Cannot retrieve/reinstall Mac OS Yosemite (No. HD/Locked)

Hello

Before I tried to reinstall Mac OS X Yosemite I erased my Macintosh HD first, but I got an error that I don't remember, after that it's what shows when I click my disk utility on Macintosh HD.

Then I went to pick up my laptop so I can use it again using the option reinstall, downloading files, then I got stuck without being able to choose a hard drive (only the HDthat recovery is only 650 MB is available but locked) now I'm a little stuck and cant recovery my PC only blocked this shown screen image.

I tried to do a technical service, but his strong where I live. Is there a way to get around this? Thanks for any help!

Your have one messed CoreStorage volume.

Reboot in Recovery Mode or whatever you used to access the external OS X Utilities menu and launch the Terminal from the utilities to the menu bar selection.

Cs diskutil list type and you should see something like the following.

The 2 paragraphs will erase everything on your drive. Make sure that you have a current upward.

Then, you must remove the UUID of the logical Volume that you should see at the bottom of the list. In my example the UUID is E77E0EAF - 32CB - 4378 - 8 C 48-530A4F87D77C. Type: diskutil cs deleteVolume (UUID)


Now find the UUID of Group of Logical Volume that you will see at the top of the list. In my example the UUID is CB76692D-D622-4A79-B2B0-409CD2675A91. Category: diskutil cs remove (UUID)

The above two commands will remove your volume of CoreStorage and erasing everything that he. Now you should be able to use disk utility to create your Macintosh HD and format it in Mac OS extended (journaled) with the plan of partition GUID and reinstall Yosemite.

If you see only the logical volume group that's ok. Simply remove instructions above.

Tags: Mac OS & System Software

Similar Questions

  • Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

    Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

    start at the top and work your way down to apply applicable patches until your problem is solved.

    If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

    If your error is:

    "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

    first of all, rename folder OOBE OOBE.old.

    to find the OOBE:

    Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

    Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

    Mac os: HD > library > application support of > adobe > caps

    Mac os: USER > library > application support of > adobe > OOB

    If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

    If you use an installation dvd:

    Copy the contents of the drive in a desktop folder and install from this directory.

    If you are using a mac:

    1. try to create a new user account in Mac with administrator privileges.

    2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

    3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

    4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

    5 restart the installation.

    If everything is applicable above fails, check your Setup logs:

    http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

  • How can I reinstall Photoshop CS5 and Photoshop CS5 in mac OS Yosemite?

    How can I reinstall Photoshop CS5 and Photoshop CS5 in mac OS Yosemite?

    Download the installer for Adobe

    Download the CS5 products

    Install and enter your serial number.

  • Mac OS Yosemite 10.10 cannot open after effect CC 2013

    I'm using the beta version of Mac OS Yosemite 10.10 3. When I finished to install After Effect 12.0.0, CC may not open. There always appear box said that there can not compatible for this OS X, although I used AE CC before 2013

    Install the update:

    http://Adobe.LY/AE_CC_1201_Mavericks

  • I need help I want to retrieve my mac pro book

    I need help I want to retrieve my mac pro book and now I can not bcz Yosimoto os is not avilabe what can do?

    < object edited by host >

    If you have installed Yosemite by downloading it from the App Store, it will be in your App Store purchases tab. If Yosemite is currently installed, when you start in the recovery Partition (command - R on a restart), you can reinstall Yosemite.  In the recovery Partition, you can also restore Time machine and disk utility is available.

  • Creative cloud window is empty in my Mac with Yosemite.

    Creative cloud window is empty in my Mac with Yosemite.

    I ran the uninstaller and the cleaning tool. All I get is the icon on the top of the menu bar and when I click it I have no option available to download any software.

    I had to re install OSX yesterday, not a migration assistant, but the creative cloud is not installed. I deleted all the files adobe, that I could find and nothing. I have re booted the computer after uninstalling and nothing. I need to install Premiere Pro today, I'm in a production company with projects that need to be delivered.

    All adobe for uninstalling solutions do not work.Screen Shot 2015-06-23 at 11.27.21 AM.png

    Thank you.

    I had to reinstall Yosemite from scratch and the creative cloud now works.

    Wonder first cannot import PNG files, it's like buying a desktop computer without a mouse and a keyboard.

    I wish I could go back to FCP 7. First opportunity to be a great software in early 2000, I do not recognize what is this software pretentious that I use now.

  • Try to install Photoshop elements 12 on my Mac running Yosemite.

    When you try to install 12 on my Mac, Iget the error "Setup cannot initialize. What should I do to get this back on my computer? I had it here for months, had problems with Yosemite, uninstalled and now cannot be reinstalled.

    Yes, I ran the uninstall program.

    After an hour of searching on Google, I found the solution. I had to update my Adobe Application Manager and was then able to install.

  • When I installed 10 windows on my mac, I accidentally deleted the MacOS Partition. I made a new D: drive partition in Windows 10, but when I go to the restoration of the internet and try reinstalling Mac, it says that the disk is locked. How to unlock thi

    So basically, I downloaded the ISO of Windows 10 file and installed using boot camp. During installation, I accidentally formatted the Mac OS partition and replaced with the windows one. Now, I'm trying to reinstall Mac OS using the internet retrieval feature. I partitioned a new D: drive named OSX, and there is no data on the disk. I then click on reinstall Mac OS. I try to select the disc of OSX I partitioned, but it says that the disk is locked. Anyone know how to unlock the drive or should I do something else?

