Cannot load the microsoft update

Similar Questions

• error 0x8024d007 cannot load the microsoft update

  error 0x8024d007 cannot load the microsoft update

  http://support.Microsoft.com/kb/956701

  The above should help

• Cannot access the Microsoft Update Site

  I get the following error message when you try to access the update site:

  Microsoft Update could not be installed on your computer
  

  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

  Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.

  [Error number: 0x800A01AE]

  I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}).  I have a small home network wireless, but have no defined group policy (no server - just-to-peer).  The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).

  I don't quite know what to do next.  I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).

  Any help you can give would be greatly appreciated...

  BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.

  Thank you!
  Lorien - a - MCSE/MCSA/network + / A +.

  Hello

  You try to go actually on here Windows Updates site?

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
  sites I posted for you last time.

  Absolutely do not use the default Administrator account. Just make a new Admin account to
  use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
  According to the needs. If your sole administrator corrupts you will have a big headache.

  -------------------------------------

  Run the Windows updates to reset and

  Do the two of them:

  How to reset the Windows Update components? a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  ------------------------------------

  If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
  problem updates.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Cannot access the Microsoft Updates Web pages

  using XP Home Edition on a laptop. Victim of a crisis (virus/trojan/worm - don't know what) in the new year, she launched the system restore and all of the restored data.  Downloaded AVG to analyse the system, checked MS Security Center and I saw it worked not - says, he had been arrested.  Much research for corrections, tried several of them, including uninstall AVG and other scanners, antivirus, installation SP 3 and MS Security Essentials and all other MS security downloads I could find.  Still no access pages of MS update, always "THIS webpage IS NOT AVAILABLE".  Also downloaded mpam - fe.exe and MPAs - fe.exe but does not - get access denied when select current to run user.  How can I get updates MS if I can't access Web pages?  I don't know what updates I've missed.

  Mosty likely, the computer can be infected by ROOTKITS.

  Try TDSSKILLER to find rootkits.

  Download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe>

• Can't do the microsoft update error code 0 x 80090305

  Running XP Pro SP3 - cannot do the Microsoft Update error code 0 x 80090305

  0 X 80090305 SEC_E_SECPKG_NOT_FOUND

  I suggest you follow the steps in the link below and check if it will help:

  http://support.Microsoft.com/kb/836941/en-us >

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

  Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

  My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

  I think that it is also affecting my internet connection and disrupt its speed.

  Can you please help with this question?

  Thank you very much
  Tony

  Hi Tony,.

  You can try reinstalling the device driver and check if it works.
  Uninstall and reinstall the device in Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. Locate the Microsoft ISATAP Adapter device
  c. right-click on the device and select uninstall
  d. restart the computer and check.

  You can also consult the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520

  Hope this information is useful.

• "Microsoft Update" cannot install the downloaded updates

  CURRENT SITUATION (11 October) - PC with Windows XP Pro.

  -To access the site MicrosoftUpdates (with IE8) is OK (yesterday almost impossible;) Very slow PC).

  -"Search for updates for this computer" is possible, but it takes a long time before the list appears. Most people with this same problem think it hangs, with the activity display bar process for eternity, never finishing. But I just think, they are not patient enough, because it's really time consuming.

  -Meanwhile, the CPU takes almost 100% of the activity, caused by service a specific svchost.exe , which I identified as 1436 service id. (EDIT: maybe it was actually 1644 as I see today)
    \system32\svchost.exe - k netsvcs
   
  All updates are detected for installed software and are shown in the usual categories. The installation of each of the updates appears one by one.  However immediately after fact following a message that lists updates whose installation failed (usually 100% fail to install for now)

  What I have:

  1. I checked 3 services to ensure that the correct settings
  -Implemented automatic update (automatic, started)
  -EventLog (automatic, started)
  -BIT was missing, but I managed to install it again

  Not without effort, I found these guidelines:
  http://helpdeskgeek.com/how-to/Background-Intelligent-Transfer-Service-will-not-start/

  Now the BITS he listed (with auto-start), but it fails to start, even manually!
  If I concentrate on the BITS service (could not be started) this may to solve the "problem of update.

  2. I started Windows PC files check sfc/scannow and restarted the system (nothing wrong detected or corrected... I think)

  3. change of standard browser from Firefox to IE8

  Thank you for the help

  Thanks Nirmal S,

  I apologize for not having mentioned earlier that this problem has been resolved.

  FYI, I use Avast! Antivirus (free version). No malware was involved, but thanks for the useful information.

  I found a ready-made channel to reinstall the BITS service, which apparently takes care of a few other things in the registry.  I do not understand what it does, but it worked for me.

  Current situation:
  -Little service is installed and is now ok.

  -The Microsoft Update site updated analyses required for the installed software/hardware and displays a list. It downloads the installation of each update program, but not an update can be installed.

  
  Since the fundamental problem, I recently started a new separate topic for the same question,
  to avoid a much too long discussion here. However, if someone wants to add suggestions hereanyway, you're welcome. Thank you

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">