Cannot load speed model

Similar Questions

• Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Original title: Audio recording sound recording microphone

  Hey, if I get this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

  There are several models of m6 ENVY

  ENVY m6 -?

  This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
  This is a link to the HP support site to download drivers

  And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems

  Looks like something to remove the registry entries for the driver

• The BIOS update does not work on the Satellite - cannot load PHLASHNT.sys

  "Cannot load the PHLASHNT.sys driver.
  It gives then a few silly respons to check if you have admin rights or not.
  Under windows, very nice everyone has admin right here, that the problem with this :-/

  Hello Clemens,

  PHLASHNT. SYS is flash Phoenix NT driver that is necessary if you're updating a Phoenix BIOS. However, you don't tell what Satellite phone model you update or what version of the BIOS update you are using (Windows or traditional). Please send additional information so that we can try to help you with your problem.

  Kind regards

• Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

  Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

  My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

  I think that it is also affecting my internet connection and disrupt its speed.

  Can you please help with this question?

  Thank you very much
  Tony

  Hi Tony,.

  You can try reinstalling the device driver and check if it works.
  Uninstall and reinstall the device in Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. Locate the Microsoft ISATAP Adapter device
  c. right-click on the device and select uninstall
  d. restart the computer and check.

  You can also consult the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520

  Hope this information is useful.

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Firefox cannot load Web sites administrator

  Firefox cannot load websites administrator. I get a blank page

  Firefox load website but not the administrator. None of the websites administrator

  See the link in the first answer, http://support.mozilla.org/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?

• Qosmio X 870-14 G - 8 Windows cannot load drivers

  QOSMIO X 870-14 G WITH WINDOWS 8 CANNOT LOAD DRIVERS for USB - IF USB HOST CONTROLLER xHCI (CODE 31). REINSTALLING DRIVERS DOES NOT RESOLVE THE PROBLEM AND REINSTALL WINDOWS 8 DOES NOT SOLVE THE PROBLEM OF TOO.

  IS THERE A SOLUTION TO THIS PROBLEM?

  >... REINSTALL WINDOWS 8 DOES NOT SOLVE THE PROBLEM OF TOO
  Have you reinstalled original recovery image and tried to launch Notepad with the factory settings?
  Have you noticed this error on the first day of use?

• FF3.6.15 update now cannot load gmail page

  I have been updated two days ago and now cannot load Gmail login page to conclusion. it sticks right to the end, then after a minute or two, he says to recharge or switch to html format. If I recharge it works instantly, I do not know what is the html code, so don't try not... someone can tell me why this has happened to Gmail and when updated FF. ? help much appreciated.

  They were referring to the Gmail Help Center. Their help topic about Gmail is slow can be found here - http://mail.google.com/support/bin/answer.py?hl=en & answer = 80446

• Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

  I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

  The error number (11122) cannot load the bitmap file. Height max = 100

  The hard drive has now been deleted and I can't sent this message to reformat.

  Can someone help me on this please.

  Hello

  Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

  Have you noticed a similar problem before?
  Are you using the original disk or some copy?
  Is there a problem with the HARD drive?

  Please do a little bit more about these things.

• Re: Tecra 8100: CD-Rom does not - W2k cannot load drivers

  Hello

  I have Windows 2000 on my Tecra 8100. For two days, my cd-rom doesn't work anymore, because Windows cannot load one or more drivers.
  I did nothing special, except a game and using word and excel.

  Anyone got a solution for the problem, because I do not know much about computers.

  Additional info:
  Windows 2000 SP3

  CD-ROM:
  TEAC-CD224E-BA

  Kind regards

  Martijn

  Hello

  Sorry, but it will help get more info on CD/DVD drive.
  Optical drive is listed in Windows Explorer?
  What is the status in Device Manager?

• Intel Pro/Wireless 3945ABG cannot load the driver

  Wireless worked fine since I bought this laptop

  Now it has stopped working and has a yellow exclamation mark in Device Manager - it says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  So I uninstalled the device and check the box that says "Remove the driver for this device", then reinstalled the latest version of the driver on the Toshiba site 11.5.0.32.

  Windows Vista detects new hardware and install the driver, but fails with 'Windows found driver software for your device but encountered an error trying to install it. The system cannot find the file specified. "

  All ideas

  Remove the wireless network adapter in the device, download manager driver the latest from Intel page and repeat the procedure of installation of the driver.

  Good luck

• Cannot load Windows 7 - Satellite C660 guard freezing

  Hello world.

  This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop without Windows installation disc. Last week, it has become very slow, the interface resembles that of the interface of safe mode, then finally, he became completely unresponsive, therefore, through F8 on start-up I selected the option to return to the factory settings (I have this option)

  The BACK screen appeared and started normal loading then who responded, then I rebooted only to see Windows starts for the first time and carry the load, before that I had to create a cd boot from my other laptop to reboot the system that I had lost the boot mngr.

  The last part of the installation process begins whereby a white Toshiba screen appears with a green progress bar which is responsible for some drivers (see attachment). There are 39 steps to this process and I remember before the computer should keep restart itself, but it keeps freezing after about two steps. I kept turning it off and eventually the locked system administrator accounts.

  Once more, I restarted the PC, but this time in safe mode, the operating system did in fact load in safe mode and I created a few new accounts with administrator privileges, however, I still cannot load all of the operating system because it keeps freezing during the last part of the process.

  I have very limited knowledge of loading operating systems, so any help would be greatly appreciated.

  Hello

  First of all, it was a big mistake NOT to create a recovery disk Toshiba.
  The recovery of HARD drive that you were able to start pressing F8, is only possible if the HARD drive is not defective.
  I think in your case I think that there is something wrong with the HARD drive because there was a Bishop of startup notification which means that this laptop can not find a boot manager to boot the system.

  I have no other idea about trying to reinstall the system using the Toshiba Recovery disk or another drive in Windows 7 (of course if you have one)
  If the recovery fails, you will need to investigate on how much material could be affected. I think in this case it of needed to start with HARD disk check.
  Possibly the HARD drive needs to be replaced. Of course it is possible that I m wrong part is affected, but at the first step you should check the new installation of the OS.

  A recovery disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A200 - cannot load the keyboard and touchpad drivers

  Hello

  I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
  My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
  In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

  i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

  My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

  I tired restore my laptop
  LAST GOOD CONFIGURATION
  Apply unsigned drivers
  Safe MODE (does not work yet)

  Downloaded some software like driver detected etc, but... NO RESULTS.

  I don't want to go for WINDOW RECOVERY CD for OS to re - install
  I have a large number of parameters, I don't want to erase...

  IS THERE A SOLUTION FOR IT?

  My warranty ended already after one year

  pls help and answer...

  That s a great info. Thanks for the clarification!

  Good bye