Cannot ping my VM vCenter

Similar Questions

• SMU 8135 cannot ping pc when installing labview

  HJ. Help me

  my laptop do not install labview 2012 can ping with SMU 8135 but labview installed on my laptop cannot ping with SMU 8135. I don't understand

  Hi ffefef,

  Could you explain in more detail the question, you encounter?

  Thank you

• Cannot ping router

  I can't ping my router or other device on my network, and can't connect to the internet.
  I can ping myself or the local host.  I use a wireless connection. The wireless connection icon shows the status connected with a staff of excellent.
  I ran the Diagnostics network and everything he told me that if he failed because he cannot ping the router and DNS servers.
  I don't know why.  Can someone tell what to do next?

  Solved.
  If you missed all info, all you had to do was ask.  I don't remember do not provide that whatever it is asked.
  In any case, I tried to connect an ethernet cable from the vrouter in it mobile and connected to the network immediately ITI.
  I don't know why the diagnosis doesn't have to indicate the wireless card has been a problem.  It shows that its correct operation.  Now, I even once to download and reinmstall Norton.  I hope their support will provide me with the correct key.  I'm happy I don't have to wast of countless hours to redo my network addressing scheme works.
  Thanks for your time.

• WAG320N - LAN clients cannot ping clients WLAN.

  Hi all

  I wonder if you can help. I currently have a router WAG320N, which seems to work out for a small problem.

  However, the problem I am facing is that my LAN clients cannot ping my clients wireless and vice versa.

  I googled this problem which has recommended that the AP isolation is off which is was by default.

  Any other ideas?

  Thanking in advance.

  Sprite

  As you are not able to ping customers wireless to wireline customers. Turn on the isolation of the AP.

  See if that helps you.

• Once the VPN connection is established, cannot ping or you connect other IP devices

  Try to get a RV016 installed and work so that people can work from home.  You will need to charge customers remote both WIN XP and MAC OS X.

  Have the configured router and works fine with the VPN Linksys client for WIN XP users.  Can connect, ping, mount the shared disks, print to printers to intellectual property, etc.

  Can connect to the router fine with two VPN clients third 3 for Mac: VPN Tracker and IPSecuritas.  However, once the connection is established, cannot ping the VPN LinkSYS router or any other IP address on the LAN Office.  Turn the firewall on or off makes no difference.

  Is there documentation anywhere that describes how the LinksysVPN for Windows Client communicates so these can be replicated in 3rd VPN clients from third parties for the Mac in OS X?

  The connection with IPSecuritas and VPN Tracker is performed using a shared key and a domain name.  It is not a conflict of IP address network between the client and the VPN 192.168.0.0/24 network.

  VPN Tracker and IPSecuritas are able to connect to the routers CISCO easy VPN with no poblem.

  Any ideas on how to get the RV016 to work for non-Windows users?

  We found and fixed the problem, so using VPN Tracker or current IPSecuritas on OS X people have access to the LAN via the RV016 machines. The "remote networks" in the screen BASE in VPN Tracker has been set on the entire subnet: 192.168.0.0/255.255.255.0 the in the RV016 has been set to the IP of 192.168.0.1 to 192.168.0.254 range. Even if the addresses are essentially the same, without specifying the full subnet in the RV016 has allowed the connection to do but prevented the VPN client machine to connect because the RV016 would pass all traffic to the Remote LAN. Change the setting of 'local group' in RV016 settings in the screen "VPN/summary/GroupVPN', 'Local Group Zone' for the subnet 192.168.0.0/24 full solved the problem.

• Cannot ping Lan devices in Vlan

  Hello

  I looked for a solution to this for the week without success. I came across a Cisco C3560, which is used because of its ability of poe to power some Deskphones Voip. While the works of great poe, machines connected to the switch can only communicate with each other and don't can't ping or otherwise access any device connected directly to the router of the network.

