CANNOT SCAN FROM HP OFFICEJET 7500 A COMPUTER PRINTER CONTROL PANEL

Similar Questions

• Cannot scan from HP Officejet G85. Printer detected but no scanner.

  Hello
  I have a HP Officejet G85 all-in-one.  HP offers not only drivers or software downloads with Windows 7 support.  They recommend just plug the printer, let Windows 7 recognize it, and the WIA drivers will be installed for the basic functions.  They suggest scan from paint or Windows Fax and Scan.  However, when I try to either, it says that no scanner is connected.  The G85 is recognized as a printer and print very well.  Is there something I need to do to get Windows to detect the scanner as well?  Is it possible that the scanner WIA driver do not settle?  I tried to unplug and plug back in, but still that the printer is detected.  Thanks for any help.

  He never goes to work better that it did in Vista, unfortunately according to HP, this is an obsolete unit and they do not plan to spend more on it.  If you read: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00808543&lc=en&dlc=en&cc=us&product=60399&lang=en scroll down to the section on digitization.

• HP Envy 110 - cannot scan from printer (using Mac Maverick)

  I have a MAC with OSX 10.9.4 operating system and a printer HP Envy 110 with the newest driver printer HP Maverick.  I can scan Mac.  However, I can not run a scan directly from the printer control panel.  The sign says "make sure that the HP printing software is installed.  For MAC and USB connections, "Enable Scan to Computer" is automatically activated".  Everyone else has had a similar problem?

  Hi Melnee,

  Thank you for your answer! Please, try the following solutions:

  • Reset the printing system. OS X Mavericks: reset the printing system.
  • Verify and repair disk permissions. 12.x disk utility: repair disk permissions.
  • Look at this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005.

  Hope this information is useful and have a great day!

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• want to remove some programs from my "adding and deleting' on the control panel

  I am wanting to remove some programs from my "adding and deleting' on the control panel.  I have several that I don't know if they are necessary in order to do not want to delete them until I have found.  Example: Microsoft.NET framework 2.0 service pack 2, if I said the same thing with the exception of program 3.0 can remove either one or both or what?  Redistributible MS Visual C ++ 2005 and also have 2008 and 2110.  Platform Installer 3.0, WCF RIA Services V1.0 for visual studio 2010.  I don't even remember downloading all of this stuff, but don't know if it has a meaning to my computer or not.  Y at - it somewhere I can look to find such information?  Don't like silly things like this, but would rather ask that screw up something.  Thank you

  Hello

  • What version of Windows are you using?

  I suggest you to see these steps:

  a. type msinfo32 in the start search box and press on Enter.

  b. a pop-up window, press CTLR + A, then CTLR + C and after that information here.

  c. then we can suggest you what program needs to be uninstalled.

  Response with more information

• Computer not found displayed on the printer control panel. ?

  Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

  Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

• Scanning from feeder OfficeJet Pro 8500 has

  I tried to search several times but I can't seem to find anything that addresses this specifically.

  I'm trying to scan multiple pages on my OfficeJet 8500 a on a machine running XP.  I deally I would that they in a single file, but if not possible I can deal with that later.

  However, unlike other scanners XP, I used, there no option to select the tray as the source.  This doesn't seem to work when you try to scan directly from the printer.  Instead, I get a blank image scanned from the glass, and no paper is fed.  Documents (a stack of 9 or more) * are * inserted in the charger as they should be, as much as they are when I copy successfully all the time.

  Please tell me it is possible to do - it seems like a no-brainer.  What I am doing wrong?

  Well, it works now.  Don't know what I did differently, but there you go.

• All-in-one HP 1536dnf: cannot scan from the ADF and glass to a single PDF file

  Hello

  There is a user who needs to scan some papers, but he wanted to do the following:

  -scan of the papers of the ADF

  and

  -scan of glass papers

  and he wanted to merge all this into a single PDF file.

  The announcement of the user he could do before, we implemented a new computer.

  On my side, I did the installation of the drivers and as the default scanning software and indeed the scan works, but once you star scanning from ADF he will not identify any which paper on the glass and displays the message "no book on ADF.

  And when you start scanning from glass it will identify ADF even if there are some papers. Instead, it will scan the same page, if she stays or it will scan empty.

  Well. It became a long text, but any help will be welcome.

  Thanks in advance

  Hello

  It works this way because they are TWO different operations. There are a few free software around which allows us to merge several PDF files into one file. You should probably do this way. The following link is one of them:

  http://www.PDFSam.org/download/

  This free product allows you to divide a large file to many small files (such as the extraction of the chapters of a thick book) and also merge several pdf files into a pdf file.

  Note: use the free.

  Kind regards.

• HP Officejet 8500 A909a: HP Officejet 8500 A909a accepts most of the computer print control

  I have had this printer for years and never had a problem.  Then he stopped accepting the scan command.  I went for the scanner and printing doctor and follow the guests, including the installation of the new software.  Now, it scans when ordered.

  BUT it does not now print.  Not an image, not a document.

  I was again through the guests of scanning/printing doctor, uninstalled then reinstalled the software.  But nothing!  However, if I put something on the screen of the printer and press the button on the printer, which will print.  Is simply not wanting to accept commands from the computer.

