Cannot print from the server to the client printer.

Similar Questions

• LabVIEW TCP/IP Client and server, I need to send commands and receive comments side server from the client regarding the command sent.

  Hi all

  I can configure my two PCs, one as a client and a server very well. I am able to send commands from the server to the client. However, I am trying to determine how I can get feedback from the client to the server that something has changed, or a CQI that the command has been received. How I can do this in LabVIEW with the box to TCP/IP tools, or is there a better way to do it?

  Thanks for your help!

  Best regards

  -Gmac

  Once the connection is established, TCP does not care which end is the 'server' and the 'customer '. Data can be sent in both directions using the same read and write functions. So, if you are already able to send data to the client and read on the server, you should be able to do the same to send data from the server to the client, using the same TCP connection.

  If this is not clear, please your postal code so that we can provide more specific advice.

• Is it possible to download a file from the client flex on the server?

  In my plugin I would ask the user to provide me with a local of files I need to upload to the server (server blank when my Java code is running). Since flex is launched in the sandbox inside the browser, they provide an API for downloading files the from/to the URL of the server built-in. Is it possible to define my own servlet (or something like that) inside the Virgo vSphere server to listen for the event upload? Y at - it another possibility to upload a file from the client flex on the server?

  Thank you

  Valeria

  Yes it is possible, but it is not recommended to download the large amount of data to the client Web server.  Don't forget that your java plugin is just a transmission in your own background when real business logic and/or data sources are provided.  You might as well send the file directly to your back-end, there is no reason to keep it on the server of the Web client.

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• How to copy a file from the client to the DB using WebUtil machine.

  We convert our forms 10g R1 forms 11g (Forms [64-Bit] Version 11.1.2.0.0).
  
  Or 10g R1 forms that we use a bean called oracle.forms.demos.uploadclient.FileUploader to download files from our machines of client DB machine and sometimes the application server. Select the file (using the open dialog box file which is also part of FileUploader) and then give the directory of destination (from DB machine) using the IP address.
  
  Problem is this bean File Upload does not work in forms 11g. So we need to use WebUtil.
  
  Problem is, WebUtil has only a utility to copy the files to the client computer on machine App Server (Client_To_AS). Documentation, says 'download target directory.
  must be in the transfer.appsrv.write list. Can we put any directory beginning with an IP address in the present name and use this Client_to_AS function to copy files from client to DB machine?
  
  Or if not how transfer us files from the client computer to any machine in the network form 11 g?
  
  Published by: user12240205 on June 8, 2012 03:58

  Probably, if the upload form, it is important that a "commit" be properly executed. It was actually a problem we have seen with the demo of original webutil too, which has now been fixed. We were not making a commit and so, data were only available in the session as a result of the post, but not available outside the current session of forms.

• How to remove the file from the client machine

  Hi all
  We use the database: oracle: 10 g,.
  and forms/States 10g (developer suite 10g - 10.1.2.2).
  
  can someone help me how to remove the file from the client computer in the location specified using webutil or everything
  (I tried with webutil_host & client_host but this only works for the application server)
  Thank you.

  Hello

  Checkbox not tested.

  PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
  IS
  
  --------------------------------------------------------------------------------
  -- Open a stored document --
  
  --------------------------------------------------------------------------------
  LC$Cmd Varchar2(1280) ;
  LC$Nom Varchar2(1000) ;
  LC$Fic Varchar2(1280);
  LC$Path Varchar2(1280);
  LC$Sep Varchar2(1) ;
  LN$But Pls_Integer ;
  LB$Ok Boolean ;
  -- Current Process ID --
  ret WEBUTIL_HOST.PROCESS_ID ;
  V_FICHERO VARCHAR2(500);
  COMILLA VARCHAR2(4) := '''';
  BOTON NUMBER;
  MODO VARCHAR2(50);
  URL VARCHAR2(500);
  
  Begin
  
  V_FICHERO := V_ID_DOC;
  
  LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
  LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
  --LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
  LC$Path := 'C:';
  LC$Fic := LC$Path || LC$Sep || LC$Nom ;
  
  If Not webutil_file_transfer.DB_To_Client
  (
  LC$Fic,
  'TABLE_NAME',
  'ITEM_NAME',
  'WHERE'
  ) Then
  
  Raise Form_trigger_Failure ;
  
  End if ;
  
  LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
  Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
  LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
  If LN$But 0 Then
  Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
  Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
  LN$But := Show_Alert( 'ALER_STOP_1' ) ;
  LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
  Raise Form_Trigger_Failure ;
  End if ;
  
  If Not webutil_file_transfer.Client_To_DB
  (
  LC$Fic,
  'TABLE_NAME',
  'ITEM_NAME',
  'WHERE'
  ) Then
  NULL;
  Else
  Commit ;
  End if ;
  LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
  
  Exception
  When Form_Trigger_Failure Then
  Raise ;
  End ;
  

  Sarah

• How to create a rep duration of Reports10G file and run from the client side

  How can I do rep Reports10G file and can be run from the client side like report 6, 6i. I'd appreciate your quick response.
  
  Thank you

  If I remember correctly, the .rep files are 6i and earlier versions. 9i and later versions do not generate .rep.
  the 10g is no longer a client server model, is a model of web

  typical system:

  you have a server for your database
  you have a server for your application server (was RDF & .fmb (.fmx) files resident) is also your intranet.
  you have a customer

  the client uses a browser such as Firefox or IE to browse the intranet site. Oracle application server is your forms & reports a java plugin.

  hope this helps

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to send data from the client to the server using tcp

  1. as I am new to watch I need help with sending data from client to server. I went through various examples of labview, but each of them also explains transfer of data to the client server. But I need help regardng send data from the server to the client.

  2.i would use the data type variant for sending my data.

  Can someone help me please. Thank you

  Regardless of the meaning. Once you have a connection each end allows it to send data to another. Just create what you want to look like interaction.

  Do you want the client sends a command that request data?
  How do you think the response data to look like?

  You can send variants, but probably not worth the effort.

  Mike...

• How FTP a file from the client computer to the server database using Forms 10 g

  Hello
  I want a file from a client computer to the database server computer using Forms 10 G (or PL/SQL) via ftp.
  could you please tell me how can I do this
  
  Concerning

  Hello

  I gave u the adequate instructions on webutil configuration but u did not comply with it.
  I will post again please read correctly and follow it.

  How to get running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
  Solution
  Assuming a new 'Complete' installation of Oracle Developer Suite 10.1.2.0.2,
  Here are the steps to get a shape of small test running, using WebUtil 1.06.

  Note: Oracle_Home is used as an alias for your real oDS ORACLE_HOME.
  Feel free to copy this note to a text editor and do a find/replace on
  Oracle_Home with your real value (no slash). Then, it is easy to
  copy and paste the actual orders to be run from the copy of the memo.

  (* 1) * download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
  and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.

  (* 2) * copy or move jacob.jar and jacob.dll
  C:\webutile is the folder where you extracted Jacob and ends in ...\jacob_18
  CD C:\webutile
  Copy jacob.jar Oracle_Home\forms\java\.
  Copy jacob.dll Oracle_Home\forms\webutil\.
  Staging of Jacob is no longer needed and can be deleted.

  (* 3) * sign frmwebutil.jar and jacob.jar
  Open a DOS command prompt.
  Add Oracle_Home\jdk\bin in the path:
  set PATH=Oracle_Home\jdk\bin;%PATH%
  Sign files and check the result of success:
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\frmwebutil.jar
  Oracle_Home\forms\webutil\sign_webutil Oracle_Home\forms\java\jacob.jar

