in the article below and check if it can help solve the problem.

  You cannot install some programs or updates

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the pkg of update for the windows client, I get error code0x8004ff84

  I get error code ox8004ff84

  Hello

  Method 1:
  You can read the following article.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461
  Method 2:
  You can read the following article.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. See the following link for more information.
  http://support.Microsoft.com/kb/322756
  See also:
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
  It will be useful.

• Error 0 x 80240036, cannot install Windows updates

  Original title: 0 x 80240036

  I keep crashing is microsofts telling us from upgrade.or it's banks

  Hello

  1. Once you get the error message?

  2. do you have security software installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  If you receive the error code when trying to install the Windows updates, you can follow the steps below and check.

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Try to install the updates and if the issue is not resolved, go to method 2:

  Method 2:

  If the problem is not solve I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  
  Hope this helps and keep us informed if you need help.