  The Cisco switch is configured with a vlan and a default gateway, but nothing comes out by behind the switch. On connected devices can ping by default gateway (192.168.0.1 - a tp-link router), receive a lease dhcp from the router said successfully and can connect to the internet, but on the local network, nothing works. (unable to connect to the printer connetced directly to the router or other computers connected directly to the router.

  Any advice? I am new to cisco switches, don't know what I'm doing here. I'm just trying to get devices that are connected directly to the switch to communicate with devices connected directly to the router.

  Switch#show runBuilding configuration...

  Current configuration : 1528 bytes!version 12.2service configno service padservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname Switch!enable secret 5 {}{}{}{}{}{}{}{}{}{}{}{}!no aaa new-modelclock timezone UTC 2system mtu routing 1500ip subnet-zero!!!!no file verify autospanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!interface FastEthernet0/1!interface FastEthernet0/2!interface FastEthernet0/3!interface FastEthernet0/4!interface FastEthernet0/5!interface FastEthernet0/6!interface FastEthernet0/7!interface FastEthernet0/8!interface FastEthernet0/9!interface FastEthernet0/10!interface FastEthernet0/11!interface FastEthernet0/12!interface FastEthernet0/13!interface FastEthernet0/14!interface FastEthernet0/15!interface FastEthernet0/16!interface FastEthernet0/17!interface FastEthernet0/18!interface FastEthernet0/19!interface FastEthernet0/20!interface FastEthernet0/21!interface FastEthernet0/22!interface FastEthernet0/23!interface FastEthernet0/24 switchport mode access!interface GigabitEthernet0/1!interface GigabitEthernet0/2!interface Vlan1 ip address 192.168.0.26 255.255.255.0 no ip route-cache!ip default-gateway 192.168.0.1ip classlessip default-network 192.168.0.0ip http server!access-list 1 permit any log!control-plane!!line con 0line vty 0 4 password XXXXXXXXX login length 0line vty 5 15 password XXXXXXXX login length 0!end

   Switch#show interface

  Vlan1 is up, line protocol is up Hardware is EtherSVI, address is 001e.bd27.c4c0 (bia 001e.bd27.c4c0) Internet address is 192.168.0.26/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 3 packets/sec 138534 packets input, 9472693 bytes, 0 no buffer Received 0 broadcasts (68 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 30296 packets output, 2248820 bytes, 0 underruns 0 output errors, 1 interface resets 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/2 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c484 (bia 001e.bd27.c484) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:56, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 46000 bits/sec, 37 packets/sec 5 minute output rate 582000 bits/sec, 71 packets/sec 1941044 packets input, 327622438 bytes, 0 no buffer Received 38375 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 30699 multicast, 0 pause input 0 input packets with dribble condition detected 3224783 packets output, 2069682884 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
  
  FastEthernet0/4 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c486 (bia 001e.bd27.c486) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:01, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129069 packets input, 64947010 bytes, 0 no buffer Received 9953 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 600269 packets output, 45540585 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/6 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c488 (bia 001e.bd27.c488) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:50, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 32693 packets input, 4244428 bytes, 0 no buffer Received 9942 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 588460 packets output, 45003331 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/8 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48a (bia 001e.bd27.c48a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:30, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32694 packets input, 4243413 bytes, 0 no buffer Received 9934 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9757 multicast, 0 pause input 0 input packets with dribble condition detected 588485 packets output, 45009466 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/12 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48e (bia 001e.bd27.c48e) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:28, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32742 packets input, 4252075 bytes, 0 no buffer Received 9947 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9763 multicast, 0 pause input 0 input packets with dribble condition detected 588497 packets output, 45019272 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/13 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48f (bia 001e.bd27.c48f) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:13, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 148160 packets input, 73818106 bytes, 0 no buffer Received 9973 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9760 multicast, 0 pause input 0 input packets with dribble condition detected 599666 packets output, 49045070 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/14 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c490 (bia 001e.bd27.c490) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:05, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129165 packets input, 68409495 bytes, 0 no buffer Received 9982 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9773 multicast, 0 pause input 0 input packets with dribble condition detected 600283 packets output, 45551497 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/18 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c494 (bia 001e.bd27.c494) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:49, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 21000 bits/sec, 18 packets/sec 5 minute output rate 13000 bits/sec, 16 packets/sec 606386 packets input, 88151136 bytes, 0 no buffer Received 159883 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 55198 multicast, 0 pause input 0 input packets with dribble condition detected 941617 packets output, 308269004 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/20 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c496 (bia 001e.bd27.c496) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:54, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 1000 bits/sec, 1 packets/sec 5 minute output rate 1000 bits/sec, 2 packets/sec 515813 packets input, 87006769 bytes, 0 no buffer Received 21466 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 19952 multicast, 0 pause input 0 input packets with dribble condition detected 1858112 packets output, 1700009146 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  FastEthernet0/24 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c49a (bia 001e.bd27.c49a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 546556 packets output, 41182636 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out

