Cannot scan HP Photosmart C4780, Mac OSX 10.9.4

Similar Questions

• Cannot scan HP Photosmart C3180, Mac OSX 10.9.5 after update V.3.0

  Hello

  today I installed the version 3.0 of HP in my Mac. but now the doesn´t scanner works.

  I tried all the tips on the HP site but nothing

  any idea?

  Hi @Alex_Mezaros

  I would like to do my best to help you. Given that the question was just when you did the last update, we will remove it. Please follow the following steps and let me know the result;

  1. From the desktop, double-click the Macintosh HD icon.

• HP Photosmart C4780 MAC OSx 10.8 Mountain Lion

  When printing, a few lines of text, from the left to the right of the page, only display the top part of the letters.  Other lines are fine.  Printer status report shows same problem, but otherwise ok.

  Yes, you can try to clean the print head. This is one of the best ways to solve print quality problems.

  Let me know how it goes.

• Cannot scan to or from Mac to C4780

  I had problems to blur or no image when scanning. I used to use an option to scan HP on my Mac. But I updated the drivers for OS X 10.9.3. I have more drive full version.

  Help! You will need to scan some pictures and documents to be sent offshore.

  Thank you.

  Hi VegasMav,

  I want to help you get your Photosmart C4780 all-in-One printer scans to your Mac. I see that you are running the operating system new version Mavericks now. I'm sorry to hear you had problems of blur or not image when scanning. Let us ensure that you can scan first, then we can guarantee that your scan quality is satisfactory!

  Please open the following document. This document explains how to install and use the printer with 10.9. It also includes a frequently asked questions section which covers;

  • What happens if there is no update available in Apple Software Update driver?
  • What else do I need to know the Apple Software Update driver?
  • How to scan with the Apple Software Update driver?
  • What happens if I upgraded to the Mavericks of a previous operating system to Mac address?
  • What happens if I got an error trying to install an earlier version of the software of my printer?

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  Please let me know the results of these efforts. Thank you. I look forward to hear from you.

• Cannot connect my Photosmart C4780 to my network wireless (home)

  Hello

  I searched this forum and tried to solve my problem, but none of the elaborate suggestions.

  I have a Photosmart C4780 and am under OSX10.8

  Recently, our internet provider changed our wireless router and our SSID. As a result, the printer that is connected to the original network and properly functioning has stopped working. I tried to connect the printer to the new network, but failed. He said now that the printer is connected to the hp network (something) and I can't change it for the new SSID.

  Could you please tell me what to do? I have installed the software mentioned in the HP website, plugged the USB cable into the printer to try to set it up, but it says that the printer cannot find any existing network (although I'm next to the printer and connected to the intended network wireless)

  Fact a little kind of hard-reset on the printer can be a good strategy? How can he do?

  Thanks in advance

  Pedro

  PS: The printer works correctly when printing via USB

  PS2: It is not an option to return the SSID of the router to the previous

  Hi @pedroa

  You say "I have installed the software mentioned in the HP website", but there is no software for the compatible with 10.8 c4780. Mountain V10.8 OS X Lion: installing and using the printer on a Mac with the Mountain Lion.

  As you know, this printer has not a wizard wireless version in the front panel instead us would typically connect the USB cable from the printer to the computer and run the installation wizard.

  Because you have 10.8 on Mac, and it there is no full feature software and drivers, you won't be the configuration wizard, to configure the printer. You may be wondering now, well how can I set up then?  Good question, we will restore the default network printers and the printer will have its own IP address designed for whats called an Ad-Hoc connection (wireless router). We will put the computer on the network printer and then print a report to get the printers IP address. At this point, we can access the built-in web server (EWS) and run the wireless from there. Once the printer on the network with the router, we can put the computer on the network and vuala that the printer and the computer will be on your network.

  To restore the default network settings - since you have done this before I guess you know how, but for others who can see the message, here are the steps

  1. Press the wireless button
  2. Select wireless settings
  3. Scroll and select default network.  Press Yes to recognize
  4. The radio turns off (the blue LED turns off).  You may need to press the wireless button to turn on wireless

  Put the computer on the network printer (temporary)

  1. click on the symbol of the airport on the upper left side of the screen Mac
  2. choose the network looking compared to the printer (we could say a variant of the name of your printer or HP setup) - it may take a few minutes to make it appear

  Print the wireless network test - wait a few minutes to make sure the computer have established an ad hoc connection, otherwise the report will not have an IP address

  1. Press the Scan button (it also the wireless menu button)
  2. Select wireless settings
  3. Testing wireless access, then select.

  The wireless network Test prints, search and note the IP address.

  Open a browser (Safari) and enter the IP address in the URL (address bar).

  Click on the network, on the left tab, click on wireless or 802.11.

