Cannot open my external drive; message on FAT32

Similar Questions

• clone hard drive to external memory now cannot open the external file "corrupted" States how can I get it

  Tried to make the backup file all data on my hard drive for external memory with a capacity of 450 G. Message said two blocks of data on hard drive... now I can't open the external memory... file States corrupt... a way to overcome this obstacle and recover the data that was on the external drive until I tried the back-up... r must I clean the external drive? o

  Hello

  Method 1:

  Right-click on the external hard drive in Windows Explorer, click Explore, see if you can recover the files.

   

  Method 2: Check the hard drive for errors.

  Reference:

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Windows XP cannot reformat my external drive to seagate expansion of exFAT

  I'm trying to reformat my external drive to seagate expansion of exFAT with windows xp, but I have "windows could not complete the format". So I reformatted it on another computer and now my usual computer XP even open the drive or reformat.

  Hi GoGadget,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to locate the external drive in Device Manager and check the status.

   

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

  Method 2: You can try to change the drive letter and check if the problem still persists.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

  I hope this helps.

• After a black screen with a cursor, the performed system restore, now cannot open programs, USB drive

  Original title: Windows 7 Home Edition

  Yesterday, my pc only has a black screen with a cursor. I tried to restore on another point but then after starting upwards and put my password, I get the home screen but cannot open any programs. I can't use the USB stick or cd / dvd drive so how should proceed to solve this? I can't put my external modem to make a back up and I really want to fix this without losing all the data on my pc. I can run programs in safe mode and windows installation disc opens in SafeMode as well, however I can't set safe mode.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Cannot play mp4 external drive, but still flow to 35.0 stuff

  35.0 running on windows 7 pro.

  I want to be able to play mp4 external drive and continue to spread. I could do this before updating 35.0 when I put media.windows - media - foundation.enabled to false. Now, it seems that I need to adjust the two who and media.play - stand alone to false, and then mp4 will open in media player classic (as I would like to). But the tumblr.com streaming will not work. He's right there.

  Here's the test:
  1. http://download.wavetlan.com/SVV/Media/HTTP/H264/Talkinghead_Media/H264_test1_Talkinghead_mp4_480x360.mp4
  Need to download and then play in an external player

  2. http://crossfirezine.tumblr.com/post/108731776691/henry-fox-has-a-dope-new-edit-up-for
  must broadcast, not just stand there. (it broadcasts if the two configs above are true)

  Configuring the application for mp4 to Media Player Classic seems to have no effect on the first event unless I do the topic: config changes, what jumps do test 2.

  This has worked before the update 35.0, whereby time firefox crashed and I lost ALL my settings configuration. Not sure why this has happened. Now, I can't get it working again.

  Thank you

  EC

  Please let "media.windows - media - foundation.enabled" on true and ' media.play - stand alone "on fake...

• Cannot open certain e-mail messages. He askes me to define an association in the Control Panel, but do not know how to configure...

  Remember - this is a public forum so never publish information such as email or phone numbes:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Monday, January 31, 2011 19:44:07 + 0000, granny, sharon wrote:

  * Remember - this is a public forum so never publish information such as email or phone numbe * s:

  * You have problems with programs * error messages * recent changes made to your computer * that you have already tried to solve the problem

  Please, in the future, remove all the verbiage above when you ask for a
  issue. It has nothing to do with your question. And ask your
  questions in the body of the message, not in the title. The title
  should be used only for a brief description of what is the question
  everything.

  You say 'impossible to open certain emails', but makes the rest of your title
  It sounds like you can open the e-mail message, but you cannot open
  the accessories that come with them. Is this correct?

  If that's right, read the following:

  To open a file (if get you it as an attachment or any other)
  by the way), you must have an appropriate program installed for him (be it
  the program that created the file or a compatible program). So if you open attachments depends on what kind of files (the
  extension, the characters after the dot at the end of the file name)
  attachments are.

  If you get the files .doc or .docx, these were created by Microsoft Word
  (or a compatible program) and to open them, you need Word, or
  compatible program. Microsoft Office Home and Student includes Word.
  You can also use OpenOffice (free software that is largely compatible
  with Microsoft Office), WordPerfect, etc. Or you can download and
  Install the free Microsoft Word Viewer
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en
  or http://tinyurl.com/2w3s6z the viewer will allow you to read existing
  files, but not create or modify them.