  GigabitEthernet0/1 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 001e.bd27.c481 (bia 001e.bd27.c481) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not set Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX SFP input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 556000 bits/sec, 83 packets/sec 5 minute output rate 76000 bits/sec, 63 packets/sec 4457827 packets input, 3961330567 bytes, 0 no buffer Received 15028 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 11213 multicast, 0 pause input 0 input packets with dribble condition detected 3822373 packets output, 728132696 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
  
  

  Switch#show vlan

  VLAN Name     Status         Ports---- -------------------------------- --------- -------------------------------1     default active    Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12, Fa0/13, Fa0/14, Fa0/15, Fa0/16                        Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21, Fa0/22, Fa0/23, Fa0/24, Gi0/1, Gi0/21002 fddi-default act/unsup1003 token-ring-default act/unsup1004 fddinet-default act/unsup1005 trnet-default act/unsup

  VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 01002 fddi 101002 1500 - - - - - 0 01003 tr 101003 1500 - - - - - 0 01004 fdnet 101004 1500 - - - ieee - 0 01005 trnet 101005 1500 - - - ibm - 0 0

  Remote SPAN VLANs------------------------------------------------------------------------------

  Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------

  Hello

  first thing, please edit your post and remove your remote vty lines access password

  never send passwords on a public forum for the just in case production equipment

  line vty 0 4
  password xxxxxx

  ***********************

  Your question

  What is the configuration of the router as a switch which seems to work correctly you're saying and I configured its doing its job, don't forget you said that you cannot route no between the router and the router switch should take care of this, whats the vlan ports on the router are on is - what the same subnet do they get an ip address in the same subnet off dhcp as devices of switching, if they do, and you cannot ping them to the same subnet theres something upward on the side of the router it would treat for layer 3 routing ip traffic

  the ping to the router devices connected to the cisco switch and can the device on the router cannot ping devices switches

  If you move a device out of the router and attach it to the doe sit switch still work ok, reach the talk of the internet to other devices on the switch?

  As there is a layer 2 switch you don't need this command you have your entry door you can remove it.. .IP default-network 192.168.0.0

• Cisco 5505, inside, I cannot ping the external IP of the router, but inside I can ping anything else

  Hello

  5505 Cisco's internal IP: 10.10.0.1 static, securty level 100

  External IP of Cisco 5505: 36.X.X.23 Dhcp, 0 security level

  of within peut all host external example ping by host 10.10.0.3 to google.com

  inside peut ping all domestic example of the host, host 10.10.0.3 to 10.10.0.5 included the internal IP of Cisco 10.10.0.1

  inside peut ping ip network address different on the same network from my router external example the host 36.x.x.25

  cannot ping inside the IP 36.X.X.23?

  from outside peuvent ping the IP 36.X.X.23

  outside peuvent ping different extenal network 36.X.X.X network ip

   
  How can I ping the 36.X.X.23 of the Interior, any suggestions?

