HP Envy 14 (beats): more great disc into optical drive replacement

Similar Questions

• error message please insert a blank disc into CD Drive (E :). when burning using WMP 11 in XP

  Original title: error message

  Please help someone

  OK, I tried everthing, I use windows xp

  Last week I updated my windows media player and now I have WMP 11 (sucks). Before I did the new update I could burn c.ds very well. But now I get an error message saying: Please insert a blank disc into CD Drive (E :). Once WMP detects a new disc, it will start automatically hot. I tried so many new CD I stop purchase. So I wait a minute until I see it have detected a blank cd (on the left it shows blank disc then try again, but I can't burn data or audio discs.) I try a few things about fixing the problem as uninstall WMP 11 but it is still on my computer - could someone help me.

  Thanks for the reply

  But who doesn't have everything he has told me that I didn't have a cd/dvd was not able when just before I installed the update WMP 11 he burned cds very well helped. Is there a way I can reinstall my old version?

  ===============================
  The following freeware can be worth a try:

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  Download CDBurnerXP
  http://CDBurnerXP.se/download.php

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.

• error message: there is no disc in the drive, please insert a disc into the drive.

  This happened today after that I used my USB and now I cantget get rid of this error code I click Cancel and it just keeps popping up! its so annoying, please help I would really appreciate it! thaks

  Hello laladjmom23,

  1. do you insert any removable drive to your computer before having this problem?

  I suggest that you follow the section below to resolve this issue:

  http://support.Microsoft.com/kb/330137

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to restore media create disc HP Envy m6-k025dx, which have no optical drive?

  Hello

  I use Hp Envy m6-K025dx, which comes with no optical drive. How can I make a recovery disk media?

  Hello

  Yes, you can use an external CD/DVD drive, connect it via USB, and then create a set of recovery disks.  For example, the typre of device you need is on the following link.

  http://www.Amazon.co.UK/Samsung-se-S084C-TSWS-external-optical/DP/B002Q2MJ5O/ref=tag_stp_s2_edpp_url

  Kind regards

  DP - K

• Advance Mode XP Backup, twice after backup is complete, cannot create an ASR file because I did not insert a floppy disk. I insert a disc in my drive, please help me how do.

  Running a WindowsXP Professional, I tried twice to my systems backup using the Backup Wizard. Twice tried to use advanced mode to save. I have 3 choices, first Assistant backup, Second, Assistant food and finally Assistant recovery. I clicked on the wizard of recovery of automatic systems, the wizard to create a backup of the two parts of my systems, a diskette that has my systems settings and other media that contains a backup of my score of local systems.

  Twice I tried to insert a disc into my drive and started to click on column e ASR. so to start the long process of backing up my files, after almost two hours later my backup files already completed, a screen appears saying: this isn't in my Wizard floppy drive cannot create ASR inside. He needs a disc with an ASR info, more data backup systems to restore my computer if it meets a major systems failure. My problem is, how to set the disk to my systems before starting settings to back up my files and data with the systems Advance Recovery Wizard first. Thank you.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ntbackup_adv_backup_options.mspx?mfr=true

  It will be useful.

• Insert a disc in the drive \Device\Harddisk3\DR3?

  have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

  When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

  very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

  was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

  code attached

  new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

• Optical drive Blu - ray - XPS 8900 - where can I find out more

  Recently received a XPS 8900 special edition desktop computer. Very happy so far, but there seems to be very limited user information available (the manual is pretty bare bones).

  Am I missing something (calculated limited skills) but I would particularly like to see more details on the optical drive. I tried a DVD blu - ray in there, but he would not play. My understanding is that this reader reads the blu - ray, but will not write to it. It is perhaps the opposite autour?

  Thanks for any help.

  The optical drive is a Blu - ray Combo that reads BD (Blu - ray) and player written on DVD/CD.

  Windows 10 isn't any software built to play the DVD (Blu - ray or digital). So, you will need to find an app that plays DVDs to win 10. There are free and paid apps so do your homework. You can watch this youtube to get advice on a free Blu - ray player.

  I have no experience with Blu - ray apps, so cannot recommend any one, but only to install an application from a reliable source, and don't forget to watch the download does not seek to install a lot of scrap or ad-ware and that you do not want.

• "Please insert a disc into drive I" error message problem. Help, please!

  I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

  When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

  I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

  Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

  I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

  I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

  I thank the members of the forum for their help in advance.

  I really appreciate all help members can give me.

  1, the diagnostic software that youre looking for WDC, is a MS-DOS

  utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

  on disk, it automatically runs... With respect to the current problem, try to go to run, type:

  diskmgmt.msc

  MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

  close the msc...

  You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

  The type of disk list: list volume type: HELP for cmds all the...

• Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

  Hello

  This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

  You can try to change the photo screensaver can access the registry path if it exists.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

  c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

  (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

  e. If isn't changing for the above entry.

  f. exit the registry editor, restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

  All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

  Original title: disc E

  Hello

  Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

  It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

  (1) Windows operating system you are using on the computer?

