Cannot quit finder since upgrade to 10.11.5

Similar Questions

• Cannot open iPhoto since upgrading to OS X El Capitan, I can't find an update that works >?

  I recently updated my computer to OS X El Capitan, I cannot now open or access my iPhoto, or I can't find compatible update.  What should I do?  I just lost access to all my photos?

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto and can import library. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  (142770)

• Restart fails. Error message: The Finder cannot quit because some operations are still ongoing.

  Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help!

  My MacBook is a 13-inch aluminum, late 2008, Running OS X 10.11.3

  System report:

  Presentation of the material:

  Model name: MacBook

  Model ID: MacBook5, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 2.4 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MB51.007D.B03

  Version of the SCM (System): 1.40f2

  Serial number (System): W8919BPH8QT

  Material UUID: 64CA23AE-66AA-510A-9A68-95E35F1AC9F5

  Motion sensor sudden:

  Status: enabled

  Sudden

  At ran Etrecheck, with the report as follows:

  EtreCheck version: 2.9.3 (253)

  Report generated 2016-02-11 14:08:26

  Download EtreCheck from http://etrecheck.com

  Duration 09:27

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Could not complete the following internal tasks:

  / usr/sbin/system_profiler - xml SPUSBDataType

  Problem: Another problem

  Description:

  Unable to restart or shut down. Error message indicates the operation is running, but I don't know what it is.

  Hardware Information: ⓘ

  MacBook (13-inch, aluminum, late 2008)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook - model: MacBook5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 161 - SN = W024902CY6GOA

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 7 days

  Disc information: ⓘ

  TOSHIBA MK2553GSX disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 249,20 go-go (174,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-868)

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Starfield.backupservice.plist

  ~/Library/LaunchAgents/com. LogMeIn.Cubby.Updater.plist

  ~/Library/LaunchAgents/com. MLBAM.nexdef.plist

  ~/Library/LaunchAgents/join.me.Launcher.update.PerUser.plist

  4 unknown files found. [Check files]

  Kernel extensions: ⓘ

  /Applications/transmit.app

  com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.5 SDK) [Support]

  / Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.7 - 10.4 SDK) [Support]

  [loading] com.squirrels.airparrot.framebuffer (5 - 10.10 SDK) [Support]

  [loading] com.squirrels.driver.AirParrotSpeakers (1.8-10.8 SDK) [Support]

  / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 - 10.4 SDK) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 - 10.5 SDK) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 - 10.4 SDK) [Support]

  / System/Library/Extensions

  [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]

  Launch system officers: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.rtcreportingd.plist [killed]

  com.Apple.scopedbookmarkagent.XPC.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 151 tasks Apple

  [operation] 71 tasks Apple

  14 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.GSSCred.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - weekly.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  [loading] 191 tasks Apple

  [operation] 86 tasks Apple

  10 killed process lack of RAM

  Launch officers: ⓘ

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [loading] com.google.keystone.agent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  [failure] com.teamviewer.teamviewer_desktop.plist [Support]

  [loading] org.macosforge.xquartz.startx.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [failure] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.barebones.authd.plist [Support]

  [loading] com.ciscosystems.ciscoconnect.daemon.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.logmein.join.me.update - helper.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.seagate.TBDecorator.plist [Support]

  [operation] com.starfield.backupservice.plist [Support]

  [loading] com.teamviewer.Helper.plist [Support]

  [failure] com.teamviewer.teamviewer_service.plist [Support]

  [failure] com.vmware.launchd.vmware.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist [Support]

  [operation] com.amazon.music.plist [Support]

  [operation] com.backblaze.bzbmenu.plist [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

  [loading] com.logmein.cubby.updater.plist [Support]

  [operation] com.mlbam.nexdef.plist [Support]

  [operation] com.seagate.dashboard.plist [Support]

  [loading] join.me.launcher.update.peruser.plist [Support]

  Items in user login: ⓘ

  Dashlane Application (/ Applications/Dashlane.app)

  Agent application RealPlayer Downloader (~/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)

  Degree application (/ Applications/Degrees.app)