  It's called background management which is not supported in the ASA

  https://Tools.Cisco.com/bugsearch/bug/CSCtd86651

  That's why is not and this will never work the ASA design does not

  It will be useful.

• ASA 5540 - cannot ping inside the interface

  Hi all. We have recently upgraded PIX to ASA5540 and we saw a strange thing going. In a Word, we can ping the inside interface of the ASA from any beach on our 6500 network (which is connected directly behind the ASA on the inside), but one where our monitoring tools are placed. Inside there is an ACL that allows all of our core networks, but it does not help that the interface is really strange.

  In the ASDM, I see messages like this:

  ID ICMP echo request: 2004 x.x.x.x y.y.y.y on the inside interface to. I don't think that's the problem, but I could be wrong.

  This is also the configuration of the interface VLAN VIRTUAL local area network from which we cannot ping inside the interface we can ping to and since this VLAN and machines without problem. The only problem is ping the inside interface of the ASA.

  interface Vlanx

  IP x.x.x.x 255.255.255.0

  IP broadcast directed to 199

  IP accounting output-packets

  IP pim sparse - dense mode

  route IP cache flow

  load-interval 30

  Has anyone experiences the problem like this before? Thanks in advance for any help.

  Can you post the output of the following on the ASA:-

  display the route

  And the output of your base layer diverter: -.

  show ip route<>

  HTH >

• Cisco ezvpn ASAs cannot ping each other inside interfaces

  I have a set ezvpn in place with a 5506 (position B) client-side and a 5520 (location A) server-side. I have successfully connected vpn, and traffic flows. My problem is that I can't SSH in the location b. investigate this more than I can not ping is within the interface of the ASA opposing, or the machines inside each ASA ASA.

  I found the following links that describes a scenario similar to mine, but nothing on one of them helped me.
  http://www.experts-exchange.com/questions/28388142/cannot-ping-ASA-5505-inside-interface-across-VPN.html
  https://www.fir3net.com/firewalls/Cisco/Cisco-ASA-proxy-ARP-gotcha.html
  https://supportforums.Cisco.com/discussion/11755586/Cisco-ASA-VPN-established-cant-ping

  I joined sanitized versions of these two configs. Any help is appreciated.

  Hi Adam

  The site of B I'm not able to see "management of access to inside. Please try to set up the same. He could solve the problem.

  Also on the instruction of the ASA takes place nat can you please try to add keywords 'search non-proxy-arp route'.

  something like:

  nat (inside,outside) source static (Location A)_Networks (Location A)_Networks destination static (location B)-remote_network (location B)-remote_network no-proxy-arp route-lookup

  as I have noted problems with inside access to interface via the VPN when those keywords are not applied. If I remember correctly 8.6.x ASA version had a bug regarding the same. Cordially Véronique

• cannot ping remote ip on ASA no firewall (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  some help me

  (Q) ping remote ip unable on ASA is not Firewall not on pc (VPN site to site on SAA) configired no proxy, icmp not inspect, no chance

  Note - I can ping PC but not the same subnet ip on ASA2 L3

  PC---> > ASA1 - ASA2<>

  Hi Matt,

  Let me answer your question in two points:

  • You cannot ping an ASA on another interface other than the one where you are connected to the ASA of.

  For example, ASA1 and ASA2 are connected through their interfaces 'outside '. ASA1 (or any other device on the external interface) can not ping/access ASA2 on his (ASA2) within the interface. The only time wherever this can be substituted is a tunnel VPN with the command "access management" configured for other interface, for example management-access inside

  • Traffic ASA1 ping to a remote client behind ASA2 won't over the VPN tunnel and as such is not encrypted. That's because ASA1 will forward traffic based on its routing table that probably this way through its 'outside' interface Except that traffic is allowed with the ASA2 (using the ACL), it will fail.

  We can do on the routers of sourcing our ping to another interface, but it will not work on the SAA.

