Cannot save a copy under? help please?

Similar Questions

• Cannot "save a copy under CS6" in After Effects CC

  Hi all!

  My after effects CC doesn't have the "Save A Copy as CS6" function available in the Save menu. Can someone help me? Another project, I'm a CS6, but can not open files created by one of the options listed in the attached screenshot.

  Thank you!

  Mike

  

  As Rick says, some other posters are asking what happened to register as cs6?

  If the researchers of the future forum find this post instead of only one, 2014 CC's After Effects version 13. It is all too different from CC (version 12) as CS6 (version 11) was of CC. Each new version uses the new features that are not supported in previous versions. It takes a lot of development and testing (test for the most part) to make sure that save-back features work. I would rather they develop faster management, made faster, more stable release than for them to spend the hours of work to give us a feature 'save the return of two versions'.

  CS6 and CC are available in the creative application of cloud, so you can save some Wikipedias back!

  You can save the return 2014 CC to CC, and CC to CS6 and CS6 to CS5.5, if you wanted to.

  And don't forget that, until a few years ago, there has never been a version previous backup feature.  CS5 (version 10) and earlier, you could not save backward at all.

• I was working in adobe muse, and suddenly I close the program. UID error: 5956.  As I can get it back what worked? Do not hit to save my work. Help, please

  I was working in adobe muse, and suddenly I close the program. UID error: 5956. As I can get it back what worked? Do not hit to save my work. Help, please

  
  

  
  

  
  

  If you say 'no' to recovery, all changes made since the last Save will be lost.

  The error appearing on the launch, during recovery, says something so bad when you are already working with Muse and rather than saving a problem in your Muse .muse file set up an error message and stop.

  If you do not already revived and selected 'no' to recovery, we are able to recover manually you are unsaved work and fix the problem in the unsaved changes that is causing the error.

  Please send us the .muse file and the folder "Recovery" at "~/Library/Preferences/com.adobe.AdobeMuseCC.2015.0/Local Store" at [email protected] as well as a link to this topic for the context. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing.

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• Cannot find this module. Help, please!

  I want to edit this module, but can't find it on the model of Module, licensed content anywhere...

  module_productfeaturelist, featured, 100, default, true

  Help, please. Thank you!!

  Hello

  This module is detailed here: http://kb.worldsecuresystems.com/134/bc_1345.html - module_producfeaturelist research

  Specifically, the last parameter determines what provision he used. If it is set to true, the product small backup page layout is used - and you can find under Templates Module - > online store layouts. Or if you use FTP under Layouts-> online store.

  Thank you

  Florin Carlig

• Adblock Plus working on main identitiy, stopped on the other profile, when I try to download it on another identity, "firefox cannot change the file'message.help please"

  don't know why, but the block of adplus works do not on the other account. When I tried to download it again, he says firefox can not complete... can not modify the file, help please, the amount of the pop ups and ads and the size of them is annoying to say the least. Thank you

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

  If that didn't help then also try to delete the file addons.sqlite.

• Userinit.exe WINDOWS VISTA cannot open a session! Help, please

  I've accidentally disabled and removed userinit.exe thinking it was a virus of our pc at home. I created a Vista recovery disk to try to restart and copy the file by using the command line option in the system recovery console.

  I had no luck trying to use some commands that I found online. All solutions are for platforms which are not vista. Can someone help me please?

  I can't connect to all accounts because of this problem.

  Hello

  a Vista recovery disk?

  of neosmart?

  It's only for repair system, System Restore, etc. don't replace only not system files

  read this

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair System Restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• nslookup works, but ping fails by hostname (works of intellectual property). IE cannot display this webpage. Help, please!

  Cannot access Internet on my laptop with Windows XP SP2 installed; uninstalled firewall; Microsoft Security Essentials (AV) installed

  ipconfig/all shows a 192.168.x.x ip address to my ethernet card.

  TCP/IP properties are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically."

  I am able to search names and ping by ip address but cannot ping by hostname. When I try to navigate through a Web site, it displays the message "Waiting for http://xxx.xxx.xxx ' in the status bar, but fails to load the Web page.

  I tried a few sites by their IP with the browser, for example 212.58.244.143, and IE was able to load the Web page (without any objects of course requiring name resolution).

  Able to ping loopback (127.0.0.1) as well as the computer by its name (which resolves to the ip address is assigned to the).

  ARP - a shows the entrance to the default gateway. Able to ping.

  I did ipconfig/flushdns and / registerdns without effect.

  Even with net stop dnscache and net start dnscache.

  Manually reset TCP/IP too by following the instructions here.

  Also used "netsh winsock reset catalog" according to the guideline here.

  Running out of ideas here... could someone please advise what to do? Or what additional information it would take to solve this problem?

  I met the same problem on win7. I also tried each solusion what you tried.

  In the end, I reinstalled the tcp/ip stack and solved this problem. Try the following steps:

  1 remove

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

  2 reset

  3. right click on the network connection and then click Properties. Reinstall the protocols of the disc. The location is 'C:\Windows\inf '. Choose the «ipv4...» "and"ipv6 ".