  Sophos Anti-virus UNKNOWN (missing value)

  MacUpdate desktop hidden UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Join.me Application Launcher (~/Library/Application Support/join.me/join.me Launcher.app)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

  HP product search request (/ Library/Application Support/Hewlett-Packard/Customer Participation/HP product Research.app)

  HPEventHandler UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] at.appscape.degrees.24352

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001f.EtreCheck

  [ongoing] com.dashlane.DashlaneAgent

  com.evernote.Evernote.25952 [loading]

  com.evernote.EvernoteHelper [loading]

  [ongoing] com.getdropbox.dropbox.25312

  [ongoing] com.LogMeIn.join.me.Launcher.167712

  [ongoing] com.RealNetworks.realplayerdownloaderagent.95072

  [ongoing] JP.co.Canon.cijscannerregister.2272

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Web of Google Earth plugin: Version: 6.0 [Support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.0.11 [Support]

  AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]

  RealPlayer Plugin: Version: unknown [Support]

  AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  iPhotoPhotocast: Version: 7.0

  AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: 8 73 02 check the version build update Java

  User Plug-ins internet: ⓘ

  WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

  fileEditTool64_15: Version: 1.0.35.65 © 2013 - 10.6 SDK [Support]

  FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]

  Safari extensions: ⓘ

  AdBlock

  Add to the list of Amazon gift

  Awesome screenshot

  Dashlane

  CLEA. Video Nr

  EverNote Web Clipper

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Flip4Mac WMV [Support]

  Growl [Support]

  Java [Support]

  MacFUSE [Support]

  For Mac OSX [Support] Seagate dashboard

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 249,20 GB disc used: 74,98 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 999,86 GB

  Total number of backups: 6

  An older backup: 10/22/15, 12:25

  Last backup: 19/01/16, 21:00

  Size of backup drive: Excellent

  Backup size GB 999,86 > (disk size 249,20 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  1% kernel_task

  1% com.apple.WebKit.WebContent (7)

  Download RealPlayer 1% agent

  1% com.dashlane.DashlaneAgent

  Top of page process of memory: ⓘ

  647 MB com.apple.WebKit.WebContent (7)

  572 MB kernel_task

  233 MB mdworker (17)

  Safari of 201 MB

  DashlanePluginService 139 MB

  Virtual memory information: ⓘ

  75 MB of free RAM

  4.18 GB used RAM (903 MB cache)

  192 MB of Swap used

  Diagnostic information: ⓘ

  February 9, 2016, 15:36:32 ~/Library/Logs/DiagnosticReports/findNames_2016-02-09-153632_[redacted].crash

  com.apple.AppleSpell - /System/Library/Services/AppleSpell.service/Contents/MacOS/findNames

  Can you press and hold the button of power may be up to 30 seconds to ensure the

  computer is not simply put to sleep; you want him to stop. Then the attempt to start so he could

  run in safe mode, you can troubleshoot and try to check in the system as suggested:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Additional links to other content that may be useful to solve problems are included in the above page.

  Another element is Force Quit... it can be used to quit the finder:

  • Force an app to close on your Mac - Apple Support

  You may be able to use keyboard shortcuts in start to see on other actions at startup; as

  attempts to use modes of recovery for other restorative actions, repair permissions, etc. or for

  reinstall OS X again. If you have a backup of your content and also a Time Machine backup.

  There is a good reason to suggest that you could restore the computer to a viable State in front

  These symptoms or problems became so large. The test of original material would be on

  it comes with the installation of restore Apple DVD set than computers. Maybe it's worth a go, too.

  • For Mac - Apple Support startup key combinations

  • With the help of Apple Hardware Test - Apple Support

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • OS X: on OS X Recovery - Apple Support

  {Some newer models may have been updated to use the Internet recovery to restart the computer}

  online system - if the internal drive and its recovery partition missing somehow to any system start-up.

  The model seems to be too old for the Constitution or upgrade to make use of this feature, however...}

  If you have an external drive with a clone of the complete system on board, which could be used to test

  and troubleshooting of the material aspect of the computer; and a source for new offline installation clone.