• cannot ping between remote vpn site?

  vpn l2l site A, site B is extension vpn network, connect to the same vpn device 5510 to the central office and work well.  I can ping from central office for two remote sites, but I cannot ping between these two vpn sites?  Tried to debug icmp, I can see the icmp side did reach central office but then disappeared! do not send B next?  Help, please...

  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  !
  object-group network SITE-a.
  object-network 192.168.42.0 255.255.255.0
  !
  object-group network SITE-B
  object-network 192.168.46.0 255.255.255.0
  !
  extended OUTSIDE allowed a whole icmp access list
  HOLT-VPN-ACL extended access-list allow ip object-CBO-NET object group SITE-a.
  !
  destination SITE-a NAT (outside, outside) static source SITE - a static SITE to SITE-B-B
  !
  address for correspondence card crypto VPN-card 50 HOLT-VPN-ACL
  card crypto VPN-card 50 peers set *. *.56.250
  card crypto VPN-card 50 set transform-set AES-256-SHA ikev1
  VPN-card interface card crypto outside
  !
  internal strategy group to DISTANCE-NETEXTENSION
  Remote CONTROL-NETEXTENSION group policy attributes
  value of DNS server *. *. *. *
  VPN-idle-timeout no
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value REMOTE-NET2
  value by default-field *.org
  allow to NEM
  !
  remote access of type tunnel-group to DISTANCE-NETEXTENSION
  Global DISTANCE-NETEXTENSION-attributes tunnel-group
  authentication-server-group (inside) LOCAL
  Group Policy - by default-remote CONTROL-NETEXTENSION
  IPSec-attributes tunnel-group to DISTANCE-NETEXTENSION
  IKEv1 pre-shared-key *.
  tunnel-group *. *.56.250 type ipsec-l2l
  tunnel-group *. *.56.250 ipsec-attributes
  IKEv1 pre-shared-key *.
  !

  !

  ASA - 5510 # display route. include the 192.168.42
  S 192.168.42.0 255.255.255.0 [1/0] via *. *. 80.1, outside
  ASA - 5510 # display route. include the 192.168.46
  S 192.168.46.0 255.255.255.0 [1/0] via *. *. 80.1, outside
  ASA-5510.

  !
  Username: Laporte-don't Index: 10
  Assigned IP: 192.168.46.0 public IP address: *. *.65.201
  Protocol: IKEv1 IPsecOverNatT
  License: Another VPN
  Encryption: 3DES hash: SHA1
  TX Bytes: bytes 11667685 Rx: 1604235
  Group Policy: Group remote CONTROL-NETEXTENSION Tunnel: remote CONTROL-NETEXTENSION
  Opening time: 08:19:12 IS Thursday, February 12, 2015
  Duration: 6 h: 53 m: 29 s
  Inactivity: 0 h: 00 m: 00s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no
  !
  ASA - 5510 # display l2l vpn-sessiondb

  Session type: LAN-to-LAN

  Connection: *. *.56.250
  Index: 6 IP Addr: *. *.56.250
  Protocol: IPsec IKEv1
  Encryption: AES256 3DES hash: SHA1
  TX Bytes: bytes 2931026707 Rx: 256715895
  Connect time: 02:00:41 GMT Thursday, February 12, 2015
  Duration: 13: 00: 10:00

  Hi Rico,

  You need dynamic nat (for available IP addresses) for the two side to every subset of remote access to the other side remote subnet and so they can access every other subnet as if both from the traffic from your central location.

  example:

  Say, this IP (10.10.10.254) is unused IP to the central office, allowed to access remote tunnel 'A' and 'B' of the site.

  object-group network SITE-a.
  object-network 192.168.42.0 255.255.255.0
  !
  object-group network SITE-B
  object-network 192.168.46.0 255.255.255.0

  dynamic source destination SITE-a. 10.10.10.254 NAT (outdoors, outdoor)
  public static SITE SITE-B-B

  destination NAT (outdoors, outdoor) SITE-B 10.10.10.254 dynamic source
  SITE static-SITE a

