Cannot read a full buffer on keithley 6485

Similar Questions

• Windows 7: cannot read games full screen

  Now, I know that it is a very common problem, but so far, I found nothing like that that I have a problem with. First of all:

  • Acer Aspire Z5600
  • Windows 7 home x 64
  • Intel Pentium Dual-Core E5400 2.70 GHz
  • 3.00 GB Ram
  • 500 GB internal Hardrive, 1 TB external hard drive
  • Intel G45/G43 Express Chipset
  • Native resolution 1920 x 1080

  Good at little about 3 months ago I had no problem with mode full screen and each game worked perfectly. Now, there are no games that I have who will play full screen without the screen goes funky on me. By funky I mean it becomes black, white, gray, (segments of quarter blue/red/green/yellow) then black again and go through this program permanently. I uninstalled the chipset and reinstalled with new drivers. I changed and tried all resolutions in all games with always the same effect, and this also happens when I try to change the native resolution. Nothing works but 1920 x 1080.

  If anyone can help me would be great. My chance is just something simple, but I've exhausted my brain on this issue for some time and I would like to help.

  (It is written for someone who does not know too well with Windows 7. Windows Vista must be the same fix. If there are any Windows XP delivers like this, post and I'll do what I can)

  OK I'm back after a busy holiday season and I solved the problem (of course, it was so easy). I did enter my menu START, click DEVICES AND PRINTERS. According to this device, your video card is under (mine is in my computer, all in a single image) you want to double-click on that one. Go to the HARDWARE tab and scroll down until you see your video card, you have installed (you can see a lot of options related to the card as well. It is fine). You're going to go into the PROPERTIES of all the topics containing your card and ROLL BACK THE DRIVER on the DRIVERS tab. This will remove updates that Microsoft has put on your card finally allowing you to play fullscreen (resize your resolution).

  I checked all Microsoft sites, Articles, affiliates, or even any help sites and the sad thing was, there was no help on this. However, I find a certain blip little info that triggered my mind to this fix. Microsoft had indicated there was a lot of problems with the updates that came out recently. That's all they said. Nothing to try and help and any info on how they will solve this problem with a new updated. As far as I know, there will be no update for this problem for ACER Z5600 all in One Touch screen PC Media.

  If restore all your drivers causing problems for any other software you have (no problem for me), then I suggest to update all your drivers again and do trial and error with restore and update until you have all the programs happy. If all cannot coincide, then I propose to replace one of you're games/programs (any software is to give the question) to a more reputable.

  Well, I really hope that this hotfix helps everyone with this problem. My life just that became much easier and not more mind frying time, lol. If this does work for you, then please click on "Mark as answer" if others can also enjoy their time again. : D

• Satellite U300 - CD/DVD drive cannot read disks

  My CD/DVD drive does not work.

  It can be heard at work (or maybe working), but it cannot read the discs - music films or niether. The 'properties', says the disk is full, but can not read the contents. Neither is it give details of the content.

  If I run iTunes or Real Player, suffice to say it is a blank disc in the drive and told me to get ready to burn to a disc. But in his own info says that the disc is full! Windows XP sees the drive in 'Properties' and said that it is complete, but does not display the contents of the disc. Devices, said the drive (type HL-DT-STDVDRAM GSA-U10N) "working properly".

  I have turned off the HDD (software protection movement) protection because he stirs a warning whenever the unit darn picked. I tried to use the drive with it on and outside. My computer is 18 months old (I think), but this problem has existed for a year and gets more and more frustrating.

  Help please.

  Hello

  You can find enough son here in the forum about problem of CD/DVD disc then please use the search function of the forum first.

  I founded an interesting thread for you you need to check:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162032

• Cannot read the contents of the phone

  My husband iPhone 6 has attracted 13 GB of data.  I use my phone more it does and I only use 6. Something has been bad for months, we have both called Verizon and nothing has helped. I'm trying to upgrade his phone now and iTunes tell if cannot read the content and I need to reset the phone.  I don't want to do it in case it is not completely saved.