  To open .pdf files, you need a viewer pdf and Microsoft Office Home
  and student will not help you. The standard pdf viewer than most people
  the use is Adobe Reader, and you can download free of charge
  http://get.Adobe.com/reader/

  It is more likely that you don't have a proper file installed
  that you don't have the correct association, but if a
  an appropriate program is installed, just right click on any file .doc
  and choose open with. Highlight and select Word, select the check box
  "Always use this program...". "and click OK. It should work fine
  from then on it.
  The above paragraph is how do to the files .doc and Word, but for
  other types of files, replace .doc with the extension of the file type and
  Word with the appropriate program.
  If you try in vain to open other types of attachments,
  Please tell us what types of files they are.

  Ken Blake, Microsoft MVP

• Cannot open DXF files, incorrect message error etc etc thanks file

  Cannot open DXF files, invalid file error message etc.   Thank you

  start learning says:

  Cannot open DXF files, invalid file error message etc.   Thank you

  You have installed AutoCAD?  It is the application most frequently associated with DXF files.  Other applications that are running are Image PSP, Fh7, and Micrografx Picture Publisher.

  http://FILExt.com/file-extension/DXF
  --
  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest killed a large number of philosophers.
  ~ Denis Diderot

• Cannot access an external drive on the network

  I have a network problem. I have a Dell 640 m laptop, Vista Ultimate SP2 32 bit, Windows Defender, Malwarebytes, Vista Firewall, Kaspersky AV 2009.

  I have my laptop and my office in the same working group. I can not access my 200G Iomega external for my laptop. It is connected to my desktop dell running XP SP3, Avast Pro, Malwarebytes, Windows Defender and Windows Firewall. I have two internal drives on my desktop mapped and accessible from my laptop. I also have the printer connected to the netwoked desktop from my laptop and it works fine. I have sharing enabled for the external drive.

  When I click on the external drive in the folder 'Network' of my laptop or when I try to map it I get the following message

  \\DELL-DESKTOP\Iomega on Dell desktop computer is not accessible. You could
  are not allowed to use this network resource. Contact the
  Administrator of this server to find out if you have access permission.

  Not enough server storage is available to process this command.

  It sounds like a setting on the XP machine for "simple file sharing". I think that you have to turn this configuration / OFF explicit sharing on each item you want shared. On a Pro machine, it's an easy setting

  Q303248 - computer management commands are not available with active Simple file sharing:

  A XP Home machine requires the CACLS utility usage:

  162786 - capacity of undocumented CACLS group permissions:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• InDesign Mac CC: "cannot open resource file' popup message when loading a feather in my plugin

  We have a pretty simple plugin for InDesign, which we have maintained since the time Pre-cs.  We would wear to CC.  Everything works on Windows and Mac, with one problem.

  The plug-in displays a file save dialog box, which is customized with a couple of additional controls for additional information from the user on the exported file.  As far as I know, there is no way to do it with the InDesign SDK directly, so we do it with code specific to the platform and resources.  Under Windows, we have this by calling GetSaveFileName in the Windows API and by setting a custom resource .rc and "hook" function with OFN_ENABLETEMPLATE and OFN_ENABLEHOOK.  On Mac, until CC InDesign, we asked the function of carbon NavCreatePutFileDialog, with a style file old Pier and an event proc handling kNavCBCustomize and al.  This has all worked for a long time great.

  However CC InDesign on Mac is 64-bit only, and carbon will not work with it.  So, we took the leap in cocoa and put implement with [NSSavePanel setAccessoryView:], where load us a NSView custom from a pen integrated into our bundle of plug-ins.  And it works very well also.  However, when the plugin code call [NSNib initWithNibNamed:bundle:], InDesign CC appears a warning message saying: "Cannot open resource file."  However, the resource (the pen) is obviously loaded correctly.  Thus, the user must dismiss this apparently false alert box before being able to move forward.  Once the alert is dismissed, the NSSavePanel works very well, with our custom NSView.

