Cannot run "Dreamfall" due to the 3D initialisation failure

Similar Questions

• HD has changed, now win 7 it says is not authentic but cannot run validator due to the error 0xC8000247

  Hello

  My hard drive died recently and I had 2 put new drives (RAID 1). However, windows (win 7 Home premium) I think that's not true, and when I click to solve, it downloads WindowsActivationUpdate which does not (error 0xC8000247). I'd appreciate any help to solve this!
  Thank you in advance.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Cannot run chkdsk/f of the safe atmosphere and the command prompt

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/run-chkdsk-f-to-check-for-hard-drive-corruption/05a2345a-a81e-4C44-A24B-ad299987a44c?page=2#LastReply

  Hello

  See if that helps you.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You are missing a space in the command:

  Type one of the following commands to run Chkdsk:
  NOTE: The most common command is chkdsk /f or chkdsk C: /f

  See you soon.

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• Impossible to determine return PID of launch AND can not run app due to the 8 error

  Hello

  I'm new on NDK BB as well as waterfalls and the C. M AI cannot run a sample application of cascade on BB Dev Alpha Simulator.

  When I try to run the app I get pop 'impossible to determine PID returned to launch '.
  The icon of the application on the Simulator, but when I click on the icon to launch the application, I get the pop up 'Impossible to launch my App name in the error 8'

  Please, can someone guide me what mssing 'em here.

  Concerning

  Hello

  I don't know how but my problem is now solved, today I just started the system. Clean, build and run the application and the error is no longer there (I tried several times yesterday, do not know why he has not worked at the time)

  @borceg build configuration is set to Simulator-debug

  Thank you all for your help.

  Concerning

• Cannot run Simulink DLLs at the same time that the execution of the target time real VI

  Hello

  What I try to do is run a dll created in the Simulink model to control some servo through a CompactRio 9014.

  For the moment, I managed to create three screws

  (1) in the FPGA target that performs the PWM channel desired

  (2) which takes the value of a variable that contains the desired position and network that feeds to the 1st VI

  (3) a VI that is running on the host computer that changes the value of the network variable to change the position

  I can get these three work screw and the servo controlled, but when I try to update the value of the network variable using simulation, by deploying to the target of RT simulation and running, he said:

  ' Access denied: this objective is already used by another host or project. »

  I guess that's because the project is already connected the cRio, so I unplug and am able to deploy the model files.

  However, when I try to run one of the screws in the Targer RT as well as simulation I get the error:

  "This VI is downloaded to the target, but is not present in the project you are trying to deploy.  All the screws on the target will be closed unless you choose to add the missing project VI. »

  With a large number of missing screws...

  I'd do this wrong, i.e. is there a simpler way to control inputs FPGA using the simulation, or is there something I have missed?

  Thank you

  Geoff

  Hi Geoff,

  I think I understand what you're trying to do and what you've done so far.

  If I'm not mistaken you have passed through the SIT connection manager, set your target RT (select DLL, mappings and hardware i/o) and this is his 'magic '.   If this is the case of look for the project pilot LabVIEW which was created by the SIT connection manager.  This should live in the same folder where is your DLL.  Open the pilot project, search for VI driver and open it.  Then go into the Sub - VI # 5 has with the name of the loop rate Base.  It's the Subvi who reads/writes on the material and the reads/writes the data to the DLL/OUT model.  If you want to read the output of your model and then manipulate the data that is where you need to add your code.

  Inside of this Base rate loop VI there is a Subvi with number 4 and called SIT take model Timestep.  This VI is the one who makes the call to the DLL model.  The output of this VI is your data from the model.  This data goes into slot - VI # 5, which is responsible for the drafting of these data to the material.  Since you want to manipulate that data from the model, you need to recover data from the wire coming from the Subvi 4 (SIT take model Timestep) before it gets to the Subvi # 5.

  In this VI of Base rate loop, you will see that there are a few empty block structures.  These images are for you to put any code you want.  The reason is that any changes you make to the driver VI and subVIs that aren't inside of these frame structure will be lost if you decide to go in the connection manager to sit DOWN again and make some changes.  The VI pilot gets new script whenever you do something in the SIT connection manager.  Whatever it is inside these frames will not be erased.