  Hope this helps

  Thank you

  Rizwan James

• Cannot ping ASA remote on an L2L

  I have an ASA5520, and about 10 of 5505. Site running all at the Sites. The tunnels are in place and everything worked fine. Well on the side room, I cannot ping the ASA remote, but I can ping all devices behind it. On the remote side I ping the 5520 and everything else on my network I encouraged. When I look at the newspaper of the ASDM on the 5520, that there is no evidence related to the ping for the 5505. I don't see where it blocks the ICMP on the 5505. It just says:

  "6 August 14, 2008 05:40:49 302020 10.0.3.69 192.168.1.101 built outgoing ICMP connection for faddr gaddr laddr 192.168.1.101/0 192.168.1.101/0 10.0.3.69/512.

  and

  "6 August 14, 2008 05:40:49 302021 10.0.3.69 192.168.1.101 connection disassembly ICMP for faddr gaddr laddr 192.168.1.101/0 192.168.1.101/0 10.0.3.69/512.

  It is a normal traffic for a S2S I guess. While I am trying to get this to work I have it configured,.

  ICMP allow any inside

  "ICMP allow all outside.

  Any suggestions?

  If you try to ping inside the interface through the tunnel, try to add...

  management-access inside

• Cannot ping hosts on the same vlan on the 2 switches.

  Hey guys so I create my own network in Packet Tracer 6.3. While the hosts can ping others on the same switch 2960 and VLAN, they are unable to ping a host on another switch in the same VLAN. For example. Josh PC on S1 (192.168.10.10) cannot ping PC Doge on S2 (192.168.10.13). I'm sure that they are on the same subnet, so I thing it is a problem of junction...

  S1:

  S1 #show ip int br

  Interface IP-Address OK? Method State Protocol

  FastEthernet0/1 unassigned YES manual up up

  FastEthernet0/2 unassigned YES manual up up

  FastEthernet0/3 unassigned YES manual up up

  FastEthernet0/4 unassigned YES manual up up

  FastEthernet0/5 unassigned YES manual administratively down down

  FastEthernet0/6 unassigned YES manual administratively down down

  FastEthernet0/7 unassigned YES manual administratively down down

  FastEthernet0/8 unassigned YES manual administratively down down

  FastEthernet0/9 unassigned YES manual administratively down down

  FastEthernet0/10 unassigned YES manual administratively down down

  FastEthernet0/11 unassigned YES manual administratively down down

  FastEthernet0/12 unassigned YES manual administratively down down

  FastEthernet0/13 unassigned YES manual administratively down down

  FastEthernet0/14 unassigned YES manual administratively down down

  FastEthernet0/15 unassigned YES manual administratively down down

  FastEthernet0/16 unassigned YES manual administratively down down

  FastEthernet0/17 unassigned YES manual administratively down down

  FastEthernet0/18 unassigned YES manual administratively down down

  FastEthernet0/19 unassigned YES manual administratively down down

  FastEthernet0/20 unassigned YES manual administratively down down

  FastEthernet0/21 unassigned YES manual administratively down down

  FastEthernet0/22 unassigned YES manual administratively down down

  FastEthernet0/23 unassigned YES manual administratively down down

  FastEthernet0/24 unassigned YES manual administratively down down

  GigabitEthernet0/1 unassigned YES manual down down

  GigabitEthernet0/2 unassigned YES manual down down

  Vlan1 unassigned YES manual administratively down down

  Vlan2 unassigned YES manual downwards upwards

  Vlan10 unassigned YES manual up up

  S1 #show interface f0/1 switchport

  Name: Fa0/1

  Switchport: enabled

  Administrative mode: trunk

  Operational mode: trunk

  Encapsulation of administrative circuits: dot1q

  Operational Trunking encapsulation: dot1q

  Trunking negotiation: Off

  The VIRTUAL LAN access mode: (default) 1

  Native mode VLAN Trunking: 2 (native)