    Thank you very much

    CJ

    I think one of the problems might be that my Windows partition has replaced the C: drive where was the OSX partition. I tried to move the Windows operating system on a drive b or e :), but it won't let me. Let me know if this could be a problem too.

  • Because I upgraded my Mac OS Yosemite, the scanner on my MX920 no longer works. I just get a questio

    Because I upgraded my Mac OS Yosemite, the scanner on my MX920 no longer works. I just get a question mark in my garden of Image. It was working fine before the upgrade.

    Hi lalyc,

    Reinstall the printer using the latest drivers on the Canon USA site should get the operational scanner.

    Please click here to access the drivers and software page for the PIXMA MX922.  Once the initial download to your model page, follow these steps:

    1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

    2. then please click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

    Once you have downloaded and installed the driver of CUPS on the site file, please install also all other elements of the section RECOMMENDED for YOU and the DRIVERS from the Web site.  To install the rest of the software which comes with the printer, please follow the steps above, except for step 2, you can click the red arrow next to the 'SOFTWARE' section instead of the RECOMMENDED section to locate and download the software.

    Once all items have been downloaded, please double-click on each of the items on your Mac to install. If you plan to use the printer wireless, please make sure to install the Canon IJ Network Tool changed after installation of all other software; It should be the last item installed.  Once all items have been installed, please restart your Mac and try to scan.

    I hope this helps!

    It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

  • My Photosmart HP 5510 Scan photos in the file on my Mac running Yosemite

    I get an error message that the parsing failed everytime I try to scan a photo.  I downloaded the latest driver through the Apple App Store.  I rebooted the computer and the printer.  Help!

    Hi @JaneCat,

    Welcome to the HP Forums!

    I understand that you cannot scan pictures of your HP Photosmart 5510 to a file on your Mac of Yosemite. I'm sorry to hear that, but I'm happy to help you!

    I recommend to download the drivers and full software functionality of our Web site, HP Photosmart 5510 e - All - in - One printer full feature software and drivers, as it is compatible with Mac OS X Yosemite.

    If you still have questions, I also recommend this analysis guide, a Message appears "No computer found" during scanning. Then follow the steps in the section that says it's for, Mac OS X 10.6 Snow Leopard, OS X v10.7 Lion, v10.8 Mountain Lion OS X or OS X v10.9 Mavericks. Given that these steps will still work on Mac OS X Yosemite.

    I also see this how to scan guide, scanning with HP software full feature in OS X v10.10 Yosemite.

    Hope this information is useful and thanks for posting!

  • Impossible to install Illustrator CS2 on Mac OSX Yosemite

    I'm unable to install Adobe Illustrator CS2 on my mac (OX Yosemite 10.10.3) because it gives the error "The Installation HFS disk no is not supported." However, the drive that I installed is HFS + and should be able to withstand that. In disk utility, I confirmed that the format is Mac OS extended (journaled), what is HFS +. I also ran check disk and disk utility repair disk, but both showed that the volume seems to be OK and I still couldn't install Illustrator.

    Does anyone found a workaround for this problem? I've seen a few old threads blocked on this issue, but they did not provide an answer to my question.

    CS2 can not be installed on OS X Yosemite at all regardless of the format of your hard drive.

    CS2 is a PowerPC application intended for the former PowerPC based Mac processors.

    Macs today have Intel processors that cannot run PowerPC applications without the Rosetta utility previously made available by Apple. OS X not supported Rosetta since OS X 10.7 "Lion" for Mac of today cannot run PowerPC as CS2 applications.

    Rosetta (software) - Wikipedia, the free encyclopedia

  • How to restore my Mac from Yosemite to Mountain Lion without losing all my CS5.5?

    How to restore my Mac from Yosemite to Mountain Lion without losing all my CS5.5?

    reinstall your cs5.5

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    window using the Lightroom 3 link to see these "important Instructions".

  • Photoshop CS4 doesn't open after upgrading to Mac OSX Yosemite

    I've recently updated for Mac OSX Yosemite and unfortunately, my Photoshop CS4 does not open. The message says that it requires of Java SE6. I now have the update of Java 7 71. I would like suggestions for someone who can help solve this problem. Thank you.

    Install the version of Java that Apple says that you need - because without this, you cannot go beyond the nagging Apple that you need a particular Java version (even if the application does not use Java).

  • I have to ios9.3.3 a 6s and updated iPhone and cannot retrieve old messages

    I have a 6 s iphone and updated to 9.3.3 iOS and now cannot retrieve old messages. I receive mail. I have not updated my ipad and can't receive old emails on this bequest is

    It is a POP email account? Have you set up things so that the device stores messages on the server for a certain period or until you remove them? If this isn't the case, message may have been deleted once delivered, so cannot be delivered again. See get help if you have any questions using a POP with multiple devices - Apple Support email account.

    TT2

  • I have an Iomega external HD model MDHD320-T. It has been used on an older Mac OX9 Office running. Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite? Thank you! George

    I have an Iomega external HD model MDHD320-T.

    It has been used on an older Mac OX9 Office running.

    Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite?

    Also, I find no other than ads Iomega site.

    Are they still in business?

    Thank you!

    George

    Search Wikipedia for LenovaEMC.

    The chances of finding software are slim to none.

Maybe you are looking for