  He was frustrated with his phone for months, may not have music on it, full, etc...

  I saw a solution in a similar thread, but did not want to download a 3rd party app to try to fix it.  Waiting for people to apple to help me understand this. Thank you!

  Please notify. Thank you!

  See if this thread (more old, but related) helps. ITunes cannot read the contents of the iphone

  If you're still using OS X 10.5.8. That being the issue. iOS 9 requires 12.3.x and this is the notability on OS X 10.5.8.

  -AJ

• Keithley 6485 error 800, "not consistent with active storage."

  Hello

  I use a Keithley 6485 to acquire a buffer of 40 measures, triggered via triggerlink.

  The VI works well, but of course, what happens if no trigger is to send to the device?

  So, after a timeout, the unit is configured again (reset and configuration commands).

  This is then the error produced responses from the instrument: '800, 'noncompliant with active storage' '.

   

  The source is that there is always an active storage (visible on the screen) and I try to reconfigure the buffer.

  Here: http://torque.oncloud8.com/archives/cat_keithley_6430.html

  I found a way to leave the mode of storage of the façade:

  When debugging of labview for the 6430 programs, you could get stuck with a "noncompliant with active storage" error This occurs when the aircraft is expected store data, but you try to give orders that change, for example, the size of the buffer. I have to admit, when I first stumbled across this, I am frustrated and rebooted the machine. The "Asterix" in the upper right corner indicates use it is in storage mode, where the error. Out of this, you must not turn off the machine. Simply tap LOCAL (to get out of the remote control) and then the STORE and then LEAVE. Phew.

  Can someone help me on how to do that through SCPI commands?

  I've tried Keithley support of the Netherlands, but they don't have an idea.

  THX,

  Ben Engelen

  Support of the keithley guys gave me a work around the problem: use the controls of the SCPI to push buttons.

  so before you send the reset command is send to the following:

  YST:KEY 28;     -store the button
  YST:KEY 32;     -exit button

  : * RST;                  -reset

• Cannot delete file: cannot read the source file or disk

  When you try to delete a specific folder which shows on the list, I get a dialog box saying: error deleting file or folder... Cannot delete file: cannot read the source file or disk

  Is the path to the really long folder?

  Any file or folder has a space beginning or end?

  Click Start, run, type cmd , and press ENTER to open a command prompt. In the command prompt...

  For a file test

  DEL \\.\driveletter:\path\filename

  For a test folder

  RD \\.\:\\
   
  If this doesn't help not please let us know the full path (and the name of the file if it is a file).

  Tricky

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works.

  Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works. I have treid to restore files but can not solve the problem. Or I can rip my CD

  Original title: windows media player

  Hi Felix,

  
  Welcome to the Microsoft Community Forums!
  
   
  From the description of the problem, it seems that you can't play music on Windows Media Player.
  
   
  Help me with more information.
  
   
  1 is this problem specific to music files?
  2. did you of recent changes on the computer before this problem?
  3. What is the exact full error message?
   
  I suggest the steps and check if that helps
  
   
  Method 1
  I suggest you to perform the following troubleshooters.
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  You can try to use the troubleshooting Windows Media Player settings Troubleshooter to automatically find and fix some common problems. See the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2
  If the problem is not resolved I would suggest you follow these steps and check if it helps.
  Step 1:
  Disable and enable Windows Media Player and check if it opens.
  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; clear the check box Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  Note: If windows media player 12 is already disabled, follow the steps mentioned below:
  After the restart, follow these steps:
  g. click on start and select Control Panel.
  h. click programs and features.
  i. click on Turn Windows features on the left side on or off.
  j. develop media features; Check the Windows Media Player.
  k. click Yes and OK to continue.
  a. restart the computer.
  This would be re - install windows media player 12.
  Refer
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• Bridge cannot read the format from my new camera RAW

  I just bought a new Sony SLT - A58 but bridge says that it cannot read the RAW format, so, I can't download my pictures.

  I went online and found an Adobe Camera Raw 6.7.1 and DNG Converter 7.4 plugins that supposidely would solve the problem. Nothing helps. Still refuse to recognize the RAW format.