  The voice of VLAN: no

  Private-vlan host association Directors: no

  Mapping of private - vlan management: no

  Private-vlan trunk administration VLAN native: no

  Private - vlan administration trunk encapsulation: dot1q

  Private-vlan trunk administration VLAN normal: no

  Private-vlan trunk administration private VLAN: no

  Private-vlan operational: no

  VLAN Trunking enabled: ALL

  Pruning VLANS enabled: 2-1001

  Capture Mode disabled

  Capture VLAN allowed: ALL

  Protected: false

  The unit trust: no

  S1 #show vlan br

  Ports of status for the name of VLAN

  ---- -------------------------------- --------- -------------------------------

  1 by default active Fa0/5, Fa0/6, Fa0/7, Fa0/8

  Fa0/9, Fa0/10, Fa0/11, Fa0/12

  FA0/13, Fa0/14, Fa0/15, Fa0/16

  FA0/17, Fa0/18, Fa0/19, Fa0/20

  FA0/21, Fa0/22, Fa0/23 and Fa0/24

  Gig0/1, Gig0/2

  2 active native

  5 active

  10 active VLAN0010 Fa0/2, Fa0/3, Fa0/4

  active by default fddi 1002

  assets of token-ring-default 1003

  1004 fddinet - default active

  1005 trnet - default active

  Trunk interface #show S1

  VLAN Mode Encapsulation native port State

  FA0/1 on 802. 1 trunking q 2

  Port VLAN allowed on trunk

  5,10,20 FA0/1

  Port VLAN authorized and active in the field of management

  FA0/1 5,10

  VLAN port extending on transmission State and no tree pruned

  FA0/1 5,10

  S1 #show mac-address-table

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  ---- ----------- -------- -----

  5 00d0.d37a.ed01 DYNAMICS Fa0/1

  S2:

  S2 #show ip int br

  Interface IP-Address OK? Method State Protocol

  FastEthernet0/1 unassigned YES manual up up

  FastEthernet0/2 unassigned YES manual up up

  FastEthernet0/3 unassigned YES manual up up

  FastEthernet0/4 unassigned YES manual up up

  FastEthernet0/5 unassigned YES manual administratively down down

  FastEthernet0/6 unassigned YES manual administratively down down

  FastEthernet0/7 unassigned YES manual administratively down down

  FastEthernet0/8 unassigned YES manual administratively down down

  FastEthernet0/9 unassigned YES manual administratively down down

  FastEthernet0/10 unassigned YES manual administratively down down

  FastEthernet0/11 unassigned YES manual administratively down down

  FastEthernet0/12 unassigned YES manual administratively down down

  FastEthernet0/13 unassigned YES manual administratively down down

  FastEthernet0/14 unassigned YES manual administratively down down

  FastEthernet0/15 unassigned YES manual administratively down down

  FastEthernet0/16 unassigned YES manual administratively down down

  FastEthernet0/17 unassigned YES manual administratively down down

  FastEthernet0/18 unassigned YES manual administratively down down

  FastEthernet0/19 unassigned YES manual administratively down down

  FastEthernet0/20 unassigned YES manual administratively down down

  FastEthernet0/21 unassigned YES manual administratively down down

  FastEthernet0/22 unassigned YES manual administratively down down

  FastEthernet0/23 unassigned YES manual administratively down down

  FastEthernet0/24 unassigned YES manual administratively down down

  GigabitEthernet0/1 unassigned YES manual down down

  GigabitEthernet0/2 unassigned YES manual down down

  Vlan1 unassigned YES manual administratively down down

  Vlan2 unassigned YES manual downwards upwards

  Vlan5 unassigned YES manual up up

  Vlan10 unassigned YES manual up up

  Vlan20 unassigned YES manual up up

  Vlan99 unassigned YES manual administratively down down

  S2 #show interface f0/1 switchport

  Name: Fa0/1

  Switchport: enabled

  Administrative mode: trunk

  Operational mode: trunk

  Encapsulation of administrative circuits: dot1q

  Operational Trunking encapsulation: dot1q

  Trunking negotiation: on

  The VIRTUAL LAN access mode: (default) 1

  Native mode VLAN Trunking: 2 (native)

