Cannot print using canon print pro

Similar Questions

• Cannot print 13 X 19 on Canon Pixma Pro 100 - 10.9.5 - Photoshop CS6

  MAC OS X: 10.9.5 (Mavericks)

  Photoshop CS6 Extended

  Hello

  Lost about two hours trying to figure how to print 13 X 19 from Photoshop CS6. After noticing that the option A3 + not appearing is not on cheking the prinnt options, I've read that I should use the Print Studio Pro plugin. When I try to use the plugin pro printing studio I get this error:

  "a printer supported by this software is not found. Connect the printer supported by this software, and then install its driver. Pro printing Studio output. »

  Ridicule of Wat is I use the printer and it works for all kinds of impressions, so it IS installed. What am I supposed to do? I have a huge batch of paper 13 X 19 Canon semi-Gloss Photo that I can't use.

  to my knowledge, I have all the drivers installed. Any help would be grateful. Thank you in advance.

  -GIo

  Two suggestions:

  Download and install the latest version of Print Studio Pro.

  If you use the WiFi printer make sure that you have added the IJ network printer and not the printer Hello.

• HP Offijet Pro 8610: hp OfficeJet 8610 cannot print using Standard user

  Dear support,

  I have new HP Officejet Pro 8610 (series [personal information deleted]
  ), connect through a cable as follows: printer---> Switch---> Laptop1, Laptop2, etc.
  All laptops and PCs using Windows 7 Pro x 64 and I have installed the printer driver by using the original installation of the driver CD. The issue is that user with administrator privileges can print bau standard user cannot.
  I already tried the scann doctor:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/...

  but no luck. Scan Doctor it can print the test page,

  but when I tried to Printe test page:

  

  tried to print from outlook:

  

  I tried uninstalling the driver and reinstalling using two administrators or standard users do not have the chance.

  Help, please.

  Hi @hehe001,

  Thanks for joining the HP Forums, I see that you have worked with the great Bob_Headrick. I know that Bob knows his stuff, so I don't know if my contribution will be useful but that's nothin' '.

  At first I thought maybe it was the program, but after some research, I feel, the question may be the driver himself. Please try to use the 8600 as another pilot.

  How to assign other print in different Versions of Windows drivers.

  The link above will guide you through the steps to assign a different print driver, I ask that you choose the 8600 if available, and if not, you can install the base driver 8600 here;

  OJ8600_Basicx64_1315.exe - for 64-bit operating systems

  OJ8600_Basicx86_1315.exe - for 32-bit operating systems

  Is my version of 32-bit Windows or 64-bit?

  Please don't forget to let me know if that fixes the problem or not. Thank you.

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• After the upgrade to el capitan, cannot print Canon mp970

  Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

  Any suggestions on what to try next?

  Hi Dellis46

  I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

  Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

  Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

  Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

  If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

  Now everything should work.

  It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

  If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

  I'd be more than grateful to the person who in fact occur...

  See you soon!

  Tjerri

• OfficeJet Pro 6835: Cannot print in black

  On printer 6835, no cartridegs are empty, but cannot print in black.

  Hi @Bill113,

  Welcome to the Forums of HP Support!
   
  I see that you are having print quality problems with your printer HP Officejet Pro 6835. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  I understand the frustration you feel. Looks like the black ink cartridge is dirty, faulty or printhead is clogged.

  Please follow the steps in this guide:

  • Color or black cartridge isn't printing
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  If you have completed all the above steps and your product still has a problem, service the product.
  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• Help the printing of the Canon Pixma Pro 100 size problem.

  Hi all! Quick question - can I print on a map of 3 x 4 with rear feeder of the Canon Pixma Pro 100? The guide used even close than smaller ones. Well, there must be a way... right? Thanks for any help!

  Display multiple and trim.

• Canon Pixma Pro - 100 prints very dark

  I see that it is a recuring with the Canon Pixma Pro-100 problem, but nothing, I found an online help I ask and hope someone can solve this problem for me.

  Just picked up a Pixma Pro-100 today and installed on my iMac 27 "(Yosemite) 2011 with the latest drivers downloaded from Canon to be sure to have the website." I also checked the printer firmware but it's later to 1,100. Weather, I'm printing through Lightroom or Photoshop; by Canon Print Studio Pro, my garden image, or by LR / PS directly; with - or without PS as a manager of color; the prints is proving to be much to dark.