  Any ideas?

  Hello @Stellabelle,

  Thank you for your response.

  Since you are using a USB connection, do not follow the steps I mentioned in the post above. Try the following steps:

  • Unplug the USB cable from the printer to the PC.
  • Go to Control Panel - programs and features and ensure that no printer Officejet from HP in the list entry. If there are, uninstall the same.
  • Restart your computer.
  • Click on http://ftp.hp.com/pub/softlib/software12/COL31041/mp-88604-3/OJP8500vA909_Full_14.exe and install the drivers.
  • Connect the USB cable as long as you are prompted.
  • Try to print now. If further questions, go to the next step.
  • Go to http://hp.care/2c5YKY5 and expand "Manual steps to solve the problem" and follow the steps under "step 4: Verify that the correct port is selected.
  • Now, try to print and check.

  Hope that helps!

  Good luck

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP officejet 7500 has problem printing multiple pages

  JO 7500 a, on home wireless network, only prints 2 pages of a document and then stops and 'error', said

  (W8.1)

  Hello AndrewCorser,

  Thank you for your updated answer. Please follow these troubleshooting steps in order:

  Uninstall your software on the computer. I'll give you a document from HP on software control panel uninstall. (Unplug the USB cable from your computer.)

  Then, please disable all programs that run in the background: (this information has been said here.)

  1. Press simultaneously the Windows and R. In the run box, type msconfig, and click OK .
  2. In the System Configuration window, click the option next to Selective startup , and then click the box next to Load Startup items to remove the check mark.

• HP Officejet 7500 E910: Cleaning print head

  I understand that the printer starts a sequence of cleaning from time to time, which uses ink. I wonder what is happening to the ink. It moves to a "cesspool" of sorts, and whether itself needs cleaning occasionally?

  Thanks if anyone can help.

  Officejet 7500 has been evaluated for a duty cycle of up to 7000 pages per month.  With a standard 12 month warranty, this would imply a guaranteed page 84K service.

  Personally, I would not add a drain system, there are probably other things that would wear until the capacity of the station would become a problem.  (For example, the coding Strip would probably need cleaning or replacement, see the post here)

  I suggest do things to minimize ink spit in the service station:

  • Keep the printer plugged in to an outlet. If an external passes as an output switch is used more ink will be used at startup.
  • Don't run don't not cleaning cycles since the Panel Toolbox or before if necessary (very rare).

• Can print control panel test pages, but cannot print from applications (Word, WP)

  Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

  Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

  Hi Doug,

  
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
  
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the printer?
  2. have you made any recent hardware or exchange of software on your computer before the show?
   

   
  Please follow the methods and mark the question below:

  Method 1:

  
  Step 1:

  Run the Microsoft Fix It from the link below.
  
  Diagnose and automatically fix problems printing and printer:
  http://support.Microsoft.com/mats/printing_problems/
  Step 2:
  
  Follow the steps in the link below.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  
  Method 2:
  
  Follow the steps in the link below.
  Find and install printer drivers in Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Method 3:
  Follow the steps in the link below.
   
  Why can I not print? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If the problem persists then I suggest to uninstall and reinstall the printer drivers.

   
   
  I hope that the information above helps you.

• OfficeJet pro 8620 e: Printer Control Progra

  When I first installed this printer about 2 months ago I had a program on my computer that all I had to do was click on scan, difficulty settings, and then select scan and it should scan.  Somehow, I don't have this option anymore.  I want to be able to sit at my desk and control the scan from there.  What should I do?

  Hello @Doris422!

  Thanks for posting on the HP Forums!

  I would be more then happy to help you with regard to the analysis of the computer.  The program you are talking about seems much analysis of the HP.  The first thing I recommend is to search the Windows 8 for HP Scan computer.  The best way to do this is to open your Start Menu and start typing the HP scanning.  The computer will automatically find it and it should appear as the first option.  Open it and see if you can start a new search.

  If this does not happen and HP Scan is not the case in sight so I recommend you to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.  The software that you re - install will include scanning HP.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP Officejet Pro 8620 full feature software and drivers

  If you please, after back and let me know how everything goes

• How can I get the sidebar at the time when I open my computer or control panel?

  I was doing a reformat on my computer and accidentally ticked the wrong box.  I can't get the sidebar that gives you options as to what you want to do.

  I think the following will return the "sidebar":

  1. Start button

  2. click on Control Panel

  3. click on Folder Options

  4. on the general tab, under section tasks, click "show common tasks in folders".

  5. click on OK

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to access the Documents, computer or control panel, Windows Explorer says reboot

  When I try to access my documents, computer, etc. in the start menu, control panel I get the message window Explorer it restarts attempts to restart, but when I try again, it does the same thing. Hope that there is a simple solution to this problem. I can get the internet without problem.

  * original title - Windows Vista startup *.

  Hi Florence.

  The following thread seems to be a similar problem. Take a look at the troubleshooting inside and see if it helps with your problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-Windows-Explorer-has-stopped-working-when/1d1b60d1-9587-466C-A427-511c5691af2a
  I hope this helps.