  The voice of VLAN: no

  Private-vlan host association Directors: no

  Mapping of private - vlan management: no

  Private-vlan trunk administration VLAN native: no

  Private - vlan administration trunk encapsulation: dot1q

  Private-vlan trunk administration VLAN normal: no

  Private-vlan trunk administration private VLAN: no

  Private-vlan operational: no

  VLAN Trunking enabled: ALL

  Pruning VLANS enabled: 2-1001

  Capture Mode disabled

  Capture VLAN allowed: ALL

  Protected: false

  The unit trust: no

  S2 #show vlan br

  Ports of status for the name of VLAN

  ---- -------------------------------- --------- -------------------------------

  1 by default active Fa0/5, Fa0/6, Fa0/7, Fa0/8

  Fa0/9, Fa0/10, Fa0/11, Fa0/12

  FA0/13, Fa0/14, Fa0/15, Fa0/16

  FA0/17, Fa0/18, Fa0/19, Fa0/20

  FA0/21, Fa0/22, Fa0/23 and Fa0/24

  Gig0/1, Gig0/2

  2 active native

  5 active

  10 VLAN0010 active Fa0/4

  20 VLAN0020 active Fa0/2, Fa0/3

  active by default fddi 1002

  assets of token-ring-default 1003

  1004 fddinet - default active

  1005 trnet - default active

  S2 #show mac-address-table

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  ---- ----------- -------- -----

  2 0030.f2c1.94e5 STATIC Fa0/1

  2 0060.5c83.3401 STATIC Fa0/1

  10 0002.4ae9.6964 STATIC Fa0/4

  10 0060.5c83.3401 STATIC Fa0/1

  20 0009.7c9a.a134 STATIC Fa0/2

  ----------------------------------------------------------------------------------

  Let me know what I missed here. All connections are made with a straight through cable.

  See you soon

  Josh

  Try to remove the S2 switchport port-security:

  interface FastEthernet0/1
   no switchport port-security

• Site to Site VPN - cannot ping remote subnet

  Hi all.

  I have a site to site VPN IPSEC between a 5510 (HQ) and 5505 (Remote). Everything works on the tunnel. Crypto cards and ACL is symmetrical. I see that the tunnel is in place for the required subnets. However, I can not ping of internal subnets inside 5510 to Remote LAN inside 5505 and vice versa. I have other rays VPN 5510 where I can ping within remote LAN successfully x.x.x.x. Can figure out what I'm missing. I can ping internet points, but cannot ping HQ.

  Any suggestions?

  I'm also an instant learn the ASAs, so I'm not an expert.  I know that I encouraged outside ICMP. My statement SHEEP and crypto are running off of the same group of objects that lists subnets of HQ.

  Thanks in advance.

  5505 lack the command:

  management-access inside

  Federico.

• Customer remote VPN cannot ping certain IP

  My Cisco VPN client can establish the tunnel with my successful ASA5505 Office vpn but cannot ping some IP such as an internal server (10.100.194.6).

  FIREWALL-1 # ping 10.100.194.6
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.100.194.6, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

  Why I can't ping certain IP?

  Help, please.

  Thank you.

  Hey Kevin,

  Check out the capture, it is obvious that there is a problem of internal routing as we can see packets from the VPN client requests, but there is no response from the server package.

  Please ensure that the server has pointing on the Firewall VPN subnet route.
  HTH.

  Kind regards

  Dinesh Moudgil

  PS: Please check the useful messages.