  I can say that the popup alert just InDesign itself, rather than a subsystem of Mac underlying as cocoa, because he has the title of "Adobe InDesign" and the gray dark background as the rest of the CC of InDesign and the OK button has an orange highlight around it.  It is clearly not a standard thing of Mac as a NSAlert.  And if I do the same calls to [NSSavePanel setAccessoryView:] et al. in a stand-alone application, obviously no this popup appears.

  It seems that somehow our call to load the file Nib triggers some kind of hook in InDesign.  My guess is that it's a hook for InDesign load its own resources, which is hanging by mistake in features our plug-in.

  I tried two approaches to load the Nib enumerated file here:

  http://StackOverflow.com/a/5855561/3207828

  And they both work, the pen is responsible and we can get our NSView to it and use it in the NSSavePanel.  But if we call [NSNib initWithNibNamed:bundle:], or [NSViewController initWithNibName:bundle:], CC InDesign displays the message box as soon as the call to load the pen is made.

  Why InDesign CC showing the message 'Cannot open resource file', and how can it be prevented?

  Thank you

  Dan

  I thought about it.  The problem was the plugin code to create a ResourceEnabler object, which is needed by older versions (CS *) of the plug-in on Mac to locate resources .rsrc for the call of NavCreatePutFileDialog of carbon with the carbon resource custom.   I #ifdef'd out so that the ResourceEnabler object is not created during the generation of Cocoa 64 bit for the CC and the offending message popup no longer appears.

  I do not understand why the ResourceEnabler object is needed for carbon, resources of the plug-in to the top of the stack of the resource, but I do not completely understand why the presence of the ResourceEnabler object would have an effect on a call from cocoa to [NSNib initWithNibNamed:bundle:], which also works fine.

  Note that simply create the ResourceEnabler object does not trigger the popup even if the bundle of plug-in contains no carbon resources to move to the top of the stack.  It's only when I go to load the Nib file that the ResourceEnabler seems to want to get involved and complain that it cannot find anything.

  So if anyone from Adobe is reading this, I would say that set you the ResourceEnabler feature so that it does not interfere with loading crane of cocoa.  It is perhaps best to just do the ResourceEnabler a no - op in InDesign CC.

• Cannot open links in Safari, Messages, messages, Notes and other applications.

  Problem on the iPhone 6 and iPad pro since version 9.3 I can't open links in Safari, Messages, messages, Notes and other applications. Rather than visit the target website, the application crashes, freezes or crashes.

  How to fix bug of broken links ios 9.3 safari/mail:

  (1) find and uninstall the application of booking.com, if you

  (2) wait at least 1 hour, the bug disappeared. Perhaps you need to reboot once

  to reproduce the bug again: install the app booking.com

• Cannot open files *.exe - error message

  Deleted.

  Hello jbautista83,

  I'm sorry that I did not understand your question correctly. Read the article below for Windows XP that cannot open .exe files. This means to make a change in the registry.

  Article number: 555067 - cannot open EXE files
  http://support.Microsoft.com/kb/555067

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Thank you

   
  Marilyn

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• Cannot open my external hard drive

  Hello

  Reinstall everything my laptop with Windows 7. Bought a new Toshiba external hard drive and I connected it. The laptop was able to detect the device, but I can not open the device. What should I do?
  Thanks for your help!

  It has no letter... managed to get help and apparently I needed to go to the control panel and assign the letter.

  Thank you for your answer! :)

• When open the external drive, Windows Photo Gallery opens

  I'm simply trying to reinstall my hard drive external and had the same message.  After connecting my hard drive, open windows photo gallery.  I have nothing to indicate that my moment of Memeo Backup is installing another opening.  Just the Windows Photo Gallery tells me it can't open this photo or video.  I use Vista.  I attempted to locate and download updates to photo gallery, but have not yet found.  What do you suggest me?

  Hello

  It sounds like you have auto play active for their external hard drive:

  http://support.Microsoft.com/kb/967715

  You will need to change or disable this feature for this photo gallery Windows only opens every time that they connect the hard drive.

  It will be useful.