Cannot open mailboxes mailbox or call

Similar Questions

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• Cannot open Windows XP Mode, calls the get to enter the credentials and password.

  Original title: Trying to open the Virtual Machine to Windows XP my Windows 7: now, I get a request for 'XPM user, credentials and password' why all of a sudden?

  updated my Windows 7 Home Premium, professional, allowing me to install the Virtual Machine Windows so I could have access to Windows XP.  It has worked fine for several weeks until today.  Now I can't open Windows XP Mode due to a demand for Windows security.  I get a screen titled security of Windows asking me to "enter your credentials", a box entitled "XPM User" and asks for a password.  I did two system restores (two points), but it has no effect.  I always get the demand for security.  I have no idea whence this XPM user thing.  How to get back to normal?

  Hi Don,

  I suggest you try the steps suggested by Divya R in the following thread, which deal with similar topic.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/removed-XP-mode-password-in-Windows-7-and-now-cant/0f9d0ded-dea5-4B6F-ba75-db0a78a4b3de

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Software update new cannot open applications

  Model: Macbook Air 6

  Recently updated software (Mac OS X 10.10.5)

  Restart, but now I "problem report for Finder" on the loop. Says "Finder close unexpectedly. This report will be sent to Apple. "

  I click OK but the message just re-.

  Cannot open the application Photo booth, FaceTime, or even the App Store, Mail, Notes, Google Chrome :/

  Only things running are Safari and iTunes.

  I have no idea what I did wrong. Desperately need help!

  Hello mia_sn,

  Thank you for using communities of Apple Support.

  I see from your post that you have a problem with the Finder leave unexpectedly, and that causes a problem with the opening of some applications. I know how it is important to ensure that you have access to all your applications. I have a couple of things I want you to try.

  First of all, try to start your computer in safe mode. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs some checks, check your startup disk and prevents certain software from loading automatically or opening. The following article will help you start in safe mode:

  OS X Mavericks: start in safe mode

  Once you're in safe mode, test and see if you can open these applications. After that, give your computer a fresh reboot and then log in normally and test again.

  If you continue to have a problem, try to test in a new user. Test in a new user account can help circumvent the problem of your main user account. This article will help you set up a new user:

  OS X Mavericks: set up users on your Mac.

  Once you are in a new user account, see if you get the same result when opening these applications.

  Best regards.

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Safari will not open a Web site, open to all others. I checked with chase, the site that I can not open, they said that their system works. I closed the computer. The message I get is "" Safari cannot open the page because the unexpected server ""

  I have a mac-mini end 2012, OSX El Capitan 10.11.3, 2.5 GHZ intel core i5, 116 GB 1600 MHZ, DDR3

  When I connect to my Chase account using 1Password, I get the message "Safari cannot open the page because the server has quit unexpectedly the connection, try again later".

  I called Chase, their system is working normally. I rebooted the computer twice, I have tried for 3 days now.

  I went to Safari/Preferences, deleted cookies etc. All to nothing does not.

  Ideas?

  Have you signed up with before Safari?

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Cannot open the link in a peer-to-peer network

  I created a peer-to-peer network between two equipped PDA to Windows Mobile 5.0. It is shown that two of them were connected, and their IP addresses are assigned automatically.

  But when I used the function of TCP/IP Open, it returns an error 10060 "cannot open connection". I miss something here? It should be a simple connection.

  The IP address 169.254.x.x, this is what is called a "auto assigned IP.  Which means that the device is set to get an IP from a DHCP server, but when he cannot find a DHCP server, it takes an IP address.  This allows to have an address on the computer network, but likely to be on the same subnet are not likely.  Also, the 169.254.x.x will change each time the computer restarts, or the NIC decides to try to obtain an IP address again.  It is never a good idea to use an IP address auto assigned in the communication of data, because these problems undelining.  If you do not connect to a DHCP server, it is always better to set a static IP address.

• on xp family. Windows cannot open help and support because a system service is not ongoing enforcement.

  Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support

  lhthomas,

  Welcome to the Microsoft Answers community.

  In doing research, I found this article in which people have found a solution:

  Help and support-Service not started

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Cannot open outlook... .icons disappeared, perhaps sys. files also tried restoring, no luck

  I uninstalled a program called Flash Player free from GNU, and it took my files system with it. Now, some of my desktop icons won't work and will change to paint miniatures of program. My outlook express open used... error says "windows does not recognize this file etc... When I select a list, it will not always be open. Tried to change the outlook properties icon, but it will not change. In the Explorer, some say 'empty' and other files appear in blue! Lost my recovery disc. Tried system restore, but still no luck. Used the drive to factory settings, but they do not work.

  Hello

  I suggest you follow the steps mentioned in the article below.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859/en-us

  See also the article mentioned below.

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  http://support.Microsoft.com/kb/923077/en-us

• TWAIN with Officejet 6700 problem - cannot open TWAIN device default

  I'm having a problem with my online banking application to open default device TWAIN (Officejet 6700 Premium) to allow a check I want to file online scan. The application installs an add-on Internet Explorer called EZTwainX by Dosadi (version 1.64b7). However, when I click on the scan button to scan the front of the cheque, I get a message "Cannot open default peripheral TWAIN".  Any help to fix this would be appreciated.

  My computer is a Dell 530 running Windows 7 64 - bit OS (recently installed).

  Internet Explorer 11 (version 11.0.9600.17041). I guess IE is 32-bit position where he doesn't explicitly say 64-bit in Help - about Internet Explorer.

  HP Officejet 6700 Premium also recently installed in Win7 64-bit environment.

  Note: Before the recent installs above I not had this problem on Windows XP SP3 using the HP Photosmart C7280 AIO printer.

  DanS10

  Hi Provost,

  I am able to scan documents or photos using the HP software.

  And I checked control panel - uninstall. Bandoo neither Movie toolbar are installed.

  On a hunch, I decided to download Java again. He said that I had already installed the latest version but I re-installed anywaye I did it, I am now able to file online using the TWAIN of Java Applet. My TWAIN problem seems to be solved with the resettlement of Java SE Runtime Environment 7 update 55 (32 bit).

  I thank very you much for your reply and recommendations.

  DanS10

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Windows cannot open this file .json

  In joomla 2.5.6, when you try to download an image from the file button I get this error message in Internet Explorer 9 - Windows 7 Professional
  : Windows cannot open this file:

  file: .json joomla (3)
  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look it up automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  Use the Web service to find the appropriate program
  Select a program from a list of installed programs.

  If anyone can suggest how I can fix this I would be very happy.

  Thank you

  P.S. This has happened after calling Microsoft this morning and ask for help with another problem with script. The technician who took control of my computer doing something, and since then, nothing works properly!

  Hello

  Method 1
  JSON is a java file. or JavaScript Object Notation, is an open standard based on text designed for the exchange of human readable data. It is derived from the JavaScript scripting language to represent associative arrays, and simple data structures called objects. Despite his relationship with JavaScript, it is independent of the language, with parsers available for many languages.

  If you want to open. You must have Java installed on your computer the JSON file. If you have java installed on the computer I suggest you to try the steps from the following link:

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2
  I also suggest to run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.