  So, if you have a code you want to run in parallel to the simulation you just have to drop it inside this driver VI.  Very probably within this Subvi 5 (Base rate loop). To add your code just drop the VI in one of these settings and make any changes that him so that he can read the data in the model.    Furthermore, the model (Subvi 5) data in a table.  For the index of each element in the array and its meaning look for a file in the same folder where the DLL is named readme.txt ports.  This file has a description of the inports and small ports and their indexes.

  This VI driver is called when run you the host VI so you won't have to run sepearately.

  Kind regards

  Ricardo

  National Instruments

  Systems engineering

• Trouble with my email, I try all I get the following, windows update cannot download files due to the error 3048,3...

  original title: what is 3048,3

  I have a problem with my email and everything I try the update of windows I get the following, can not download files due to the error 3048,3... Thank you

  Hello

  ·         What mail client do you use?

  ·         Update you are trying to install?

  ·         What is the full error message that you receive?

  ·         What is the exact error message that you receive by email?

  I suggest to reset Windows Update components and check if it helps.

  See the Microsoft KB article below:

  http://support.Microsoft.com/kb/971058

• Surprise! Cannot run an update with the new assembled - and your application.

  Dear forum,

  A few days ago Microsoft released a KB update for developers, update the runtime (from 8.0.50727.762 to 8.0.50727.4053) assemblies.

  Who caused all that we have built in the last days to require these new libraries, do not perform if they did not exist.
  This caused a disorder and confusion, since without notice - our QA (not to receive automatic update) and the developers who have yet to receive the update - could not run our products.

  Only after some frantic research, the problem has been diagnosed and corrected by providing all non-developers the new package of redistribution that contains the new revisions by the runtime assemblies.

  Now, putting aside frustration, I would really like to know what is the "Microsoft suggested way" to provide information on these cases. As most of our developers receive automatic updates 'silent', there was absolutely no way to guess what was about to happen. Even our engineer of deployment has not received the redistributable InstallShield appropriate.

   

  Please advise!

   

  Thank you

  Gil Moses

  Waves Audio Ltd.

  It is recommended that all customers get updated to the latest version and there are several tools such as WSUS and System Center Configuration Manager that helps you manage the updates. It is also recommended in some cases you are running the update in the test environment and so that caused no problem then distribute and you could either block or allow the update using these software.

  Updates are being tested before release to ensure that they work properly, but it is not possible to test all because you're a developer, you know. And when such cases happened you can contact Microsoft Support and open a support case to help solve this problem as soon as possible.

• Cannot install C++ due to the Error 1935

  Hello

  Yesterday, I downloaded the plugin to use in a recording program I've used for years, running the 32-bit version (a 64-bit version is available).  When you install the plugin from the trial, I got a message later, that I didn't write down, indicating that the installation was not successful.  I don't remember how the trail search online lead me to think, it was a problem with Microsoft Visual C++, but that's where I found myself.  To attempt to reinstall C++, I continually get error 1935.  I cleaned the registry, I "fixed" the framework, I made sure the service associated with the facilities of confidence is running, and yet I can't find any way to get x 64 C++ to install.  So, I uninstalled all instances of it and rebooted.  I can get x 86 to install, but that's all.  Because I deleted the previous instances of the c ++, my application will not open (citing that this mfc110u.dll is missing), and I am only a few weeks a deadline for a project that I had to have put together.  Apparently, the x 86 plugin does not cover x 32 and x 64 bit programs?

  I'm running a gateway DX4860 with 6 GB of RAM, 3.30 ghz, 64-bit and Windows 7 Service pack 1.  Unfortunately, I never got a Windows 7 disc with my computer and said just back upwards frequently.  I don't have any system, restore points I just record my music projects backed up on an external drive.

  I would be extremely grateful to all those who are likely to help him.

  Thank you

  Joe

  Hello Joe,

  Thanks for posting that ask you about Microsoft Community Forums.

  If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted.

  I suggest you to follow the below methods and check.

  Method 1:

  To correct this install error, you must clear the log.

  a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "Run as Administrator" and click "Allow" for the elevation prompt

  b. in the command prompt, type the following command:

  true fsutil resource setautoreset C:\

  c. which assumes that C: is the drive in which windows 7 is installed. If it is installed on another drive as D:, please change the appropriate drive letter.

  d. restart the system.

  e. install the software and check.