  (* 4) * If you already have a pattern in your RDBMS that contains stored WebUtil code,.
  You can skip this step. Otherwise,.
  Create a schema for the stored code WebUtil and privileges to
  Sign in and create a stored package. Name of the schema "WEBUTIL" is recommended
  for no reason other than consistency based on users.
  Open Oracle_Home\forms\create_webutil_db.sql in a text editor and remove or comment
  the declaration of EXIT, in order to see if the objects have been created witout
  errors.
  Launch SQL * more like SYSTEM and the issue:
  Webutil IDENTIFIED BY password CREATE a USER
  DEFAULT TABLESPACE users
  TEMPORARY TABLESPACE temp;
  /
  GRANT CONNECT, CREATE PROCEDURE, CREATE SYNONYM TO webutil PUBLIC;
  /

  CONNECT webutil/webutil@rcci
  @Oracle_Home\forms\create_webutil_db.sql
  -Inspect SQL * Plus output for errors, and then
  CREATE a PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
  /

  Reconnect as SYSTEM and the question:
  Grant execute on webutil_db to public;

  /

  (* 5) * Edit Oracle_Home\forms\server\default.env and add Oracle_Home\jdk\jre\lib\rt.jar
  to the CLASSPATH entry.

  (* 6) * add edit Oracle_Home\forms\server\formsweb.cfg default insde:
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar
  Archive = frmall.jar
  also add:
  webutil
  WebUtilLogging = off
  WebUtilLoggingDetail = normal
  WebUtilErrorMode = alert
  WebUtilDispatchMonitorInterval = 5
  WebUtilTrustInternal = true
  WebUtilMaxTransferSize = 16384
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  baseHTML = webutilbase.htm
  archive_jini = frmall_jinit.jar
  WebUtilArchive = frmwebutil.jar, jacob.jar, f90all.jar
  Archive = frmwebutil.jar, f90all.jar
  lookAndFeel = oracle

  (* 7) * Oracle_Home\forms\server\webutil.cfg edit and add:
  Transfer.Database.Enabled = True
  Transfer.appsrv.Enabled = True

  (* 8) * start the OC4J instance

  (* 9) * start Forms Builder and connect to a schema in the RDBMS used in step (4).
  Webutil.PLL open, make a 'compile ALL' (shift-control-K) and generate PLX (Ctrl-T).
  It is important to generate the PLX, in order to avoid the FRM-40039 indicated in Note 303682.1
  If the PLX is not generated, the library Webutil.pll must be fixed with
  path information full access to all who wish to make use of WebUtil. This is NOT recommended.

  (* 10) * create a new WBF.
  Open Webutil.olb and subclass (not copy) the Webutil opposes the shape.
  There is no need to subclass the WebutilConfig object.
  Attach the Webutil.pll library and remove the path.
  Add a logon trigger IT with code
  NULL;
  to avoid having to connect to a RDBMS (optional).
  Create a new button on a new canvas, with the code
  show_webutil_information (TRUE);
  in a trigger WHEN BUTTON PRESSED.
  Compile the FMB to FMX, after doing a compilation-All (shift-control-K).

  (* 11) * under Edit-> preferences-> Runtime in the form designer, click the "Reset to Default" If
  the "Application Server URL" is empty.
  Then add '? config = webutil' at the end, if you end up with a URL of the form
  : http://application-tier server: port/forms/frmservlet? config = webutil

  (* 12) * run your form

  Note: If you want to use Jacob and you can configure jacob too, if you follow the above mentioned instructions.
  Sarah

• Print to local printer from the client computer

  Hi Dan
  Please help the following problem:
  How to send a print to the local printer of the client machine (or end-user) have activate additional services?
  The project is deployed on a server Linux with Oracle Enterprise BPM and Oracle WebLogic 10.3.
  Thanks for the help

  Hello

  If you want to print the presentation of the subject of a BPM, you can add a new button to the presentation with the label "Print". 'The Action' property for the button should just be changed to 'print '.

  You can choose a couple to print a PDF file. Easiest would be to add a link in your PDF presentation (assuming that the PDF would be on the server somewhere). Once they click on the link, the PDF file would come to the top and they could print the pup.