  4 reboot

  Everything is ok.

  Good luck!

• blocked sfdrvup.exe (Windows7), UberSoldier cannot start, I need your help please

  UberSoldier (2006, for Windows XP sp2 or lower) game successfully installed on Windows7, but blocked driver incompatible. Burut creator and Publisher CDV using the StarForce Protection drivers, so I asked the producer for a compatible. They sent me sfdrvup.exe, but Windows7 found potentially dangerous access and blocked to that file. I can not start the game. Can someone help to solve this problem please? Thank you!

  I can provide you with more information if necessary.

  Hello
  Check if the game is compatible with Windows 7:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Cannot rotate the Photos! Help, please

  I can't turn my photos.   I have most of my photos on external hard drives.  When I try to turn them (per click, open in paint or open them in Windows Photo Viewer) Windows 7 don't rotate.  Instead, I get an error message indicating that "you can not turn this image. The file may be used or open in another program, or the file or the folder may be read-only. "I tried to give my complete access to the user account on the external drive, and I also tried to score the file, the folder and the only readable drive.  He's going through and looks like it is something, but in the end, I always get the error message.  I can turn them if they are on the C: drive, but my C: drive is too small to hold my collection of photos...  Help!

  I just installed Windows 7 Professional 64-bit, and I couldn't turn one of the photos on my internal hard drives. After clicking out of around, I realized what the problem was.

  You must:

  1. click on the start menu.
  2. click on computer.
  3. right click on the drive that gives you trouble.
  4. Select Properties.
  5. click on the Security tab.
  6. click on the Edit button where it says "to change permissions, click on change."
  7. in the "group or user names", click on the user you want to change. On my computer, I had to choose 'Users (computer-name\Users)' at the bottom of the list.
  8. in the area 'Permissions for the users', click the checkbox to allow full control.
  9. click on ok.

  There are boxes popup telling you that it cannot change permissions on some files. Just click ok to continue.

  Repeat these steps on each player that gives you bad.

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• chips out of my system of netrome monitor I replaced the monitor, but now all I get is 6 boxes of gray and cannot minimumize the screen any help please

  I work for a small Christian Rehab non-profit and security sysytems netrome monitor fried this weekend I replaced it with another monitor, but now when I punch the blackbox upward all that I get is 6 gray screens and I can't minimize, is there something I can do to get the operational cameras.

  Hello Mark,

  You must contact the support Netcrome for assistance

  http://www.netrome.NET/Netro/Eng/BBS/Board.php?bo_table=z3_2

  Hope this information helps.

• Cannot install windows 8.1 help please!

  So I have recently just windows 8 pro on my dell studio and I love him but I am wanting to upgrade to 8.1 windows but the update does not appear in the store windows for me. I tried to reset the store windows but that did not help. I did a check of updates for windows 8, but he said that no important updates must be installed which means that I must be good in terms of updates. A message on my screen earlier appeared asking me if I wanted to update to windows 8.1, so I clicked on install and then a message from the store windows popped up saying that the 8.1 windows installation was not successful on my laptop. So I wonder why can't I install/upgrade to windows 8.1? Moreover, the version of windows 8 that I have on my laptop of volume license, could it be prevents me from updating to windows 8.1? The answers will be appreciated thanks :)

  So I have recently just windows 8 pro on my dell studio and I love him but I am wanting to upgrade to 8.1 windows but the update does not appear in the store windows for me. I tried to reset the store windows but that did not help. I did a check of updates for windows 8, but he said that no important updates must be installed which means that I must be good in terms of updates. A message on my screen earlier appeared asking me if I wanted to update to windows 8.1, so I clicked on install and then a message from the store windows popped up saying that the 8.1 windows installation was not successful on my laptop. So I wonder why can't I install/upgrade to windows 8.1? in addition, the version of windows 8 that I have on my laptop's volume license could it be preventing me from updating to windows 8.1? The answers will be appreciated thanks :)

  Hello

  Read this:

  https://social.technet.Microsoft.com/forums/Windows/en-us/8db5ea3b-1a00-44af-b531-8925ef6f38c1/MAK-volume-license-upgrade-from-Windows-8-to-81?Forum=w8itproinstall

  See you soon.

• Cannot cancel the subscription. Help, please.

  I can't stop my subscription for creative cloud. He said I need to contact support people. After that I start to fill in the details about my question, he said:

  If you are already connected, select phone or chat from the options below.

  and no options are read at all. (I'm connected)

  Hi Amr,

  Please try to rest your browser.  Try to clear the caches and cookies before contacting support: Contact Customer Care

  Let me know.

  Concerning

• Cannot save my copy of PH CS online.

  Says something about connectivity issues, but my connection is fine. I'm not real tech savvy, so go easy on me.

  If you really mean the 12 years, Photoshop CS, then see

  Download Acrobat 7 and CS2 products

  Applies to the owners of CS too.