  If the problem persists, try Method 2.

  Method 2:
  Another cause of this error is an unsuccessful installation of Windows updates or packages custom MSI could have left on the faulty registry under HKEY_LOCAL_MACHINE\COMPONENTS keys.

  Please check if all windows updates are installed successfully

  Reference:

  Install Windows updates in Windows 7

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If the question did not resolve, try Method 3.

  Method 3:
  You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ Redistributable Package and check if it helps.

  Step 1: To uninstall all versions of Microsoft Visual C++:

  a. press the Start button and select Control Panel, and then click programs and select programs and features.

  b. in the list, find him Package redistributable Microsoft Visual C++ and click it.

  c right-click on it and select Uninstall

  d. restart the computer.

  Step 2: Download and install redistributable Microsoft Visual versions of Package and check to see if it helps.

  Later supported Visual C++ downloads
  http://support.Microsoft.com/kb/2019667/en-us

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• System Restore cannot run ' do allow you the program following an unknown Publisher to make changes to this computer: rstrui.exe '? "

  I'm trying to run a system restore, and I have Windows 7.  The problem started when Yahoo hacked my Google with Firefox search engine.  I could not understand how to get my search engine to Google, so I tried to do a "system restore."  I get a message from "user account control" who says: ' do you want to allow the program following an unknown Publisher to make changes to this computer: rstrui.exe Editor: unknown origin of the file: hard drive of this computer. "  I think that rstrui.exe is actually the Windows program for the restoration of the system, but I don't think I should get a message like "Editor: unknown."  I ran Malwarebytes Anti-Malware and Spybot, but came to nothing.  If my system restore has been disabled?

  Hello

  This can help you, because these are a few reasons for problems with SR:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  See you soon.

• Cannot run Windows Explorer using the interactive services detection

  Hello

  I have the tool using the interactive services detection to display applications. I have to refrain from using the Terminal Server services for the moment and the DSI is the only option I have. Now the problem is, this tool must run Windows explore periodically as well as other applications Viz Notepad, wordpad. It shows notepad and wordpad but always fails to open windows Explorer. Any ideas on that?
  PS: everything what I described above works great with the Terminal Services
  Thank you
  Madhu

  Hi Madhu,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot run command to config the NAC perfigo service

  I have a new Server Manager of the NAC for a deployment costs. I logged in using the root with a connection password set on the server.

  I can't be able to run the 'service perfigo config' command to perform the initial configuration of the CAM.

  [[email protected] / * / /] # start service perfigo

  perfigo: unrecognized service

  [[email protected] / * / /] #.

  No idea what could be the problem?

  Thanks in advance.

  Have you installed the CAM software on it, or it was already installed?

  If it was already, I recommend you the image with the DVD.

• Cannot run business ruleset using the Launcher command line for the calculation Manager

  Hello

  I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

  D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

  At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

  Local planning: en_US

  using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

  EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

  using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

  For the non - RFP app, ask size is not necessary

  EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

  Support RTC Essbase Version: 0xb1221

  null

  But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

  Any help on this request would be much appreciated. Please notify.

  Thank you

  AP

  Please ignore this request,

  I found the KB article below

  Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

  Thank you

  Arun

• DW036: Payload cannot be installed due to the failure of the operation dependent

  Try to re - install Photoshop elements on a mac, OS X Yosemite system 11. I get this exit code 7 with the dw036 error.

  with these:

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe WinSoft Linguistics Plugin CS5: installation failed

  ERROR: DW050:-Photoshop Camera Raw for 11 elements: installation failed

  ERROR: DW050:-organiser of 11 items: due to a lack of Language Pack installation

  ERROR: DW050:-Organizer_AdobeElements11Organizer_en_US of 11 items: installation failed

  ERROR: DW050:-Adobe XMP panels CS5: installation failed

  ERROR: DW050:-AdobeTypeSupport CS5: installation failed

  ERROR: DW050:-Adobe CS5 language: installation failed

  ERROR: DW050:-AdobeCMaps CS5: installation failed

  ERROR: DW050:-Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: installation failed

  ERROR: DW050:-Adobe Photoshop elements 11: due to a lack of Language Pack installation

  Please help on how to work around or fix this problem. Tried to restart the system, cleaning of files, rename files, reloading in safe mode, etc. etc. Nothing has worked.

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs