cannot reuse some app?

Similar Questions

• AppStore does not download some apps

  I have a problem when trying to install some, not all applications on the Mac all the store. Specifically Todoist and Fullcontact

  Both were previously downloaded and installed via the Mac app store then deleted, the question of trying to reinstall door the same day and time. When I try to down load and reinstall from purchases (both are free) page of the app store download process starts very well but just before finishing I get this error message. "Todoist: to do list | "List of tasks could not download - use purchases page to try again" if I try again I just going round in circles. then error message in red against the app 'an error occurred' after the flags of app store if it linked to just the one app, I think that it is a problem with the developer, but it's not. Subsequently, I deleted some apps and reistalled them very well from the app store.

  Before that everyone is a little enough to answer Ive tried this after a search on the internet on the problem.  Delete all preferences and cache in connection to the app store all old preference for the im apps try to reinstall. Signed in and out of the appstore. interestingling both missed apps remain listed with their error message after I registered. Reset warnings etc in Itunes. The key here is that the incident relates to a specific time when I was using my macbook so I'm looking for the "nuke appsore" button if someone is willing to tell me where he is.

  Thanks for any help

  Stephen

  Hello Stephen,

  Thank you for using communities of Apple Support.

  From your post, I see that you are unable to update two specific applications from the Mac App Store.  Given the previous troubleshooting you have already completed, the next step, I would like to is to delete cookies from the Mac App Store itself.  To do this, you need to enable the debug menu by entering a Terminal command:

  1. Click on the Finder on your Dock icon
  2. Click OK > utilities > Terminal in the menu bar
  3. Copy the line below, paste into Terminal, and then press ENTER:defaults write com.apple.appstore ShowDebugMenu -bool true

  4. If the Mac App Store is open, close it and then the stimulus

  5. You'll see the Debug menu next to help in the menu bar

  In the Debug menu, select 'Delete the Cookies' and then close and restart the Mac App Store.  If the issue is resolved, then you will follow the previous steps for terminal, except for changing the Terminal command to:defaults write com.apple.appstore ShowDebugMenu -bool false

  Take care.

• Cannot find the app on my HP Officejet Pro 8500 a eFax

  Cannot find the app on my HP Deskjet Pro 8500 a eFax. For the eFax Webside only the eFax more and Pro services are available.

  The eFax free service not exisst more?

  See you soon

  Michael

  Hi Michael,

  The eFax service is not available for any model of printer.

  The only models currently supports the eFax App are HP Photosmart C510, HP ENVY 110 and HP Photosmart 7510.

  In addition, the eFax App was never offered for an all-in-one containing a physical analog fax card.

• Cannot read some burned DVD SD-R2212

  Hello
  Cannot read some burned a DVD with my cd/DVD-ROM sd-r2212.
  I have found no information on this drive (Dvdr-R or Dvd - R +)

  Where is the problem?

  Do I need a new driver?

  Thank you

  Hello Daniel

  What you mean with some DVDs. How do give you an answer if you are not specific to your problem?
  Which laptop model you have?

• HP CDDVDW TS - T633P SCSI CdRom - cannot read SOME DVD

  PC is a Touchsmart 600-1000 t, Windows 7

  DVD Player cannot read some DVD.  Completed all the 8 steps in "Drive cannot read disks (Windows 7)" on the HP site.  A ran HP "Hardware Diagnostic Tools" (linear CD search Test"and it passes on some DVDs and returns"No Media"on the other.)  Very old CD "Office for WIndows 95" and a few new DVDs (HP Officejet 6500 has more) past, but more brand new DVD and DVD written on the same computer is not detected.   Those who lack of DVD also will not autorun on my PC.  These same DVD which failed on my PC is read fine on my old Windows XP laptop.

  Strongly suspect one slightly out of the drive of alignment that must be replaced.  Ideas before ordering a replacement?

  Hello

  Check the automatic run settings in the control panel. Ensure that the measures to be taken when optical media are inserted represent the media format type that you create.  You can check the box at the top to use AutoPlay for all media types, then select the action for the particular media format.  Be sure to save the changes.

  You can also consider using Imgburn to read and write to check some media to see if you actually have some hardware issues. ImgBurn will also appear to what types of media are acceptable for the optical drive.

  It is also possible that the media you use is of a lower quality.  I prefer the Verbatim. It cost more but I've never had a problem with Verbatim.

  If your PC is under warranty then contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Pavilion G4-2029wm (AMD, Win 7 x 64): cannot detect some drivers after installing Win 7 Home Premium

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  Ongto wrote:

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  If you installed the Windows operating system without using the HP recovery media, then you will need to download and install all the drivers missing/software separately.

  Here is the link to the download page for your laptop: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5273741

• Cannot remove some hotmail contacts

  Cannot remove some hotmail contacts

  Hi dall50,

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• I can't turn on my firewall, error: Firewall Windows cannot change some of your settings Error code: 0 x 80070424

  My firewall is off, I went to control panel to turn it on and it comes up saying "Windows Firewall cannot change some of your settings Error code: 0 x 80070424" any ideas how to fix or what's goin'?

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• Home Premium 64 bit Ultimum 64-bit upgrade fails during execution. Error message: Windows cannot configure some components

  Upgrade problems. Home Premium 64-bit to 64-bit Ultimum.

  
  
  I tried several times to upgrade Vista Home Premium 64-bit Vista Ultimate 64-bit. It ends at until the end, but when it restarts, it says windows cannot configure some components and starts a restoration to Home Premium. So frustrating. Any help would be appreciated.

  Both Home Premium and Ultimate out of support in two months.  One company will receive technical support from Microsoft (security patches, etc.) after April.  Here is the political Support of Vista page.  'Not applicable' entries in the column of Extended Support mean that this edition is not eligible for updates, including critical security updates, after the end of standard support on April 10, 2012.

  http://support.Microsoft.com/lifecycle/search/?sort=PN&Alpha=Windows+Vista

  If you can, return your ultimate and buy business.  I realize that copies of business are becoming difficult to find.  Another option is to upgrade to Windows 7.  I suggest professional since Ultimate offer very little more than Pro (just the Bitlocker and multilingual support) and is also not intended for extended support after Windows 7 standard support ends after 2014.  Professional will extend support through 2019.

  Having said all this, I also had problems using the update with Vista installation option.  In many cases I resorted to the use of the custom installation option.  That does not work, but of course this means using Windows Easy Transfer to save your files and settings and reinstall your programs.  What I eventually learned with Vista upgrade can take all day even when all goes well, then there is not much time saved during a custom installation followed in any case of reinstalling the software.

  One thing you can try is to completely remove your anti-malware software.  Just turning it off is not enough because some antivirus programs install a watchdog on the part of the registry.  If something prevents the writing of registry entries at the end of the upgrade you so you would get a rollback.

• Problems burning an audio cd by using windows 7. error message: windows media player cannot burn some files. To investigate the problem, click on the icon next to the selection to burn the files. (Nothing beside files?)

  I am trying to burn an audio cd after that installation of windows 7 upgraded with windows media player.  It will not work I get the error message. cannot burn some of the files?  very frustrating.  thanx

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Firewall Windows cannot change some of your settings. Error code: 0x800704c

  I get this message when you try to turn on my firewall. "windows firewall cannot change some of your settings." "Error code: 0x800704c.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

  I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

  Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  Windows Firewall - MpsSvc

  BFE - base filtering engine

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start the firewall now

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security service center - wscsvc

  Windows Defender -windefend

  BITS - BITS

  Updated Windows - wuauserv

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• Windows Firewall cannot change some of your settings/error code ox80070424

  I get this message "windows firewall cannot change some of your settings/error code ox80070424.

  In a little more detail can help, like when is the message that appears and what OS you have (W7 starter Edition-home premium 32 bit 64 bit etc.). When the message started to appear? either you have installed a program or had a malware attack? (If you have or suspect that you may have been attacked by malicious software, then download, install, update and run a scan with Malwarebytesfree)

  This can be interesting to read - http://support.microsoft.com/kb/968002 not quite the same message, but the same error code, i.e. at least the fixit FW.

• When trying to activate Windows Firewall manually, get code error 80070422 0 x ' windows firewall cannot change some of your settings.

  I use windows 7.

  my windows firewall was disabled. When I click on turn on the firewall, that a message "Action Center can't turn on the firewall".when I try to turn on manually I get an error report that says error code 80070422 0 x ' windows firewall cannot change some of your settings.

  can someone please help?

  PS.i recently had a virus.

  See the thread below for a possible answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-start-Windows-Firewall-for-Vista/8d3ab846-d5a9-4DF1-bb1e-a6f4842abc63