  At this point, we are looking at fore 'start the wizard' should be on the right side.

  

  As soon as we will have to set up the printer to your network, you can put your computer on your own network.

  Now you can add the printer in system preferences and print

  Please let me know if that fixes the problem, thanks.

• HOP, 7760 Photosmart printer Mac OSX 10.6 - offline

  I got Photosmart 7760 for quite awhile and have been using it extensively with MAC OSX 10.6 until 2 days ago.  Then printing guest said that it is in offline mode.  I've been online for 2 days to look for solutions... with absolutely no success.  Downloaded the drivers... all unplugged and reconnected... downloaded the drivers.

  I can't get the printer appears in the printer preferences... I am at a loss and really, really need this printer.  There must be a solution, but my intermediate understanding of all this technology completely failed me.

  Any help - will be greatly appreciated!  Thank you!

  job1970

  I GOT IT -! I finally found a few previous posts and downloaded the universal drivers... worked instantly!

• No support fax or scan for C6180 on Mac OSX 10.5.8

  When Mac OSX 10.5.8, we discovered that the HP C6180 printer we use (wired network) only supported print. There is no driver to fax and no support of the Analyzer. The HP software asked to buy us a new printer in order to find these features.

  You can imagine our willingness not to buy a new printer when we still works fine. If HP wants us to keep buying cartridges printer HP or never buy another HP printer again then it would be reasonable to expect continuous support of drivers for printers still in the field. (it's not yet all that old...)

  Is there a solution or driver updated, please?

  Thank you, RG

  The note in the system disk refers to drivers integrated into OSX.  Upward through 10.5, they only support print (10.6 print media, scanning and fax).

  Try to uninstall using uninstaller in Applications, Hewlett-Packard folder, and then reinstall it from the link I gave you.

  If all else fails you could spend $29 and upgrade to Snow Leopard and get back disk space as well!

• Cannot scan with Photosmart C6280 with Mac OS x Snow Leopard.

  When I try to scan with my Mac, I get a scanner not found error.  I am able to print.  When I access the HP utility, it shows the printer in the installed column but it shows a Red House beside her and will not let me access it. The printer is connected to an Apple Airport Extreme, via an ethernet cable, and the airport is linked via a USB cable to the computer.

  I guess you mean that the printer and the Mac are connected to the router with Ethernet Airport?

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Cannot scan with Photosmart C5580

  Photosmart C5580, Windows XP Professional SP3 USB connection,

  Error messages:

  Everything by asking an analysis: "Can't find scan.msi" translates into a failed attempt to sweep.

  In addition, "error 1706: no valid source could be found for the analysis of the product."  Windows install cannot continue. »

  "Fatal Error".

  Thank you.

  Hi Buppa48,

  Follow the steps outlined in the document below and let me know what you find?

  Error fatal "error 1706. No valid source could be found for. "(MSI Error 1706) Message appears during Installation of the software under Windows

• HP Envy 110 - cannot scan from printer (using Mac Maverick)

  I have a MAC with OSX 10.9.4 operating system and a printer HP Envy 110 with the newest driver printer HP Maverick.  I can scan Mac.  However, I can not run a scan directly from the printer control panel.  The sign says "make sure that the HP printing software is installed.  For MAC and USB connections, "Enable Scan to Computer" is automatically activated".  Everyone else has had a similar problem?

  Hi Melnee,

  Thank you for your answer! Please, try the following solutions:

  • Reset the printing system. OS X Mavericks: reset the printing system.
  • Verify and repair disk permissions. 12.x disk utility: repair disk permissions.
  • Look at this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005.

  Hope this information is useful and have a great day!

• Laser Jet Pro 200 Color MFP: cannot scan from 10.8.5 OSX system preferences

  Have recourse to the scanner via the preferences system for 2 years. This was recommended to me at Office Depot when I bought the machine.

  Now I have 'the scannner impossible to complete the scan.

  Copy works by function (from the machine), so scanning / copy glass is OK. Printing from the computer works as well

  (connected by USB).

  Earlier today, before installing the printer v3.1 for OSX driver, I got the message "error com.apple.imagecapturecore 9930.

  I have reset the system twice.

  Am currently with all updates.

  Still does not scan.

  Any thoughts?

  Hi @PhilJ1,

  Please try these steps, it should help, How to open the applications of a developer not identified in OS X Lion mountain.

  Thank you.

• HP ENVY 5660: HP ENVY 5660 scan multiple Pages with Mac OSX?

  Hi-how to scan multiple pages using the HP ENVY 5660 with Mac OS x 10.8? I have updated the software of the scanner, clicked on "open scanner" in the printer, but see no way to scan multiple pages. Also, there is no way to add several pages on the touch screen of the printer.