  Perhaps the 'the etrecheck guy' will examine in this thread and point out some details that I'm not very familiar.

  Good luck in this case!

• Cannot print wireless since Snow Leopard upgrade

  I have an Office Jet all in one j6450. Since upgrading to Snow Leopard, I can't print wireless. I downloaded the new drivers. I also can I print a wireless test page so the signal is there, but I can't seem to print documents. I tried to uninstall, reinstall, perusing the printer utility, manually add the printer, etc, etc, etc. Any other suggestions? Thank you.

  Thank you very much, it followed all in good order and it worked!

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• I can't upload photos on faceboook since upgrading to firefox 17.0.1

  I have disabled add-ons, restarted firefox default. Still can not upload photos on facebook from my office. Any suggestions are appreciated! Thank you!

  I can't upload photos on faceboook since upgrading to firefox 17.0.1

  bad browser in computer science
  very slow
  cannot download photos on facebook
  problems very...

• Printing problems HP PSC 1210 since upgrading to Windows 7

  Hello

  Unfortunately, I have major problems since upgrading my PSC 1210 previously hassle to Windows 7 Professional (32 bit) on a Dell Latitude laptop.

  1. connect the USB cable from the system causes to restart almost 100% of the time. (Start with her already plugged the same result.) If it restarts not who does not necessarily mean that it will print. Although the USB connection is identified, the document does not print and gets stuck in the queue; by selecting either restart or cancel in the print queue does not delete it. Or turn off and unplug the printer. I have to restart my computer for him to clear, but it still doesn't work. Also, it gets stuck when I choose to print directly to the printer. More recently, I've only managed to print after closing of all the HP of the process in the Task Manager. (The same problem with restarting forced to plug in the USB cable happens sometimes when the analysis rather than printing).

  2. on the occasions I manage to do print documents, does not print black cartridge, despite having just replaced the cartridge and the perflecty black print on the test page.

  I hope you can help because it's incredibly frustrating and tedious, and I really prefer is not to have to replace what was until what Windows 7 a perfectly good printer!

  Thank you

  Olivia

  Welcome to the Forums of HP savemysanity,

  I see by your post that when the connection of the USB cable, the computer restarts, the print jobs stuck in the queue since the upgrade to Windows 7, the black is not printing from applications, but prints black on the self-test page. I can help you with this.

  Run all the updates of Windows on the computer. Updates Windows Installer in Windows 7

  I have provided a document through the steps to see if this will solve the problem.

  Print jobs are stuck in the print queue.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

  Run the System File Checker. This utility allows users to analyze and restore corrupted Windows system files.

  System File Checker: run sfc/scannow & analyze its logs in Windows 7 | 8.

  The chkdsk command or "Check Disk" utility is used in Windows to browse your entire hard drive and find problems.

  Run the Chkdsk utility.

  Try another port on the computer and another USB cable just to exclude.

  If the problem persists, would completely uninstall and reinstall the printer software.

  Uninstalling the printer software.

  Installation of the software of the printer in Windows 7 for a USB cable connection.

  There is no driver to download, drivers are drivers from Windows Update.

  What operating system go you to?

  If you need help, let me know.

  Good day!
  Thank you.

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• I bought 7 retail to upgrade to Vista and have since upgraded to 10. The product key is coming as invalid

  I have an old laptop that I am trying to set up for my daughter. It had XP on it and I have a physical disc of Windows 7 I have installed on it. I bought 7 retail to upgrade to Vista and have since upgraded to 10. The product key is coming as invalid. I thought that I could use it again since I upgraded from 7 to 10. Is the product key invalid, because I already used it once even if I'm not on 7? Can I buy just a key somewhere or I have to buy a new copy of 7 again? It installed fine that I just can't turn it on. Thank you.

  OT:

  Windows 7 product key

  Because the free update of Windows 10 used the license to the retail of Windows 7 as an eligible basic license, you cannot transfer it elsewhere or you reuse.