  Hope this helps,
  Dan

• Deskjet F340 all-in-one printer cannot scan from the solution Center

  We had a very short temporary blackout in mid-August. Who put my turn out of service until I could afford a new

  power cord. I received the new cord and my PC works fine now. I had to replace my modem because it is finally just

  stop working. My printer doesn't not have be reinstalled because I lost some functions when we had the black out.

  Now I can only print and copy from the Solution Center. There is no indication in the scanning settings. I can scan if I go to

  Scanners and cameras and use Scanner and camera wizard. But it can be a pain. I also can't any alignment

  messages after I replaced a printer cartridge. I get the alignment page but no message. It does not seem to line up OK. My

  OS is WIN XP Home Ed with SP2. It's on a Everex IMPACT GA3400 PC. My printer uses a USB connection. I think that

  some of the files I need for scanning to go from the Center of solutions some how have been removed. But I don't know which ones or

  even how to get back them. Any help would be greatly appreciated.

  Pleae insert the printer installation CD and contant go through it:

  Locate Setup\SolutionCenter\SolutionCenter.msi, right click on the file and click on repair.

  Confirm an alert during the installation.

  Search now Setup\Scan\Scan.msi, right-click, and then click on repair... to confirm an alert as before.

  Restart your PC and launch the HP Solution Center now.

  You don't see any change?

• OfficeJet 5740: Cannot fax from the computer

  My new Officejet 5740, purchased on 11/15/14, worked fine until February 2015 - no problem with any of its functions, including faxes.

  That was all the time I went from a wireless connection to a USB connection and since then out of faxes cannot be sent from the computer, even if they can be sent from the printer by using the LED screen. There is no problem with the incoming faxes.

  Sending the printer with the LED screen is a nuisance of errors compared to the convenience of use of the computer. Lengthy discussions with HP Technical Support have been of any help. The technicians seem to think I should just give up and use the LED screen on the printer.

  After trying in vain to send an outgoing fax using the computer, the Fax status window appears saying "queue... "as the status of the fax, and it never goes one further.

  Is it possible that my passage in wireless USB connection type caused the problem? Maybe I need a different driver? If Yes, where can I download one, and what should I go for? Thank you.

  Hello @Harry46,

  Welcome to the Forums of HP Support! I see that you are not able to send a fax from your HP Officejet 5740 computer, you can send a fax from the front panel.

  I think you just need to update the drivers and software, please proceed with the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software JO 5740 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software JO 5740 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your JO 5740 (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-134701-2&cc=us&DLC=en&LC=en&OS=4063&productOid=6617254&sw_lang=&product=6617256

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if this succeeds, can now send you a fax from the computer? I'll watch for your reply.

  Thank you

• Qosmio G35: Cannot boot from the recovery disc

  I'm in trouble from the screen of my Qosmio G35 showing lines vertical, gel, then a loop on and outside.

  I used the Toshiba factory restore disc to reformat and the problem remains, I went further and chose the maquis of the HARD drive option. Bad choices made by this beginner, because now it does not recognize the drive at all, prompting me to "initialize".

  Lines remain, but it is not the material of the screen happens during some process that I follow, OK.

  A friend more computer over the phone prompted me to go into the BIOS, but we cannot access them. Research on the web, I tried the F12 suggested, but this does not work, just push me through in a screen offering 'Safe Mode' etc.

  Any help would be welcome. Thank you

  Hello

  Usually the vertical display lines looks like a hardware problem, in my view, it could be related to GPU failure.

  In any case, we should start first of all the problem of CD/DVD drive you must check if the disc is properly recognized in the BIOS.

  For this, it must Access the BIOS press the ESC (if Toshiba BIOS) or the key F2 (if Phoenix BIOS). Please check these two options because I m not 100% sure what the BIOS the Qosmio G35 uses.

  But like I said earlier the issue looks like a malfunction of the graphics card and you must contact the ASP in your country for assistance.

  Best regards & friend good luck

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.