  Desperate as it's my job to camera and and need it up and runing as soon as possible. I have had absolutely no problem with my older Sony A100.

  What's weird is that... If I pass the photos in the converter, it shows me the .dng pictures version, so something is there. Why the bridge can not see my RAW photos? ... and also, leave tons of caches and weird icons in the file, a real mess.

  I'm on Mac OS 10.6.8 platform (Snow Leopard) and using CS5... and Yes, all my programs and software are up-to-date.

  Thank you for your help...

  ... and happy new year

  So if the RAW support is specific, why do a plugin for CS5 and for my camera?

  Adobe has released versions of Adobe Camera Raw (ACR) immediately to ACR 1.0 (which was compatible with Photoshop 7). However, cameras supported varies according to the version of ACR and the version of the Adobe application.

  You must match:

  • your camera brand and model
  • the version of Camera Raw that takes in charge your camera brand and model
  • the specific version of Adobe software that supports the version of Camera Raw that you need.

  In your case, the Sony SLT - A58 was first based ACR 7.4 - which is only supported in CS6 and later versions. CS5 is not compatible with ACR7.4.

  Full list of supported devices is here

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  Applications of camera Raw compatible Adobe are listed here

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  CS5 is certainly not an antique and the A58 Sony isn't a huge technology Hasselblad. I have friends who have a large Nikon and Sony A77 and Canon and import their FIRST in their Bridge CS5.

  All that matters is that the specific camera corresponds with what version of ACR - and what applications are Adobe are compatible with this version of ACR.

  Can't comment on great Nikon or Canon mentioned above without specific camera model numbers.

  However, the Sony A77 is supported by ACR6.5 which is compatible with Bridge CS5 +. Easy to see why this combination works.

  Similarly, your Sony A100 was first supported by ACR 3.5, which is compatible with Bridge CS2 +. Easy to see why it works.

  Always read the tables linked above Adobe and cross with each other. That should clear up your confusion.

• How to open coloring that I downloaded to get to the final cut pro with it says: "cannot read the dictionary of the application or extension because it is not scriptable?

  Whenever I try to download the dyes or open, something pops up saying: "Cannot read the dictionary of the application or extension because it is not be scriptable." This has happened and I need to get it resolved. Help, please.

  What are pigments? What file format is it? Cam post you a screenshot of the window of information for it?

• iTunes cannot read the contents of the iPhone "iPhone 6 more»

  Please help because I can not backup my iPhone 6 Plus for my iMac and iTunes asks me to wipe it.

  When I connect the iPhone 6 Plus for the cable of the lightning, he says this: -.

  "iTunes cannot read the contents of the iPhone" IPhone Steve 6 + ".." Select the summary in the iPhone preferences tab and click on restore to restore the iPhone to factory settings. »

  The last back up, I've done was there a little more than 12 months and is an older version of iOS also so if I do a restore of the backup, it will be bad and lacks important information.

  Since then, I upgraded my iMac to El Capitan and updated my iPhone to iOS9.3.2 (just be updated to 9.3.3 now)

  System & software Specs are as follows:

  iMac 27 "V10.11.6 El Capitan (15G 31)

  iTunes V12.4.2.4

  iOS9.3.2

  Any help would be thank you very much.

  Please see the comment by David Lewis21 in this discussion of the CSA. I have not tested its solution, I can't vouch for it, and I have no other information. Try at your own risk. If you don't want to take that risk, I suggest that you contact the Apple Support.

• iTunes cannot read the contents of the iPod

  On a model MC540LL/A iPod running iOS 6.1.6 I get this alert:

  iTunes cannot read the contents of the iPod "IPod of Carl Carlson". Go to the summary in the iPod preferences tab and click on restore to restore the iPod to factory settings.

  There is no summary tab or the restoration.

  I have

  Restore all settings

  Erase content and settings

  along with several others that appear irrelevant.

  Which is appropriate?

  Thank you

  Connect your iPod to your computer and restore via iTunes

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  You can then restore the backup:

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272