  I really need to send you something to a potential employer ASAP so would be extremely grateful for any advice.

  Thank you.

  Sam

  Hello

  Don't forget to select PDF as the source file.

  Click Scan to scan the first page, once completed, click the same button to add another page and continue to use the scan button until you are finished.

  The final PDF should include any page scanned in the same session.

  Shlomi

• Photosmart C4795 MAC OSX Lion

  Since the installation of Lion, I can no longer connect wirelessly with Macbook Pro my wife.  We have AT & T U-Verse with their 2Wire Modem/Acess Point.  I deleted the drivers and installed via software update.  I can connect USB and the only instructions I see HP for the addition of a wireless option is to add a Hello type for your printer?  I don't see this option.  I saw something on an SSID is perhaps too long.  I'm not sure that I can change it on AT & T device.  I ran the test wireless to the printer and all past.  I also checked to make sure that the mac is on the same network, and it was.

  After the reboot the 2wire driver Hello appears now and I added it and it works now.  Thanks for your help on this

• Reading full drive and cannot see the files! Mac OSX 10.4.11 to 10.6.8 - 32 GB Cruzer USB Glide

  I just bought the Sandisc Cruzer Glide 32 GB flash drive to move photos from one MAC to another.

  -J' have plugged my MAC running 10.4.11 and slipped the records on that I wanted to move. I have not install or use the software Sandisc because it was compatible with 10.5

  -J' I plgged the disc in my MAC running 10.6.8 and flies files

  -J' then slipped the files on the USB in my dustbin of Macs, it looked as if they were out of it

  -J' then plugged the USB in my old MAC and the player complete bed

  Any help would be greatly appreciated and I thank you in advance for answer. Most of the responsed that I found on the forum are related to Wndows machines

  On Mac if you do not empty the trash before the USB is disconnected, it will not actually free up space. can solve the problem 2 ways.

  1. If the files are still in the trash, connect the USB drive and empty the trash. This should free up space

  2. connect the USB drive and use disk utility to erase the drive. Make sure that you use the type of file MSDOS or exFAT for the filesystem for maximum compatibility.

• Impossible to update Photoshop CC 2014 (Mac OSX) receive error U44M1I210

  Cannot update Photoshop CC 2014 (Mac OSX) receive error U44M1I210.

  Question started with notification of creative cloud on update available (2014.2)

  Followed the instructions of the support, but without success:

  computer restarted twice,

  uninstalled and reinstalled Photoshop,

  all are trying to find a direct download always lead to Panel cloud creative, returning the error message and a link to try again.

  installation image setup.dmg also ejected and reinstalled again Photoshop CC and CC 2014

  Always the same result:

  10/12/14 12:02:41:077 | [ERROR] |  |  |  |  | DLMNative |  | 41707 | UpdaterCoreHelper::StartUpdateOpCallback: Another case: 0

  10/12/14 12:02:42:289 | [INFO] |  |  |  |  |  |  | 41707 | Download updates returned to SUCCESS

  10/12/14 12:02:45:405 | [ERROR] |  |  |  |  | DLMNative |  | 41707 | UpdaterCoreHelper::StartUpdateOpCallback: Another case: 0

  10/12/14 12:02:46:617 | [INFO] |  |  |  |  |  |  | 41707 | Download updates returned to SUCCESS

  10/12/14 12:02:47:668 | [INFO] |  |  |  |  |  |  | 43376 | deployment lock has been acquired.

  10/12/14 12:02:48:774 | [ERROR] |  |  |  |  | DLMNative |  | 41707 | UpdaterCoreHelper::StartUpdateOpCallback: Another case: 0

  10/12/14 12:02:53:876 | [ERROR] |  |  |  |  | DLMNative |  | 41707 | Progress UpdaterCore returned error Code: U44M1I210

  10/12/14 12:02:53:876 | [ERROR] |  |  |  |  | DLMNative |  | 41707 | Install updates returned the error

  10/12/14 12:02:53:876 | [ERROR] | 60D8738F-DB95-4D78-8F01-DB8621EFAD01 |  |  |  | DLMNative |  | 41707 | Install updates returned 44 installation, errorCode:210

  10/12/14 12:02:53:876 | [ERROR] | 60D8738F-DB95-4D78-8F01-DB8621EFAD01 |  |  |  | DLMNative |  | 41707 | Updates: Extraction error

  What should I do?

  Thank you.

  Giovanni may there is a download error affecting this archive.  You see specific errors when reviewing the download logs?  There is information on how to resolve the errors of download, as well as the location of the download logs for error downloading applications Cloud Creative - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  As an alternative, please try using the steps listed in all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools to attempt to download and apply the applicable update directly.  Please make sure you fill the very important Instructions before clicking on the download link.