  You will need to purchase a new license of Windows 7 or buy a license for version full Windows 10.

  My recommendation to waive the license of Windows 7, I would buy a full version license Windows 10.

  Once you do this, you can just update the values of product key for your system runs Windows 10, and then reactivate the license of Windows 7 by phone.

  Buy Windows 10 family/professional edition

  then

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Since upgrading my ram installed shows 4 gb but says now only 2.93 GB usable why?

  Since I've upgraded to Windows 7 my ram poster now only 2.93 GB usable of my 4 GB.  Why would it be?  And that would be why my system seems slower since upgrade?  The performance is not as fast it was before Vista.  I am more than a little confused!  Why it does not use the full 4 GB?  Only just noticed this, so if someone wouldn't mind to tell me if there is problem I would be very grateful, I'm sure it was something before the 3 upgrade!

  Hi Linda,.

  There is actually a very technical reason for what you see, but basically it's because you're using a 32-BIT operating system.  If you use a 64-BIT operating system you would not see the problem.

  If you are interested, this post does a good job of explaining it is http://blogs.msdn.com/hiltonl/archive/2007/04/13/the-3gb-not-4gb-ram-problem.aspx , but basically, it's down to the way that the operating system uses the memory and how it spread what you can and cannot use.

  Long story short, that if you stay with 32 BIT, you're stuck with this...

  Hope this helps,
  Jon

  http://www.insidetheregistry.com

• I just bought an update of Windows Starter7 Windows Home PREMIUM 7 I can't find the upgrade button. Can someone help me please

  I just bought an update of Windows Starter7 Windows Home PREMIUM 7 I can't find the upgrade button. Can someone help me please

  If you have purchased the upgrade using Express upgrade, the product key should have emailed to your account you used to register for the upgrade.

  Also:

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Contact the Microsoft store:
  US: http://www.store.microsoft.com/Help/Contact-Us
  1-877-696-7786
  Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-Us

  Microsoft:

  Why should I use my Windows Live account or create a new one?

  Using your existing Windows Live account, or create a new account will give you access to your key product at any time online in the future. It is important to use an account and a password which you are familiar with to allow you to get easy access to your information and to receive the confirmation e-mail which will include your product key.

  Will send me you a confirmation email with my product key?

  Yes. An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.

  What happens if I lose my product key?

  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.

• How to quit Finder?

  How can I leave finder? When I commandq it is not to quit.

  You can not leave the Finder. You can start it if by Esc Option order, Finders, clicking recovery. However, this will remove all unsaved changes.

  Why you want to quit Finder?

• Webmail not working do not since upgrading to 18.0

  Since upgrading to Firefox 18.0, I am not able to transfer my Verizon email web client mail. I get a message saying "this message may have been deleted or moved to another folder. Initially, it started when I updated Firefox on a MacBook Pro running OSx Lion.
  In this case I use a Dell Studio 1749 under Windows 7 Home premium. This morning I logged Verizon email on my Dell using Firefox v 15.0.1 Verizon The customer email worked well and would forward and send new messages. During the upgrade to Dell for Firefox v 18.0. I can no longer send or forward the mail by using the Verizon customer.
  If there is not a fix for this issue is there a way I can save on v 15.0.1?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• Since upgrading my graphics card I have to turn my computer twice so he can start

  original title: display vista at startup

  Since upgrading my graphics a few years ago, I had this problem.

  Everytime I turn on my PC display is buggy and every time (every day), I have to hold the power button to turn off the PC, turn off the power to the rear... wait 30 seconds or two and then turn it on again.

  Then only the screen works fine.

  I use a nvidia GeForce 9500gt

  AMD 64 Processor 3800 + 2.40 GHz

  2.00 GB OF RAM

  Vista 32 bit OS

  Can someone help me with this please?

  Hello

  Your system use on-board graphics until you have added the new video card? If so
  / Settings (BIOS/CMOS) often F2 because you start - make sure onboard graphics
  are disabled. Or if you had an older video card make sure that it has been removed.

  Maybe you should remove ALL power and remove and reinsert the video card.

  I hope this helps.