  (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

  (3) what is the exact full error message you get?

  (4) when exactly you get this error message? It's when you try to start the computer?

  (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

  (6) what are the recent changes that you made to your computer before this problem?

  Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

  Suggestions for a question on the help forums

  Hope it will be useful.

• How can I make YouTube playback buttons and other plug-ins more great because they are so tiny?

  How can I make YouTube playback buttons and other plug-ins more great because they are so tiny in Firefox? I tried some suggestions dealing with entering "subject: config ' in a fresh browser, but does not. I also downloaded the add-on called "Theme font & size changer", but that no longer works. So I'm reaching here that it was a suggestion that offered another user here.

  Ah, Yes, that's - a ultra high resolution (dots per inch) display. It is a known problem in Flash Player, which Adobe is working on fixing.

  In the meantime, you can get some videos to have normal size controls from the Youtube HTML5 video player:
  In Firefox, go to https://www.youtube.com/html5 and click on the button "request the HTML5 player.

• Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

  Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

  Hello

  1. what version of operating system you are using?
  2. did you of recent changes on your system prior to this problem?
  3. when, exactly, you get this error message?

  You can try the steps mentioned below and check if it helps to solve the problem.

  Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• How to merge two discs into one?

  I recently updated my OS to Windows XP Edition Home Premium to Windows XP Pro. One way or another I have now two drives (Local 'C' and 'E' Local drive).  When I start the computer it opens to E drive and I continually have a message that I don't have enough disk space on drive E.  How can I megre present two discs into one?  I tried to copy the contents of the C drive in drive E, but I get the message that I don't have enough space on this drive.

  Recommendations or suggestions will be appreciated.  Thank you.

  Ernie...

  Hi Ernie,.

  I suggest you to follow these steps and check if the problem persists.

  a. go to the start menu and open 'control panel '.
  b. Select the option "System and Maintenance" If you use the Control Panel view home and 'Administrative tools' If you use the "classic" view
  d. in the "Administrative Tools" section, select "format and create partitions on the disk.
  e. for users "Classic view", select "Computer management" and select "Storage". Once finished, click on "disk management".
  f. when the list of your reader, choose the one with which you want to merge your disk partitioned with (for example drive E :) and select 'Delete Volume'.)
  g. therefore, select your C: drive and the option "Extend Volume". Your computer will automatically select the empty spaces available on your hard drive and you can change them if you want to do.

  Note: Make sure that you back up the data and then remove drive E.

• floppy drive please insert a disc into drive error message A

  I TRIED 2 NEW FLOPPY DRIVES, AND EACH OF THEM GIVES AN ERROR MESSAGE THAT SAYS: S ' PLEASE INSERT A DISC IN THE DRIVE A.I DID A LOT OF CONTROLS AND I TRIED A LOT OF THINGS TO DO FLOPPY WORK.IT SAYS IN DEVICE MANAGER THAT THIS DEVICE IS WORKING PROPERLY. CABLES ARE NOT GOOD, OR IS IT A PROBLEM WITH XP? ARE MY BACKWORD CABLES, OR THE TWO DISCS ARE DEFECTIVE? IT WILL NOT READ OR WRITE. WHAT CAN I DO ELSE? IT SHOWS ON MY COMPUTER WHERE IT EXISTS AS A PLAYER A. I CAN FORGET ABOUT FLOPPY DRIVES IF I CAN'T GET AN ANSWER TO THIS PROBLEM. I ALSO READ THAT IT IS NORMAL FOR THE FLOPPY DRIVE, DO NOT SHOW ON THE SCREEN OF DISK MANAGEMENT. ANY HELP WOULD BE APRECIATED. - THANKS.

  Hello

  Exactly what you do when you get the message "Please insert a disk in drive A;

  Your cables might be backward. Some cables I've seen can be connected backwards, but normally there is a lack of female pin and/or a physical bar that stops you place the cable correctly. In case of doubt, all cables (that I saw) have an edge that is color which is the limit where pin 1 is. Your motherboard and the floppy drive (s) should also indicate what is pin 1 (sometimes with the number 1) or sometimes by an arrowhead. In addition, the end of the cable with the twist must be connected on the floppy drive.

  As you have obviously been disconnecting and reconnecting the cable, you should check for twisted on the Board and the drive pins.

  The device does not show in disk management, but should appear in the Device Manager.

  Don't you hear the drive trying to search the diskette?

  Are your formatted diskettes?

  Have you tried a new pre-formatted floppy?

  I do not recommend people to use diskettes these days. The reasons include

  • reliability
  • capacity
  • convenience

  Also, although I did not buy the disks for centuries, I wouldn't be surprised to see that memory sticks are cheaper than a box of diskettes and hold much more data.

  I would say get a memory stick and use it instead of floppy disks.

  Tricky