  I have to set an exposure of 2/3 in LR to be anywhere nearby to get the same result as on the screen. I am also careful to select the right ICC for correct paper profiles. My monitor is calibrated with a Spyder4pro and I also re-calibrated her during this process to see if that helped.

  Well. Long story short; the prints are dark. So I borrowed 2013 Spyder4pro MacBook Pro (Yosemite my wife) and installed the latest drivers from Canon. Once again; on this machine, the impressions are also to dark with about + 2/3 in order to correct the impression of something that looks like the monitor. The two screens can also be programmed to 30% brightness.

  I also have access to an Epson Stylus Photo R3000 and the prints of that much brighter spell.

  Unfortunately, I see that many others also have the same problem. Then; Here's the question. How can I fix it? Do I have to return the printer and get a refund? Because it's clearly not good enough.

  Thank you very much for your answers. But unfortunately, I have "been there, done that" on all of your advice.

  I go back on Monday to the printer and replace it with an equal Epson printer as I have only good experiences with this brand and the prints I get without using overtime to tinker with settings.

  It was my first (and last) Canon printer.

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• The Adobe photoshop on my Canon pixma pro 100 menu wrinkles printer menu

  At one point I was printing my printer Canon pixma pro 100 and I feel

  It is menu and I checked black and white so I could print the black and white photos.

  Now when I try to print the color I can't access the menu of the Canon printer driver for change

  my Adobe menu and gives me this option.  So my impressions are all the

  coming in black and white.

  \

  I need to know how to replace this menu of Canon or get it on get Adobe

  Photoshop print menu.

  I removed my computer, the printer and the driver and restored, but not

  chance.

  Help.

  Which Version of photoshop and the operating system are you using?

  In the latest versions of photoshop, button print settings ther under setting up printing at the top of the print dialog box should show the printer settings.

  Can you post a screenshot of your print in photoshop dialog box?

• Printing from Lightroom 5.2 on Canon Pixma Pro-1

  Hello

  I am new to Lightroom 5 and Canon Pro-1. I'm not sure that I fully understand what is happening when I use ICC profiles for printing (in spite of paying through forum after forum). When I print the results look, nothing like the results on the screen. I tried the soft test and proof image looks like my output, but I'm not understand how I'm supposed to use the ICC profile.

  System

  Windows 7

  5.2 Lightroom

  Canon Pixma Pro-1

  8 GB RAM

  1. use of proofing it appears that I need to adjust my image for each paper type. It is not meant for me - I thought that the profile would be to adjust printing so that I wouldn't have to adjust the image.

  2. when I print, I put the following settings of the printer:

  

  3. when using unsupported paper, what types of paper should I choose? Is there a resource anywhere that tells me?

  

  4. should I have my correct print settings Lightroom base?

  

  Is could someone please tell me what I understood/hard to please? I know it's a forum for beginners but still, please, excuse for the total lack of understanding.

  Help is greatly appreciated.

  Thank you

  Mike

  I use the Pro-100 for a few months.  It's a great printer that I am very satisfied.  Currently there is a very aggressive rebate program if someone wants a new printer.  FWIW, I have been unable to find anyone, anywhere not happy with Canon Pro printers.  Basically, you can get a value of $170 of paper and ink for $99 with a printer that is 'free' to the end of the year.

  Return to this topic!

  There are potentially three completely different workflows between Lightroom and Canon Pro-life 1, 10, 100 series that involve choices of papers, ICC profiles and color management.

  1. printing with Lightroom controlling color.  You must open the printer driver and disable the printer color management.  By selecting the document in the pilot seems to define the profile.

  2. print with the printer manage the colors.  In LR, he must choose color management > managed by the printer.  Then turn on color management in the printer via the driver.

  3. printing with Canon provided in Cap.  After you have installed the plug of the supplied disc, in LR, go to file > Options of the plug-in > Canon Print Studio Pro.

  Like Lightroom fan, addict and supporter of everything that said J Kost, I was using #1 and love for landscapes.  I had to work a bit to find a way to turn off the printer as well as examples of J Kost for Epson.  Then I tried to print a picture of my granddaughter and her cheeks kept getting a little purple.  When I checked the Preview button before printing in the printer driver, I could see the change in color of the preview of LR.

  I went to #2 where the printer takes the decisions.  Extracts matched and stopped the cheeks blush.

  Then, I looked at a video conference conducted by a specialist of Canon products on the Web B & H Photo site in an hour.  It's the Canon plug-in demo.  I am strongly considering using that in the future.  I hope that Kost J will not be upset with me!  It seems that the Canon plug-in really has better control of quality on the printing process.

  A particularly interesting feature of the plug-in is a test sheet that looks like a sheet of evidence.  There are a bunch of thumbnails printed on a single sheet with a different color casts and numbers of adjustment under them.  Once you choose one that is 'just', you can save the setting as a "Preset" for that paper.

  Note that in the long video, Canon representative insisted on the support of 3 papers of party in the plug-in.

  Too long video was worth the investment of time.  I understand my printer and more watching him.  The link: http://www.bhphotovideo.com/indepth/photography/tips-solutions/canon-pixma-professional-in kjet-printers-exactly-you-considered

  Bill

• How can I poster print using my officejet pro 8600plus? My 8500 had this feature.

  How can I poster print using my officejet pro 8600plus? My 8500 had this feature.

  Yes, the Officejet 8500 driver works at full capacity on the Officejet 8600.

  You do not remove port 8600, you just right-click on the Officejet 8600, select properties from the Printer Ports and simply find what port the 8600 uses.  After writing this down, click Cancel to quit this game.  I suggest that you let the Officejet 8600 driver installed, you can install the version with the Officejet 8500 driver and simply select the printer you want to print time.

  

• Turns off spool under System App itself. Cannot print. Using Windows XP. Help, please.

  Spool under app system turns off.  Printers are gone from equipment.  Cannot print.   Is there a way this can be fixed remotely?  Help, please.

  Thanks,-Jane

  Hello

  1. If it works well before?

  2. don't you make changes to the computer until the problem occurred?

  3. could you give us the exact error message?

  I suggest you to try the steps below and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close":http://support.microsoft.com/kb/810894

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  For your reference: If the problem persists, please try the steps from the link below.

  Printer in Windows problems:http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Hope this information is useful.

• HP Officejet Pro 8610e: cannot print documents I scanned and saved as pdf files

  All of a sudden I cannot print I scanned and saved as pdf files.  I get a message indicating that the printer is "Impossible to convert the PostScript file.  Don't know how to handle, but I have to be able to print the docs I'm scanning and saving in pdf format.  Can someone help me?

  Thank you

  GTR

  Hi @GTR3,

  Welcome to the Forum from HP Support.

  I see that you are unable to print the PDF scanned documents with your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.

  You are able to print any other format PDF on the Mac, or the question is just limited to your scanned PDF files? Whether the soft friendly PDF work with - Adobe Reader or Foxit Reader?

  In the meantime, I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Cannot print from Macbook (ios 10.8) on HP Officejet Pro 8600 on ethernet. Except the test page.

  Hello

  I have change my old HP Photosmart (C6xx) printer to a new 8600 Pro of Offichejet.

  Deleted my old printer to my setup and rebbot.

  Download the latest drivers HP for IOS 10.8 years begin the installation.

  The installation went well.

  I can view and manage all my settings of the printer (fixed IP IP, inks,..) - wired Ethernet.
  I also print a frm 'test page' menu of the administrator.

  But cannot print any document othet. No word, no jpeg...

  The scanner also works well.

  If I try to print a simple document, the HP Officejet is selected, the document is 'send'... but nothing.

  In the 'add printer', the yello small icon in the making with a simple message like "ipp job id missing.

  Have you any idea of what does not work

  Danks,

  Bernard VH

  It works!

  (1) put the printer firmware level (I installed the CLP1N1304AR.)

  (2) uninstall the printer on the Macbook

  (3) Re-install the printer (don't no choice Airprint)

  that's all.

  Problem was the firmware.

  Thanks for your help

  Bernard